Can't connect to web interface

[hinchy34]

I have the Yi 1080p Home Camera, and using a 64gb microsd (not sure if it's too big).

It's formated to FAT32 (not exFAT), the allocation unit size was 4kb.

I grabbed yi_hack_v4_v0.2.0__yi_dome_1080p.zip and I confirmed the two files are in the root directory of my microSD card. I did not include the folder they came in yi_home_1080p.

The camera is off, put in the card and power it up. It does the yellow light then blue comes up. I am able to use the mobile app to connect to the device, I can also check the network settings to find the local ip of 192.168.0.24 however I am not able to connect to the web interface at this step.

I am able to ping 192.168.0.24 sucessfully. So I am not sure where I went wrong?

Edit: So I am able to see the camera IP and MAC address on my router under the connected client's page. So this leads me to believe I don't have it installed right, or something isn't compatible.

Edit Two: Ok so I see on the Discord FAQ channel it says the SD card must be maximum 32gb or less. But the github page says preferably 16gb or less. My 64gb card is likely the issue then.

Edit Three: So I just bought a 16GB card and it still doesn't work.. Not sure what I am missing.

Edit 4: So when I boot it up, the sequence is solid yellow for 10-15 seconds then I hear some sort of clicking noise then it flashes blue and goes solid blue. Which isn't the sequence described in the instructions.

[bepece1]

I have same problem with firmware 4.60.0.0A

119

[bepece1]

@hinchy34 I think the problem is the filename... Review my comment https://github.com/TheCrypt0/yi-hack-v4/issues/119#issuecomment-522973343

[shxdow]

@bepece1, @hinchy34 did changing the filenames solve your issue ? Also, can you guys run a port scan on the camera to at least make sure port 80 is open ?

[feiticeir0]

I've manage to connect to the camera using 8080 port , not 80