Closed CybR37 closed 6 years ago
The logs : "<4>[ 0.250457] WARNING: at arch/arm/mach-msm/subsystem_restart.c:684 subsys_restart_init+0xec/0x120()
<4>[ 0.250457] Modules linked in: <4>[ 0.250518] [All the logs : "0xfff00000 - 0xfffe0000 ( 896 kB)
<5>[ 0.000000] vmalloc : 0xe3000000 - 0xff000000 ( 448 MB) <5>[ 0.000000] lowmem : 0xc0000000 - 0xe2e00000 ( 558 MB) <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) <5>[ 0.000000] .text : 0xc0008000 - 0xc0efc400 (15313 kB) <5>[ 0.000000] .init : 0xc0f00000 - 0xc1019e40 (1128 kB) <5>[ 0.000000] .data : 0xc101a000 - 0xc11893c8 (1469 kB) <5>[ 0.000000] .bss : 0xc11893ec - 0xc1549aa8 (3842 kB) <6>[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-0, MinObjects=0, CPUs=4, Nodes=1 <6>[ 0.000000] Preemptible hierarchical RCU implementation. <6>[ 0.000000] NR_IRQS:953 <6>[ 0.000000] tvec base lock initialized for cpu0 <6>[ 0.000000] hrtimer base lock initialized for cpu0 <6>[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms <6>[ 0.000000] Console: colour dummy device 80x30 <6>[ 0.000152] Calibrating delay loop (skipped) preset value.. 13.53 BogoMIPS (lpj=67678) <6>[ 0.000183] pid_max: default: 32768 minimum: 301 <6>[ 0.000396] Security Framework initialized <6>[ 0.000457] SELinux: Initializing. <7>[ 0.000488] SELinux: Starting in permissive mode <6>[ 0.000610] Mount-cache hash table entries: 512 <6>[ 0.001770] Initializing cgroup subsys debug <6>[ 0.001770] Initializing cgroup subsys cpuacct <6>[ 0.001800] Initializing cgroup subsys freezer <6>[ 0.001831] CPU: Testing write buffer coherency: ok <6>[ 0.002105] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 <6>[ 0.002105] hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available <6>[ 0.002227] Setting up static identity map for 0x80bca660 - 0x80bca6e8 <3>[ 0.002258] set_dload_mode <1> ( c0f110d4 ) <6>[ 0.003204] tvec base lock initialized for cpu1 <6>[ 0.003204] hrtimer base lock initialized for cpu1 <6>[ 0.004608] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 <6>[ 0.005004] tvec base lock initialized for cpu2 <6>[ 0.005004] hrtimer base lock initialized for cpu2 <6>[ 0.006286] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 <6>[ 0.006683] tvec base lock initialized for cpu3 <6>[ 0.006683] hrtimer base lock initialized for cpu3 <6>[ 0.007934] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 <6>[ 0.008056] Brought up 4 CPUs <6>[ 0.008056] SMP: Total of 4 processors activated (54.14 BogoMIPS). <6>[ 0.026245] VFP support v0.3: implementor 51 architecture 64 part 6f variant 1 rev 0 <6>[ 0.027191] dummy: <6>[ 0.027557] NET: Registered protocol family 16 <3>[ 0.030700] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver <3>[ 0.031036] MSM_DCVS: msm_dcvs_early_init: Unable to initialize DCVS err=4 <0>[ 0.035003] sec_debug_init: enable=0 <0>[ 0.035034] sec_debug_init: restart_reason : 0xfa00a65c <6>[ 0.035034] meminfo_init: smem ram ptable found: ver: 0 len: 6 <6>[ 0.035064] Found 2 memory banks grouped into 16 memory regions <6>[ 0.035247] gpiochip_add: registered GPIOs 0 to 151 on device: msmgpio <6>[ 0.036224] socinfo_init: v7, id=153, ver=2.0, raw_id=1819, raw_ver=1819, hw_plat=8, hw_plat_ver=65536 <6>[ 0.036224] accessory_chip=0, hw_plat_subtype=1, pmic_model=25, pmic_die_revision=1 <6>[ 0.036254] msm_rpm_init: RPM firmware 3.0.16842920 <3>[ 0.054656] msm_rpm_get_status(): Status id 433 not defined for target <3>[ 