[MAINTENANCE] synocommunity.com down

[Diaoul]

Due to performance issues, the server will be down for maintenance for a few days.

Manual downloads available at: http://synocommunity.com/packages/

[lihoru99]

The Packages could be back today? By the way, I found after the update of DSM 5.1, the new installation of Transmission is no longer has an icon in Synology start menu, the only way to access is through packages center. My device is 415play. Hope can fix it. Thanks.

[Superturk10]

When is the server getting back on? And if not soon, how do i install the manual downloads from http://synocommunity.com/packages/ ?

[piwi82]

This is similar to DSM 4.3 : https://www.synology.com/en-us/knowledgebase/tutorials/500#t2.3

[Superturk10]

The only problem is, i don't speak/read french...

Verstuurd vanaf mijn iPhone 6 Plus

Op 22 jan. 2015 om 8:21 p.m. heeft Piwi notifications@github.com het volgende geschreven:

This is similar to DSM 4.3 : https://www.synology.com/fr-fr/knowledgebase/tutorials/500#t2.3

— Reply to this email directly or view it on GitHub.

[piwi82]

Link updated.

[Superturk10]

What should i choose... #Confused

[piwi82]

Find your architecture here : https://github.com/SynoCommunity/spksrc/wiki/Architecture-per-Synology-model

[DieBruine]

And don't forget to change the Trust Level to "any publisher" under Package Center Settings.

[karpertje]

I am new with using a synology nas. I have a ds 214 se . in want to use sapnzb. Wich version pyton and sapnzb must i instal.

[uichiban]

Hi everybody ! i need some help if anyone could help me that would be greate :)

I make a synology with sickbeard+sickbeard custom installed. it's a gift for a friend at hospital and whene i try to install SB he tell me i need to install python 2.7.3-3 and i dont have it by the center package, i can't find anywhere on my search.

I need it to make my installation complete because he dosent accept the other version

What can i do ?

Regards uichiban

[DieBruine]

Use piwi82's link to check which version you need. Then download it manually at http://synocommunity.com/packages/python/11/ . It's all here on this page ;) .

[karpertje]

Oké DieBruine i understand that but witch version do i need python_11_armada370_4458.spk or python_11_armada370-_1594. spk. Is this the same for the sapnzb version. As i said everything about the nas is new for me

Verstuurd vanaf mijn iPad

Op 24 jan. 2015 om 14:08 heeft DieBruine notifications@github.com het volgende geschreven:

Use piwi82's link to check which version you need. Then download it manually at http://synocommunity.com/packages/python/11/ . It's all here on this page ;) .

— Reply to this email directly or view it on GitHub.

[Superturk10]

Je moet je eigen soort kiezen bijv. de DS115J gebruikt armada370. Kijk hier wat die van jouw is, https://github.com/SynoCommunity/spksrc/wiki/Architecture-per-Synology-model

Op 24 jan. 2015 om 3:00 p.m. heeft karpertje notifications@github.com het volgende geschreven:

Oké DieBruine i understand that but witch version do i need python_11_armada370_4458.spk or python_11_armada370-_1594. spk. Is this the same for the sapnzb version. As i said everything about the nas is new for me

Verstuurd vanaf mijn iPad

Op 24 jan. 2015 om 14:08 heeft DieBruine notifications@github.com het volgende geschreven:

Use piwi82's link to check which version you need. Then download it manually at http://synocommunity.com/packages/python/11/ . It's all here on this page ;) .

— Reply to this email directly or view it on GitHub.

— Reply to this email directly or view it on GitHub.

[karpertje]

Dat begrijp ik superturk10 , maar je hebt verschillende versie's van SAPnzb en python voor de armada370. Dus mijn vraag is welke versie van beide moet ik hebben?

[Superturk10]

Persoonlijk neem ik de gene met de hoogste nummer

Verstuurd vanaf mijn iPhone 6 Plus

Op 24 jan. 2015 om 3:17 p.m. heeft karpertje notifications@github.com het volgende geschreven:

Dat begrijp ik superturk10 , maar je hebt verschillende versie's van SAPnzb en python voor de armada370. Dus mijn vraag is welke versie van beide moet ik hebben?

