External sensor not working on esphome 2022.8.3

[AntoxaSa]

Please help. On esphhome 2022.3.1, the external sensor works. I just upgrade to version 2022.8.3, the external sensor is not available

Enable Web server.

web_server: port: 80

captive_portal:

Sync time with Home Assistant.

time:

• platform: homeassistant id: homeassistant_time

Text sensors with general information.

text_sensor:

Expose ESPHome version as sensor.

• platform: version name: ESPHome Version

  Expose WiFi information as sensors.

• platform: wifi_info ip_address: name: IP ssid: name: SSID bssid: name: BSSID sensor:
  • platform: homeassistant name: "Внеший датчик(AIRMONITOR)" id: espresence_studio_temp entity_id: sensor.cleargrass_air_temperature on_value: then:
    • lambda: |- if(id(espresence_studio_temp).has_state()) { // use ha sensor temp id(msz_hr25vf_hp).set_remote_temperature(x); // ESP_LOGW("temperature", "using remote temp %.2f", x); } else { // use internal temp id(msz_hr25vf_hp).set_remote_temperature(0);
      ESP_LOGW("temperature", "using internal temp"); }

Sensors with general information.

  # Uptime sensor.

• platform: uptime name: Uptime

  WiFi Signal sensor.

• platform: wifi_signal name: WiFi Signal update_interval: 60s

external_components:

• source: github://geoffdavis/esphome-mitsubishiheatpump

climate:

• platform: mitsubishi_heatpump id: msz_hr25vf_hp name: "Кондиционер" update_interval: 500ms hardware_uart: UART0 supports: mode: [HEAT_COOL, HEAT, COOL, DRY, FAN_ONLY] fan_mode: [AUTO, DIFFUSE, LOW, MEDIUM, MIDDLE, HIGH] swing_mode: ['OFF', VERTICAL] visual: min_temperature: 16 max_temperature: 31 temperature_step: 0.5