Customizing Dial Plan for 2 Clients for IPKall/SipGate number respectively

[GoogleCodeExporter]

I want to create/find a dialplan that will allow me to route calls from IPKall 
number to client number one and calls from SipGate number to client number two. 
 The two clients are regular telephones connected to the two ports on my 
Linksys PAP2-NA, which are both able to log into sipsorcery.  Any links to 
point me in the right direction will be great.
Thanks.

Original issue reported on code.google.com by seld...@gmail.com on 19 Mar 2011 at 2:02

[GoogleCodeExporter]

Thanks for opening a ticket. It sounds like you're going to need an inbound 
dialplan. In addition, since our scripts use SIP Sorcery's ability to "fake" an 
outbound call, some special handling is going to need to happen in order to 
know which phone to use for the second half of the outbound call. Have you 
posted this to the SIP Sorcery forum? Or did Mike send you here?

Original comment by easter...@gmail.com on 19 Mar 2011 at 3:30

• Changed state: Started
• Added labels: Priority-Low, Type-Enhancement
• Removed labels: Priority-Medium, Type-Defect

[GoogleCodeExporter]

In fact, you can do without the "In" dial plan. You need to create a new SIP 
account (go to Sipsorcery / SIP accounts); name it, for example, myipkall (the 
name must be unique within sipsorcery.com domain, can take several attempts 
before you find available name).

Make Sipsorcery register to Sipgate. You'll find "Register contact" under SIP 
provider settings for Sipgate; this contact points to your "main" Sipsorcery 
account. Thus, you need to register "Sipgate" channel of your ATA to your main 
Sipsorcery account.

IPKall ATA should register to myipkall@sipsorcery.com; configure IPKall to 
forward incoming calls to this address.

Leave the "In Dial Plan" field blank for both SIP accounts and Sipsorcery will 
automatically forward incoming calls to bound ATAs.

Original comment by mte...@gmail.com on 19 Mar 2011 at 5:52

• Changed state: Done

[GoogleCodeExporter]

Thanks for the response.  I'll google for sipsorcery and Inbound dialplan.  I 
don't know Mike.  I will post this in the SIP Sorcery forum and see what comes 
up.  Please keep this open a little while longer incase someone else has some 
more to add and if I find out how to do this, I'll post a response here as well.

Original comment by seld...@gmail.com on 19 Mar 2011 at 5:55

[GoogleCodeExporter]

Just configure your accounts and ATA as above, should work right away. I'll 
keep the ticket open.

Original comment by mte...@gmail.com on 19 Mar 2011 at 6:24

• Changed state: Started

[GoogleCodeExporter]

Any updates on this, Seldeen? I'm cleaning up old tickets hanging open around 
here.

Original comment by easter...@gmail.com on 1 Mar 2012 at 10:33

[GoogleCodeExporter]

Thanks for checking.  No further updates.  Please close.

On Thu, Mar 1, 2012 at 2:34 PM, <
google-voice-sipsorcery-dialplans@googlecode.com> wrote:

Original comment by seld...@gmail.com on 1 Mar 2012 at 11:19

[GoogleCodeExporter]

Thanks for letting me know, and thanks for using ticketing system.

Original comment by easter...@gmail.com on 1 Mar 2012 at 11:22

• Changed state: Done