Open vijayank88 opened 3 days ago
This looks like a recent bug. Please try with the head.
I build again by pulling latest code, but stops at same error
Another observation is, without docker or local installation mode the detail route log as follows:
[INFO DRT-0267] cpu time = 00:00:34, elapsed time = 00:00:12, memory = 886.93 (MB), peak = 886.93 (MB)
[INFO DRT-0180] Post processing.
[WARNING GRT-0246] No diode with LEF class CORE ANTENNACELL found.
[INFO ANT-0002] Found 0 net violations.
[INFO ANT-0001] Found 0 pin violations.
[INFO ANT-0002] Found 0 net violations.
[INFO ANT-0001] Found 0 pin violations.
While running same design inside docker it got error
[INFO DRT-0267] cpu time = 00:00:29, elapsed time = 00:00:10, memory = 839.20 (MB), peak = 839.20 (MB)
[INFO DRT-0180] Post processing.
[WARNING GRT-0246] No diode with LEF class CORE ANTENNACELL found.
Error: detail_route.tcl, 63 expected boolean value but got ""
Command exited with non-zero status 1
@vvbandeira any feedback?
I have the same issue, I followed the instructions in https://openroad-flow-scripts.readthedocs.io/en/latest/user/BuildWithDocker.html
My current workaround is
export SKIP_ANTENNA_REPAIR_POST_DRT=1
make
However, I have new errors.
[INFO DRT-0180] Post processing.
[INFO ANT-0002] Found 0 net violations.
[INFO ANT-0001] Found 0 pin violations.
Error: detail_route.tcl, 73 invalid command name "design_is_routed"
Command exited with non-zero status 1
Elapsed time: 0:06.30[h:]min:sec. CPU time: user 25.58 sys 0.38 (411%). Peak memory: 844644KB.
make[1]: *** [Makefile:785: do-5_2_route] Error 1
make: *** [Makefile:783: results/nangate45/gcd/base/5_2_route.odb] Error 2
This design_is_routed only appears once in the .tcl file.
After commenting this section, I could the GUI part, which also failed in pre-built binaries.
For the envvar issue, add set ::env(SKIP_ANTENNA_REPAIR_POST_DRT) 1
to the beginning of detail_route.tcl
(in my case, line 22) should be an easy workaround.
Subject
[Stage]: Detail Router.
Describe the bug
Installed latest ORFS with docker based. While running with
make
command with default design, it fails with below errorExpected Behavior
successfully complete
make
command inside dockerEnvironment
To Reproduce
Install ORFS with docker based installation. Inside docker run
make
Relevant log output
No response
Screenshots
No response
Additional Context
No response