Automatic alarm disable if running on USB power

[GoogleCodeExporter]

What new feature/ability do you want?
This would work along with s-mack's add-on board.  I have figured out I can 
power the radio through the USB port while using the simulator.  Unfortunately 
the battery alarm goes the entire time unless alarms are disabled.

What is the expected output?
If the battery voltage was sensed as 4.7-5.1 V the battery alarm would not 
sound.  My radio is reporting 4.8V while plugged in to USB.  The range should 
cover the voltage you would get while plugged in.

What version of the product are you using?
r264?

Please provide any additional information below.
Powering the radio from USB while using the simulator means you would not have 
to recharge you batteries.  And possibly you can play with the sim longer.

Original issue reported on code.google.com by gohs...@gmail.com on 16 Nov 2010 at 5:37

[GoogleCodeExporter]

This issue is fixed as of v267

Original comment by gohs...@gmail.com on 19 Nov 2010 at 5:09

[GoogleCodeExporter]

Yes it is.
I haven't marked it as such because I want to remember to write it up.

Original comment by erezra...@gmail.com on 19 Nov 2010 at 6:44

[GoogleCodeExporter]

Original comment by erezra...@gmail.com on 28 Nov 2010 at 10:25

• Changed state: Fixed