Closed praveentcom closed 3 years ago
@Sunoo can look into the issue once you are available?
If you connect to wherever you are running Homebridge, are you able to ping 192.168.0.111
?
It seems like the IP was changed to 192.168.0.110 in the router. I changed it in the homebridge plugin setup, and now it works like a charm! ❤️
Fantastic, glad you were able to sort it out.
Having the same error from a camera that has worked fine up until a few months ago. It's a Wyze Cam with rstp firmware. 9 cameras In Total, all work fine except one. I can ping from the homebridge server (pi) the Wyze app sees this camera fine. Not sure where else to look ty for any direction
@fratinize Can you ping the camera from your Homebridge server?
Yes
Sent from my iPhone
On Sep 25, 2021, at 10:32 AM, David Maher @.***> wrote:
@fratinize Can you ping the camera from your Homebridge server?
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub, or unsubscribe.
I Must apologized I swore I saw a reply no I can not destination Host unreachable
But why are all other cameras fine?
Sent from my iPhone
On Sep 25, 2021, at 10:48 AM, Frank Petrallo @.***> wrote:
Yes
Sent from my iPhone
On Sep 25, 2021, at 10:32 AM, David Maher @.***> wrote:
@fratinize Can you ping the camera from your Homebridge server?
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub, or unsubscribe.
Third Times the Charm, Sorry (
I can Ping this Camera! 100%
@.***:~ $ ping 192.168.1.126 PING 192.168.1.126 (192.168.1.126) 56(84) bytes of data. 64 bytes from 192.168.1.126: icmp_seq=1 ttl=64 time=108 ms 64 bytes from 192.168.1.126: icmp_seq=2 ttl=64 time=23.2 ms 64 bytes from 192.168.1.126: icmp_seq=3 ttl=64 time=1.68 ms 64 bytes from 192.168.1.126: icmp_seq=4 ttl=64 time=4.26 ms 64 bytes from 192.168.1.126: icmp_seq=5 ttl=64 time=4.40 ms 64 bytes from 192.168.1.126: icmp_seq=6 ttl=64 time=2.63 ms 64 bytes from 192.168.1.126: icmp_seq=7 ttl=64 time=3.16 ms 64 bytes from 192.168.1.126: icmp_seq=8 ttl=64 time=3.10 ms 64 bytes from 192.168.1.126: icmp_seq=9 ttl=64 time=4.26 ms 64 bytes from 192.168.1.126: icmp_seq=10 ttl=64 time=7.98 ms 64 bytes from 192.168.1.126: icmp_seq=11 ttl=64 time=6.09 ms 64 bytes from 192.168.1.126: icmp_seq=12 ttl=64 time=8.83 ms 64 bytes from 192.168.1.126: icmp_seq=13 ttl=64 time=3.50 ms
On Sep 25, 2021, at 10:32 AM, David Maher @.***> wrote:
@fratinize https://github.com/fratinize Can you ping the camera from your Homebridge server?
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/Sunoo/homebridge-camera-ffmpeg/issues/1151#issuecomment-927129703, or unsubscribe https://github.com/notifications/unsubscribe-auth/AHCD4EZ35VQICS5XCKDZ2QDUDXMRHANCNFSM5ACVI2OA.
Sorry Found a typo from a Previously restored backup. Sorry log it as a ID10t problem
Enjoy your weekend
On Sep 25, 2021, at 10:32 AM, David Maher @.***> wrote:
@fratinize https://github.com/fratinize Can you ping the camera from your Homebridge server?
— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/Sunoo/homebridge-camera-ffmpeg/issues/1151#issuecomment-927129703, or unsubscribe https://github.com/notifications/unsubscribe-auth/AHCD4EZ35VQICS5XCKDZ2QDUDXMRHANCNFSM5ACVI2OA.
My RTSP URL is rtsp://praveen:tapocamera@192.168.0.111:554/stream1
I use a Tapo C200 camera and followed the config as suggested by the repo. The stream works flawlessly in the VLC player when tested but is throwing errors in the Homebridge console. Attaching the screenshots of the error and the config. Please correct me if I am using any parameters wrongly.
'
This is from the VLC player: