Terrapin-Rocket-Team / Payload

Code and PCBS for the payload team
MIT License
0 stars 2 forks source link

MULE Flight updates #1

Open nate-roy opened 2 months ago

nate-roy commented 2 months ago
nate-roy commented 2 months ago

Cut wind tunnel plates to size for water jetting

abharm commented 3 weeks ago

10/30 I added holes to the side panels of the MULE and minimized the bottom ballast, reducing total weight from 9.1 lbs to 6.7 lbs. Also did FEA for one of the side panels for a static force of 300 lbs, resulting in around 12 SF, meaning more weight can be reduced.

image

image

abharm commented 2 weeks ago

11/6

Cut larger holes in sides for weight Added crossbar to hold prop arm in took out hidden side panels increased height to 40cm made ballast block into quarter inch plate Made 3 screws on each side of ballast plate Cut hole in top plate (?) Redid FEA - Min SF of 3.2 now

Current Weight - 5.5lbs

image

image

abharm commented 1 week ago

11/13 Cut out some more holds for weight reduction currently at ~5.3lbs

image

abharm commented 6 days ago

11/20

lowered ebay, larger weight saving holes

image