search

TBSniller / piccap

PicCap - Hyperion Sender App | Ambilight for LG WebOS TVs
MIT License
294 stars 28 forks source link

Receiver: Disconnected #76

Closed bkbartk closed 11 months ago

bkbartk commented 11 months ago

Probably it's me but I can't get it to work I tried installing either Hyperion or HyperHDR(not on the same time) on my WebOS tv. Then configure piccap to 127.0.0.1 port 19400 but it keeps saying receiver:disconnected.

In the webinterface op hyperrion or HyperHDR no screencaptures are showing up.

The goal is the grep the RGB value in homeassistant so I can sync other devices with it. but probably I'm missing some crucial point here.

Also, but this is another thing, I don't own a magic remote, and using the other remote it's inpossible the leave the checkbox fields under settings, therefore you cannot change the checkboxed because you won't be able to navigate to save.

TBSniller commented 11 months ago

Hey there, can you confirm you can reach Hyperion/HyperHDR configuration page? Can you please also provide some more information regarding your TV? grep -h -E '"(hardware_id|core_os_release|product_id|webos_manufacturing_version|board_type)"' /var/run/nyx/* Please also tell us which capture backend is used. You can get this Info from bottom right corner.

Normal remote navigation should work in latest PicCap releases.

bkbartk commented 11 months ago

can you confirm you can reach Hyperion/HyperHDR configuration page? image `yes I can on port 8090 Can you please also provide some more information regarding your TV? grep -h -E '"(hardware_id|core_os_release|product_id|webos_manufacturing_version|board_type)"' /var/run/nyx/*

webOS TV 4.9.7 LGwebOSTV

~ # grep -h -E '"(hardware_id|core_os_release|product_id|webos_manufacturing_ver
sion|board_type)"' /var/run/nyx/*
    "board_type": "K5LP_DVB",
    "hardware_id": "HE_DTV_W19P_AFADABAA",
    "product_id": "49UM7050PLF",
    "core_os_release": "4.9.7-17",
    "webos_manufacturing_version": "05.30.40",
~ #

Please also tell us which capture backend is used. You can get this Info from bottom right corner. the full text says: State: Status info refreshed | Receiver: Disconnected | UI: Capturing with libgm_backend.so | Video: Capturing with libdile_vt_backend.so | FPS 30.10

Normal remote navigation should work in latest PicCap releases. -according to homebrew I have version 0.4.3 installed I can change all I need, but not the checkboxes "Local socket", "Autostart", "VSync" because as soon as I chane it the focus is lockec and I can't move away using the arrows.

bkbartk commented 11 months ago

I typed the IP again, and now Receiver says "connected" So I guess a leading or trailing space, sorry to bother you with this.

for the checkbox unfortunately, I can't get "autostart" to be enabled,

bkbartk commented 11 months ago

I downloaded an app on my phone which can handle the magic pointer, so all setting I can use now.