Subhankar2000 MSP430G2553-Proteus-v8.9-Simulation issues

Subhankar2000 / MSP430G2553-Proteus-v8.9-Simulation

This is my repository where I am storing all my Proteus v8.9 Project Files and these are project files for simulation of Texas Instrument’s MSP430G2553 microcontroller with various example programs. I am keeping the Proteus design files only and some .HEX, .ELF, and .INO files.

https://subhankar2000.github.io/MSP430G2553-Proteus-v8.9-Simulation/

Other

9 stars 6 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Hardware Timer + ADC Simulations & anything dependent on them are not working as intended(No Simulation Errors)Exp 19, 20, 21, 22, 23, 24, 25, 28, 29, 30, 31, 32, 33, 34 are not working as intended__But you can still interact with them, see oscilloscope/other measurements

#11 Subhankar2000 opened 3 years ago
4
More Documentation is needed for using energia compiled HEX files and CCS compiled ELF files and/or other Proteus environment setting up related issue

#10 Subhankar2000 closed 3 years ago
1
Update issue templates

#9 Subhankar2000 closed 3 years ago
0
Create CONTRIBUTING.md

#8 Subhankar2000 closed 3 years ago
0
Create CODE_OF_CONDUCT.md

#7 Subhankar2000 closed 3 years ago
0
Delete CONTRIBUTING.md

#6 Subhankar2000 closed 3 years ago
0
Delete CODE_OF_CONDUCT.md

#5 Subhankar2000 closed 3 years ago
0
Create LICENSE

#4 Subhankar2000 closed 3 years ago
0
Port 1 pin 4 (P1.4) is not working as programmed__So, I am just changing every P1 pin 4 to P2 pin 4 or P3 pin 4 as needed

#3 Subhankar2000 opened 3 years ago
1
"Exp09_LunchBox_HelloResetSource" not working(No Simulation Errors) but can't get the desired output__Still you can still interact with them, see oscilloscope/other measurements

#2 Subhankar2000 opened 3 years ago
0
Can't manage to get Hardware UART working__So, I left the hardware UART, I have managed to get software UART working

#1 Subhankar2000 opened 3 years ago
0