0.054656] msm_rpm_get_status(): Status id 433 not defined for target <3>[ 0.054656] msm_rpm_get_status(): Status id 433 not defined for target <3>[ 0.054687] msm_rpm_get_status(): Status id 433 not defined for target <3>[ 0.054687] msm_rpm_get_status(): Status id 433 not defined for target <3>[ 0.054687] msm_rpm_get_status(): Status id 433 not defined for target <3>[ 0.054718] msm_rpm_get_status(): Status id 433 not defined for target <3>[ 0.054718] msm_rpm_get_status(): Status id 433 not defined for target <6>[ 0.071899] cypress gpio init in apq8064_init_gpiomux <6>[ 0.071899] apq8064_init_gpiomux: config touch_irq config. <6>[ 0.072814] gpio_vreg_probe: id=203, name=ext_mpp8, gpio=203, gpio_label=ext_mpp8_en <6>[ 0.073150] gpio_vreg_probe: id=77, name=ext_3p3v, gpio=77, gpio_label=ext_3p3v_en <6>[ 0.073364] pm8921_probe: PMIC revision 1: F1 <6>[ 0.073394] pm8921_probe: PMIC revision 2: 0C <6>[ 0.073394] pm8921_probe: PMIC version: PM8917 rev 1.0 <6>[ 0.073425] pm8921_probe: PMIC Restart Reason: Triggered from SMPL (sudden momentary power loss) <6>[ 0.074462] gpiochip_add: registered GPIOs 152 to 189 on device: pm-gpio <6>[ 0.074890] pm_gpio_probe: OK: base=152, ngpio=38 <6>[ 0.075073] gpiochip_add: registered GPIOs 196 to 205 on device: pm8xxx-mpp <6>[ 0.075134] pm8xxx_mpp_probe: OK: base=196, ngpio=10 <6>[ 0.080352] pm8821_probe: PMIC revision 1: PM8821 rev F3 <6>[ 0.080383] pm8821_probe: PMIC revision 2: PM8821 rev 0B <6>[ 0.080383] pm8821_probe: PMIC version: PM8821 ver 2.1 <6>[ 0.080902] gpiochip_add: registered GPIOs 208 to 211 on device: pm8xxx-mpp <6>[ 0.080932] pm8xxx_mpp_probe: OK: base=208, ngpio=4 <6>[ 0.081481] gpio_vreg_probe: id=174, name=ext_ts_sw, gpio=174, gpio_label=ext_ts_sw_en <6>[ 0.082641] saw_probe: id=0, name=8921_s5 <6>[ 0.082916] saw_probe: id=1, name=8921_s6 <6>[ 0.083221] saw_probe: id=2, name=8821_s0 <6>[ 0.083526] saw_probe: id=3, name=8821_s1 <6>[ 0.090789] persistent_ram: error in header, 4 <6>[ 0.090789] persistent_ram: found existing buffer, size 29712, start 29712 <6>[ 0.189727] console [ram-1] enabled <6>[ 0.190795] apq8064_init_mmc: SDC4 is for Externel SD in system_rev 11 <7>[ 0.190979] [slimbus] starting init set up : 11 0 <6>[ 0.191925] samsung sys class init. <6>[ 0.191986] samsung sys class end. <7>[ 0.192199] [TSP] System revision, LPM mode : 11 0 <7>[ 0.192199] [TSP]START S5000_tsp_input_init <6>[ 0.192199] S5000_tsp_input_init: synaptics : el_type : 0, touch_type = 8[normal mode] <7>[ 0.192230] [TSP]END S5000_tsp_input_init <6>[ 0.193084] [lcd] apq8064_init_fb <7>[ 0.194793] [JC] apq8064_init_cam: In <7>[ 0.195068] [S5K6B2YX] apq8064_init_cam: GPIO_CAM_VT_EN: 0 <6>[ 0.196960] [SSP] clear_ssp_gpio done <6>[ 0.196960] [SSP]sensor_power_on_vdd <3>[ 0.198455] sensor_power_on_vdd: done <6>[ 0.198577] [SSP]initialize_ssp_gpio <6>[ 0.198913] bcm2079x_sw_i2c_config is called <6>[ 0.198944] [NFC] bcm2079x_init done <6>[ 0.249267] =[ES325]=es325_start_api===== <6>[ 0.249267] brcm_wlan_init: start <6>[ 0.249359] brcm_init_wlan_mem: WIFI MEM Allocated <6>[ 0.249511] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. <6>[ 0.249511] hw-breakpoint: maximum watchpoint size is 8 bytes. <4>[ 0.250427] ------------[ cut here ]------------ <4>[ 0.250457] WARNING: at arch/arm/mach-msm/subsystem_restart.c:684 subsys_restart_init+0xec/0x120() <4>[ 0.250457] Modules linked in: <4>[ 0.250518] [
When I launch the ROM, MultiROM launch TWRP instead of the ROM