Reset pin documentation

TheThingsArchive / packet_forwarder

Packet forwarder for Linux based gateways

MIT License

84 stars 92 forks source link

Reset pin documentation #47

Closed jpmeijers closed 6 years ago

jpmeijers commented 7 years ago

This is a feature request for the packet forwarder documentation.

Make a table of common reset pin values for the Raspberry Pi setup.

egourlao commented 7 years ago

Apart from this, it will also probably necessary to document how to use the gpio pins without being root: https://github.com/stianeikeland/go-rpio#using-without-root

tomazursic commented 7 years ago

For user with sudo permissions was enough to add user to group gpio to make the reset-pin. It works without using create_gpio_user_permissions.py

The "reset-pin" for IMST ic880a is "25" also with IMST iC880a LoRaWAN backplane.

xenek commented 7 years ago

Per https://github.com/jpmeijers/ttn-resin-gateway-rpi I can confirm that reset pin 26 is correct for the Rising HF Raspberry Pi Shield using v2.0.2 of the TTN new packet forwarder. Must be specified. x