search

TheRoam / DFRobot-UNIHIKER-case

Oper-source DFRobot themed cases for UNIHIKER dev board
0 stars 0 forks source link

Separate stl files #3

Open Don-FL opened 7 months ago

Don-FL commented 7 months ago

Is there a way to get each individual case piece in a separate stl file? I'd prefer not to try to print all the case peices at once, especially they can't be individually moved around or positioned.

TheRoam commented 7 months ago

Hi, thanks for your issue, you're absolutely right. I actually printed them separately, except for the antennas and feet which went all in one.

You can open the Blender file and export them to your like, but I've uploaded the separate .stl files to a new folder in case that's more handy: https://github.com/TheRoam/DFRobot-UNIHIKER-case/tree/main/blender/Unihiker_DFRcase_v1

Any problems let me know, and check this issue for known problems in the current model version: https://github.com/TheRoam/DFRobot-UNIHIKER-case/issues/1

Don-FL commented 7 months ago

Thank you!

That was going to be my next step, see if I can open them in Fusion 360 (my go-to drawing design tool) and see what I could do with them there.

Thanks for the fast response!

Don

From: The Roaming Workshop @.> Sent: Thursday, November 30, 2023 11:54 AM To: TheRoam/DFRobot-UNIHIKER-case @.> Cc: Don-FL @.>; Author @.> Subject: Re: [TheRoam/DFRobot-UNIHIKER-case] Separate stl files (Issue #3)

Hi, thanks for your issue, you're absolutely right. I actually printed them separately, except for the antennas and feet which went all in one.

You can open the Blender file and export them to your like, but I've uploaded the separate .stl files to a new folder in case that's more handy: https://github.com/TheRoam/DFRobot-UNIHIKER-case/tree/main/blender/Unihiker_DFRcase_v1

Any problems let me know, and check this issue for known problems in the current model version:

1 https://github.com/TheRoam/DFRobot-UNIHIKER-case/issues/1

— Reply to this email directly, view it on GitHub https://github.com/TheRoam/DFRobot-UNIHIKER-case/issues/3#issuecomment-1834159675 , or unsubscribe https://github.com/notifications/unsubscribe-auth/AVB2L7OI26TBWVMN3FSTNL3YHC22ZAVCNFSM6AAAAABABJYNKCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQMZUGE2TSNRXGU . You are receiving this because you authored the thread. https://github.com/notifications/beacon/AVB2L7NPKS5KBSPCR224P3LYHC22ZA5CNFSM6AAAAABABJYNKCWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTTNKMHDW.gif Message ID: @. @.> >