search

StephenBlackWasAlreadyTaken / xDrip

Android Application that collects dex signals, allows calibrations, and uploads
GNU General Public License v3.0
208 stars 176 forks source link

Add calibration problem #187

Closed daandyc closed 7 years ago

daandyc commented 7 years ago

My Animas vibe, cgm, xDrip and nightscout has worked well for 12 months until I replaced the tansmitter. The pump accepted the change without any problems, but the xDrip app refuses to be calibrated. The System Status says all is well and has accepted the new transmitter. The xDrip app counts down the 2 hours before double calibration, but when it concludes it says in red 'Please wait, need 2 readings from transmitter first.' and the option 'Add calibration' is missing from the menu. It seems that the wixell box of tricks is not sending any sensor data in spite of my programming it to the new sensor, and the Bluetooth connection is up and running. I have tried reprogramming the Wixell again, reinstalling the latest edition of the xDrip app. all to no avail. Any ideas of what might be wrong and ways to sort it? How can I tell that the reprogramming of the Wixell has been successful? I would be very grateful for any suggestions. Andy

daandyc commented 7 years ago

Solved ! By turning off both the xDrip Wixel device and the android phone at the same time and turning them back on again !!