search

TheCrypt0 / yi-hack-v4

New Custom Firmware for Xiaomi Cameras based on Hi3518e Chipset. It features RTSP, SSH, FTP and more!
GNU General Public License v3.0
1.55k stars 218 forks source link

Can't flash - nothing happens #179

Open sekkr1 opened 4 years ago

sekkr1 commented 4 years ago

Hello,

I have a Yi IoT 1080p outdoor camera (model XY-R9520-V3) and nothing happens when I turn it on with the SD card in (16gb capacity fat32).

The camera would just turn on regularly doing its sounds and no LED would blink, just the regular red LED lighting up and letting it sit for a couple minutes and trying to access the web panel shows that it really didn't flash.

I tried flashing before and after connecting to the Yi IoT app to no avail.

Is it really just opening the side panel, inserting an SD card with 2 files in and connecting the camera to power?

Maybe it doesn't work because it's an "IoT" camera?

I'd appreciate it if someone could help me, thanks.

maartenvang commented 4 years ago

I have the exact same issue as you.

I tried formatting the card with my macbook first, but with ubuntu and gparted didn't work either. I even tried a smaller partition. All that happens is the regular startup flow (solid orange light, then a shutter click, then the light goes out and I can access the camera as usual).

I suspect the SD card itself is the culprit, I'll have to try another one but I don't have one at hand.

EDIT: I found out that my device is not supported by this firmware. Flashing the MStar firmware (https://github.com/roleoroleo/yi-hack-MStar#supported-cameras) worked fine, as my device serial started with BFUS.

jonydebu commented 4 years ago

Same issue here .

ebolisa commented 4 years ago

Same issue here too. Yi Home 1080p (9FUS)

UPDATE: Making progress thanks to @stixpunk. http://myip:8080 works so does SSH but cannot see any videos with http://myip

Peboli commented 4 years ago

Same issue with a Yi Home 1080p (original firmware 4.5.0.0C_20190080934)

stixpunk commented 4 years ago

Same here. I sucessfuly flash Outdoor Camera 1080p, but nothing happened on 1080p Home. Used same sd card which work on outdoor, files and names are correct. After put card in and turn on camera, it runs normally and start recording on sd card. Product name: YI 1080p Home Camera Model: YYS.2016 Original fw: 4.5.0.0C_201910080934 (on previous version nothing happened too)

ndonna04 commented 4 years ago

Same here. Yi Home 1080p (original firmware 4.5.0.0C_20190080934).

stixpunk commented 4 years ago

Ok, I'm found, that some newer Yi Home 1080p start using another chip. If crypt0 version don't start flashing, try use this - https://github.com/roleoroleo/yi-hack-MStar

supermanscottbristol commented 4 years ago

Same here. Yi Home 1080p (original firmware 4.5.0.0C_20190080934).

benoegen commented 4 years ago

Anyone able to compile something similar for the Yi IOT outdoor camera (model XY-R9520-V3)? Or does this already exist somewhere?

JhonnyMarr commented 4 years ago

I´m also interested in yi_Hack_v4 for the Yi IOT outdoor camera (model XY-R9520-V3). Very similar to yi outdoor https://es.aliexpress.com/item/4000120325499.html?spm=a2g0s.9042311.0.0.274263c06jCm4M I´ve got one of them. I´ve seen that the telnet port is open (user: root no passwd) If any coder needs something tell me what to do. It has the option to stream to an Alexa Echo Show; Would it be possible to capture that stream with VLC or similar? It has a Mobile and PC app http://www.yunyiiot.com/html/download_en.html Regards

Abuelika commented 4 years ago

Is the port open? It tested on port 23 and is closed.

JhonnyMarr commented 4 years ago

In my camera the port is open

Abuelika commented 4 years ago

Hi, I have been looking here, (https://github.com/rage2dev/YiOutdoor) And I've got telnet access on the camera on port 9999

/backup/script # cat /proc/cpuinfo system type : RLX Linux for IPCam Platform machine : Unknown processor : 0 cpu model : Taroko V0.2 FPU V0.1 BogoMIPS : 497.66 tlb_entries : 64 mips16 implemented : yes

Tnx

JhonnyMarr commented 4 years ago

My firmware version is Firmware version 7.1.00 11A201905311440 and it has port 23 open. I´m very interested in activate rtsp. If anyone can help woud be very appreciated ~ # cat /proc/cpuinfo
system type : RLX Linux for IPCam Platform machine : Unknown
processor : 0
cpu model : Taroko V0.2 FPU V0.1 BogoMIPS : 497.66
tlb_entries : 64
mips16 implemented : yes

There is another thread about it here https://github.com/TheCrypt0/yi-hack-v4/issues/226

ilmisu commented 4 years ago

Hi all, same issue on my Yi Home camera 1080p BFUS serial...

Tried with 4 or 5 different SDs of different capacities, but every time it did its boot with never check out for the microsd. Wait for an help... 😭

llellouche commented 4 years ago

Yi 1080p Home 4FUS Firmware 4.2.0 doestn't works too.

I juts bought this camera it's new model 3 of Yi 1080p Home

stefankoehne commented 3 years ago

Hi all, same issue on my Yi Home camera 1080p BFUS serial...

Tried with 4 or 5 different SDs of different capacities, but every time it did its boot with never check out for the microsd. Wait for an help... 😭

Try this. https://github.com/roleoroleo/yi-hack-Allwinner-v2 This worked for me for YYS2016 - BFUS - Firmware 9.0.19*

git-voopeel commented 3 years ago

Hi all, I cant still upgrade my Yi Home 1080p BFUS serial number. I search for Allwinner v2 but ... there is no binary files like in other repositories. Shall I copy all file tree? Thank you for help.

Abuelika commented 3 years ago

Hi, I have tried the solution of this link and it has worked for me.

https://github.com/cjj25/Yi-RTS3903N-RTSPServer

I have connected the camera by rtsp with zoneminder without problems.

YI IOT OUTDOOR CAMERA XY-R9520-V3