jonoxer
commented
4 years ago Thanks for the bug report.
I think this problem arose because I was originally developing this on an ESP32 using a 240x240 LCD with SPI interface, and I merged several different projects together to make the version to run on the ESP8266 using the I2C OLED display. The GPIO0 reset comment is a holdover from that SPI interface. However, this doesn't explain why the code works on my devices when it looks like it shouldn't.
In any case your changes look correct to me. I've just edited the code and it compiles fine, so I'll test it on one of my sensors to verify that it still works. If it does I'll update the code here.
Cheers :-)
I don't know why this only affects me, but with your deprecated use of Adafruit_SSD1306 OLED(NULL), I got a stack dump every time around the loop.
In fact according to https://adafruit.github.io/Adafruit_SSD1306/html/class_adafruit___s_s_d1306.html
Your call does not even seem to be deprecated - just wrong - because a single argument should either be the reset pin or -1
I looked at the Adafruit example code, and added the following lines to the declarations:
include
define SCREEN_WIDTH 128 // OLED display width, in pixels
define SCREEN_HEIGHT 32 // OLED display height, in pixels
define OLED_RESET -1 // Reset pin # (or -1 if sharing Arduino reset pin)
And replaced your call Adafruit_SSD1306 OLED(NULL); // GPIO0 = OLED reset pin with Adafruit_SSD1306 OLED(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, OLED_RESET);
After that it appeared to work.
However, I'm not sure about your comment (GPIO0 = OLED reset pin)
Can you confirm that my use of -1 is correct, that is sharing the processor reset pin? The OLED does not have a reset pin and either GPIO0 nor the RST pins of the Wemos D1 are used.
Thanks.