DEYE SUN-(xx)-G03 lost connection after upgrade to 1.5

hyneksuchodol commented 1 year ago

Device disconnected after upgrade. Can't connect it back. Need to downgrade to version 1.4.3.. After install back old version every think looks good. I've seen multiple issues like this in several threads.

pawelsn commented 1 year ago

I do confirm.

Solarman 1.4.3 was working fine with Deye SUN-6k-G03. No updates anymore after update to v1.5.0

With v1.5.0 I have noticed in the logs: 2023-09-06 10:29:25.170 WARNING (SyncWorker_7) [custom_components.solarman.solarman] Querying [3 - 112] failed, [0] retry attempts left 2023-09-06 10:29:25.171 WARNING (SyncWorker_7) [custom_components.solarman.solarman] Querying registers [3 - 112] failed, aborting. 2023-09-06 10:29:53.880 WARNING (SyncWorker_1) [custom_components.solarman.solarman] Querying [3 - 112] failed with exception [error: unpack requires a buffer of 220 bytes]

I use "deye_string.yaml" for Deye SUN-6k-G03 device Integration started to work again after downgrade to 1.4.3

planet-espresso commented 1 year ago

Same here, using a Deye SUN800G3-EU-230 with this custom config:

requests:
  - start: 0x0003
    end:  0x0080
    mb_functioncode: 0x03

parameters:
  - group: solar
    items: 
    - name: "PV1 Voltage"
      class: "voltage"
      state_class: "measurement"
      uom: "V"
      scale: 0.1
      rule: 1
      registers: [0x006D]
      icon: 'mdi:solar-power'

    - name: "PV2 Voltage"
      class: "voltage"
      state_class: "measurement"
      uom: "V"
      scale: 0.1
      rule: 1
      registers: [0x006F]
      icon: 'mdi:solar-power'

    - name: "PV1 Current"
      class: "current"
      uom: "A"
      scale: 0.1
      rule: 1
      registers: [0x006E]
      icon: 'mdi:solar-power'

    - name: "PV2 Current"
      class: "current"
      state_class: "measurement"
      uom: "A"
      scale: 0.1
      rule: 1
      registers: [0x0070]
      icon: 'mdi:solar-power'

    - name: "Daily Production"
      class: "energy"
      state_class: "total"
      uom: "kWh"
      scale: 0.1
      rule: 1
      registers: [0x003C]
      icon: 'mdi:solar-power'

    - name: "Total Production"
      class: "energy"
      state_class: "total_increasing"
      uom: "kWh"
      scale: 0.1
      rule: 3
      registers: [0x003F,0x0040]
      icon: 'mdi:solar-power'
      validation:
        min: 0.1

  - group: Grid
    items:
    - name: "AC Voltage"
      class: "voltage"
      state_class: "measurement"
      uom: "V"
      scale: 0.1
      rule: 1
      registers: [0x0049]
      icon: 'mdi:transmission-tower'

    - name: "AC Output Frequency"
      class: "frequency"
      state_class: "measurement"
      uom: "Hz"
      scale: 0.01
      rule: 1
      registers: [0x004F]
      icon: 'mdi:home-lightning-bolt'

  - group: Inverter
    items:
    - name: "Running Status"
      class: ""
      state_class: ""
      uom: ""
      scale: 1
      rule: 1
      registers: [0x003B]
      isstr: true
      lookup:
      - key: 0
        value: "Stand-by"
      - key: 1
        value: "Self-check"
      - key: 2
        value: "Normal"
      - key: 3
        value: "Warning"
      - key: 4
        value: "Fault"
      icon: 'mdi:home-lightning-bolt'

    - name: "Total AC Output Power (Active)"
      class: "power"
      state_class: "measurement"
      uom: "W"
      scale: 0.1
      rule: 3
      registers: [0x0056, 0x0057]
      icon: 'mdi:home-lightning-bolt'

    - name: "Radiator Temperature"
      class: "temperature"
      uom: "°C"
      state_class: "measurement"
      scale: 0.01
      rule: 1
      offset: 1000
      registers: [0x005a]

    - name: "Inverter ID"
      class: ""
      state_class: ""
      uom: ""
      scale: 1
      rule: 5
      registers: [0x0003,0x0004,0x0005,0x0006,0x0007]
      isstr: true

after upgrading the plugin (and restoring the custom config file)was no longer able to read out the value an generated lotś of errors like this:

home assistant solarman failed with exception [Illegal Data ValueError: The value contained in the request data field is not an allowable value

downgrading solved the problem

--- UPDATE ---

from https://github.com/StephanJoubert/home_assistant_solarman/pull/224 I can see that the converter should have been working with the provided _deye2mppt.yaml but in my case it also did not work