Open Ser1ous1 opened 8 months ago
Hi there.
For screen issues like this, it means that you have a screen that doesn't support the unified 60hz patch for v1 and v2 panels. No problem, you can flash this boot image using fastboot to restore the original LCD timings. (works on any 353 device)
Ensure you have the tools and drivers installed:
ADB and fastboot tools: https://github.com/K3V1991/ADB-and-FastbootPlusPlus (make sure both boxes here are checked during the install):
Fastboot drivers: https://drive.google.com/file/d/1PhTmabIz5niQ9PcpPCgFBxx3TeBk6idS/view?usp=drivesdk
Then just download the attached file and extract this file: magisk_patched-26400_1wNRQ.zip
Reboot your 353 into recovery mode by holding down power, choose restart, then choose recovery. Connect your USB cable.
Once in recovery, go to enter fastboot option.
Use the following command on your pc: fastboot flash boot magisk_patched-26400_1wNRQ.img
Then reboot.
Is there a version of GammaOS that already has this included? I know it's a lot to ask, but I've tried 3 different cables and 2 different computers, and I cannot get adb/fastboot to work. I would really like to use GammaOS.
Hi there.
For screen issues like this, it means that you have a screen that doesn't support the unified 60hz patch for v1 and v2 panels. No problem, you can flash this boot image using fastboot to restore the original LCD timings. (works on any 353 device)
Ensure you have the tools and drivers installed:
- ADB and fastboot tools: https://github.com/K3V1991/ADB-and-FastbootPlusPlus (make sure both boxes here are checked during the install):
- Fastboot drivers: https://drive.google.com/file/d/1PhTmabIz5niQ9PcpPCgFBxx3TeBk6idS/view?usp=drivesdk
Then just download the attached file and extract this file: magisk_patched-26400_1wNRQ.zip
Reboot your 353 into recovery mode by holding down power, choose restart, then choose recovery. Connect your USB cable.
Once in recovery, go to enter fastboot option.
Use the following command on your pc: fastboot flash boot magisk_patched-26400_1wNRQ.img
Then reboot.
The magisk pacthed failed after flash
Hello,
fresh install on my RG353P device. Got a display issue, the top is "ghost mirroring" on the bottom part of the display, like its an resolution problem. - is there a fix?
Thanks