Open TacocaTYT opened 1 year ago
Andesite Bearing -> 1 iron ring + 6x stone ball bearing + 2 iron ingot
stone ball bearing -> sanding a pebble
pebble -> cobblestone in a biomancy machine
iron rod -> copper file + iron ingot
copper gregtech tools should be rather weak but accessible pre-machinery becasue soft metal
copper file -> 2x copper sheet + stick
copper sheet -> copper hammer + copper ingots
TO BE ADDED: Andesite Bearing, Stone Ball Bearing, Pebble, Copper Greg Tools
resin printed circuit boards made with sequenced assembly, resin circuit boards made by spouting liquid resin (custom fluid) onto wood plate a few times then low heat pressed?
Liquid Resin -> phenol + slime phenol -> wood tar mixed for a long time in a low heat basin wood tar obtainable via extractor
TO BE ADDED: Liquid Resin
basic electronic circuit -> printed resin curcuit board 3x sequenced assembly: resistor, resin circuit board, resistor, low heated press, vacuum tube, electrum wire spool, low heated press, vacuum tube, electrum wire spool, low heated press
Vacuum Tube -> glass tube 3x sequenced assembly: copper ring, electron tube, electrum wire, low heated press
Resistor -> coal dust 2x sequenced assembly: coal dust, coal dust, press, copper wire spool, liquid resin, low heated press, paper
all foils should be made in a rolling mill
ATM this means adding shit like bearings (made of other parts of course) and other similar dodads which are part of creating create devices