— Reply to this email directly or view it on GitHub.

[uichiban]

"Use piwi82's link to check which version you need. Then download it manually at http://synocommunity.com/packages/python/11/ . It's all here on this page ;) ."

Yes i try version of your link, but i need the 2.7.3-3 especialy and not other version for install SB.

How can i do ? i need the 2.7.3-3 for the 88f628x processor, :)

EDIT: I'ts ok that work even it's not the 2.7.3-3 great thank you sir

[aamri111]

Hi everyone. I cannot find sonarr in the packages list. can anyone help me to get the spk file for sonar. I am using a synology ds1815+

[Dr-Bean]

@uichiban No, you can use 2.7.3-3 or higher, as long as you use Python 2 (do not use the Python3 package) @aamri111 The package is called nzbdrone due to backwards compatibility.

[aamri111]

@Dr-Bean Thanks! I was looking for the file for 2 days. You are a life saver :)

[Jeniccs]

Hi there, I'd like to install ownCloud using the Synology DSM but it does not working because the source http://packages.synocommunity.com/ is not there. Is it because of the maintenance? Or how can I install ownCloud manually?

[aamri111]

@Jeniccs You can access the below link and dowload it manually http://synocommunity.com/packages/

You may need to check the spk compatibility using the below link

https://github.com/SynoCommunity/spksrc/wiki/Architecture-per-Synology-model

[LongChair]

Is there any ETA on the website / repo to be back ... redirection still mention jan 21st ? :)

[Jeniccs]

@aamri111 Thank you for the links! I've tried to install the package manually but this still didn't worked because the source of the package is unknown. But I can't add the SynoCommunity to the packages becuase the source was not found...

[Diaoul]

I am still working on it. Salt makes this a little harder than expected.

[Superturk10]

What is the definition of "salt"?

Op 24 jan. 2015 om 7:29 p.m. heeft Antoine Bertin notifications@github.com het volgende geschreven:

I am still working on it. Salt makes this a little harder than expected.

— Reply to this email directly or view it on GitHub.

[aamri111]

@Jeniccs make sure you change the trust level to any publisher you can change that from the setting. You can't add SynoCommunity right now its down.

[Jeniccs]

@Diaoul Take your time! Dates are unimportant, simple make sure, everything works.

[Jeniccs]

@aamri111 Thanks, you were right again :) But ownCloud can not be installed because the Directory does not exist. What did I wrong? And let me be honest, I'm a noob...

[Diaoul]

SaltStack is a tool for provisioning a server (and much more)

[aamri111]

@Jeniccs I haven't used this app before :) but try to leave it empty or change the directory to a shared folder found in volume1

[Jeniccs]

@aamri111 It's still not working :( But thanks a lot for yor help and advices!

[Conq1942]

How can I help @Diaoul :(

[cow-brat]

I want to download transmission for my Synology 110j. I found out, that it has 88f6281 architecture. But the folder "transmission" has five sub-folders: "6", "7", "8", "9", "10". What does they mean? Which to choose? Moreover, when i download file from randomly chosen folder "10" it has extension "tar" but i need "spk". Can you advice me something?

[Superturk10]

I am wondering why your 100J still hasen't burned out... But i personally choose the highest with spk. If 10 doesn't have it go to 9 and if that doesn't have it got 8. Just go on and on...

Op 25 jan. 2015 om 10:03 a.m. heeft cow-brat notifications@github.com het volgende geschreven:

I want to download transmission for my Synology 100j. I found out, that it has 88f6281 architecture. But the folder "transmission" has five sub-folders: "6", "7", "8", "9", "10". What does they mean? Which to choose? Moreover, when i download file from randomly chosen folder "10" it has extension "tar" but i need "spk". Can you advice me something?

— Reply to this email directly or view it on GitHub.

