search

TGTSoraham / NextGen_Workflow

1 stars 0 forks source link

17.07.15 Test specification #15

Closed TGTSoraham closed 9 years ago

TGTSoraham commented 9 years ago

Send the first test specification to P'Yod and wait for his comment.

TGTSoraham commented 9 years ago

comment from P'Yod

  1. edit the picture to show bypass path of the LED driver
  2. to test MCU to MCU communication, should use LED as a output of testing
  3. ethernet testing, edit ping from 100 times to 1000 times
TGTSoraham commented 9 years ago

finish the test specification version 1.1 send to P'Yod and wait for review

TGTSoraham commented 9 years ago

comment from P'Yod

  1. each testing module should independent, not depend or use other module to display result
  2. have to create test case in excel
  3. when use LED indicator should tell the tester where the LED is used
  4. add new 1 test case. control LED by BB send command to NN and NN send command to LED
  5. add instruction to install resistor for bypass LED to BB before test LED bypass
TGTSoraham commented 9 years ago

finish editing the test specification to meet new comment from P'Yod. Send the test specification to P'Yod and wait him to review.

TGTSoraham commented 9 years ago

comment from P'Yod

  1. the test specification is ok
  2. add to tgt template(keep the cover and table of content)
  3. add test case in table to test specifcation
TGTSoraham commented 9 years ago

finish editing the test specification to meet new comment from P'Yod. Send the test specification to P'Yod and wait him to review.

TGTSoraham commented 9 years ago

finish the test specification

TGTSoraham commented 9 years ago

Review from P'Yod

  1. change figure "J3 Connector" to "Connector"
  2. SPI from BB to NN BP have to pass FPGA 2.1 in BB use SPI4
TGTSoraham commented 9 years ago

comment from P'Long

  1. LED test should separate each LED color
  2. EEPROM should test every page in flash memory
  3. fan spin change from 5 second to fan spin for a while and then stop
TGTSoraham commented 9 years ago

finish editting