Closed Strooom closed 1 year ago
The D+/D- differential pair is not impedance-controlled. The recommendation is a minimal clearance of 0.127 mm (at JLCPCB without a negative price impact). The trace width is about 0.8 mm. The pair is short, so this can be omitted
Decided to leave it as it is, making the trace 0.8 mm requires to move many components..
The D+/D- differential pair is not impedance-controlled. The recommendation is a minimal clearance of 0.127 mm (at JLCPCB without a negative price impact). The trace width is about 0.8 mm. The pair is short, so this can be omitted