[cow-brat]

@Superturk10 Why it should?

Ok. But why in the status bar i can see spk package, but when i start to download it, it turns out to be tar?

https://www.dropbox.com/s/dw8klfz8w2vcask/2015-01-25%2012.12.50.png?dl=0 https://www.dropbox.com/s/j04bk81p3mgsdyv/2015-01-25%2012.13.49.png?dl=0

[Superturk10]

It's your browser. Use Google Chrome

Op 25 jan. 2015 om 10:17 a.m. heeft cow-brat notifications@github.com het volgende geschreven:

@Superturk10 Why it should?

Ok. But why in the status bar i can see spk package, but when i start to download it, it turns out to be tar?

https://www.dropbox.com/s/dw8klfz8w2vcask/2015-01-25%2012.12.50.png?dl=0 https://www.dropbox.com/s/j04bk81p3mgsdyv/2015-01-25%2012.13.49.png?dl=0

— Reply to this email directly or view it on GitHub.

[cow-brat]

@Superturk10 Oh, thanks. But none of the five files "88f6281" i was able to install. It's pity.

[Superturk10]

I think because your Synology is outdated

Op 25 jan. 2015 om 10:38 a.m. heeft cow-brat notifications@github.com het volgende geschreven:

@Superturk10 Oh, thanks. But none of the five files "88f6281" i was able to install. It's pity.

— Reply to this email directly or view it on GitHub.

[ghost]

If there was a way, I'd love to host a mirror to continue providing these files to the syno community. Msg me.

[Diaoul]

The repository will be back in a few days. I'm almost done with the basic configuration.

[Superturk10]

Why did it actually take so long?

Op 26 jan. 2015 om 9:01 a.m. heeft Antoine Bertin notifications@github.com het volgende geschreven:

The repository will be back in a few days. I'm almost done with the basic configuration.

— Reply to this email directly or view it on GitHub.

[Diaoul]

Because I have dissociated the repository source code from SynoCommunity, changed OS to Ubuntu Server for python3 >=3.3, used SaltStack instead of Fabric for better robustness, changed from mariadb to postgresql to hopefuly solve performance issues.

[plopes1960]

@Diaoul can you help me to install manually python and transmission on my Synology 212j with DSM 5.1

[piwi82]

@plopes1960 : You can download the packages manually here : http://synocommunity.com/packages/ and install them manually through the Package Center. If you don't know how to proceed, just wait for the repository to be back online.

[plopes1960]

but if you could explain how to do it, all of us that don't know, it will be much better

[egeerardyn]

@plopes1960 From http://synocommunity.com/packages/ you can find the SPK files you need. To know which SPK you need, you need to know the architecture of our NAS, e.g. from https://github.com/SynoCommunity/spksrc/wiki/Architecture-per-Synology-model Then you can upload the SPK to your NAS using the approach shown in https://www.synology.com/en-us/knowledgebase/tutorials/500#t2.3

This has all been mentioned in this thread before.

However, I would advise against installing SPKs manually if you don't know what you are doing: rather wait a few days for the repository to become available again.

[plopes1960]

Ok, I have ds212j - architecture 88f6281, so I need spk transmission_10_88f628x_1594.spk-1.tar, but I remember that I need python as weel. Wich python do I need? Python or python 3?

[egeerardyn]

@plopes1960 That's exactly why I advise NOT to install manually: you need to take care of these dependencies by hand while installing a single package is already outside your comfort zone.

Just wait for the repo to come back online, that should happen in a few days. It is much less of a hassle than trying to fix your package manager if you would do something wrong.

[plopes1960]

thanks in advance... but if now oneelse tell us the way to do it,... Even if the server it's up and running, I would like to know how to do it in case the server goes off again

[gvdhoven]

One question not answered here; if i know my architecture and succesfully installed the required packages manually... What if the repo comes back online and i can add the repo to my 'sources' after that. Will future updates work automatically? Or do i have to remove the packages and install them through the repo?