search

TheZeroBeast / TZB-MMU2S-Firmware

Firmware for Original Prusa MMU2 by Robert McKenzie
140 stars 22 forks source link

Support for Bondtech Mosquito #150

Closed rmilyard closed 5 years ago

rmilyard commented 5 years ago

I have a MK3S+MMU2S with Bondtech Mosquito extruder. I have been having a lot of issues getting this all working together. I was wondering if have tested this combo yet?

TheZeroBeast commented 5 years ago

I only have the e3d v6 hotend combo sorry.

What issues are you having getting this going? I.E. what changes do you normally do to make it work on stock FW?

rmilyard commented 5 years ago

Added Thermistor table for Slice Engineering.

https://github.com/BondtechAB/Bondtech_Prusa_i3/tree/master/Firmware/3.8.0#mk3s-changesMK3s Changes

From: Robert McKenzie notifications@github.com Sent: Tuesday, September 24, 2019 2:57 AM To: TheZeroBeast/TZB-MMU2S-Firmware TZB-MMU2S-Firmware@noreply.github.com Cc: rmilyard rmilyard@hotmail.com; Author author@noreply.github.com Subject: Re: [TheZeroBeast/TZB-MMU2S-Firmware] Support for Bondtech Mosquito (#150)

I only have the e3d v6 hotend combo sorry.

What issues are you having getting this going? I.E. what changes do you normally do to make it work on stock FW?

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/TheZeroBeast/TZB-MMU2S-Firmware/issues/150?email_source=notifications&email_token=ACUT57XJLSD2HO5ZNOIHM7LQLHQA7A5CNFSM4IZX7SNKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD7NZW6Y#issuecomment-534485883, or mute the threadhttps://github.com/notifications/unsubscribe-auth/ACUT57QMQZJRVHU2GNPPKQDQLHQA7ANCNFSM4IZX7SNA.

rmilyard commented 5 years ago

My filament tips are stringy. Also little to big. They are getting jammed and not loading so have load fail until I cut the tips.

TheZeroBeast commented 5 years ago

Thanks for the list of changes.

With the large tips and stringing, have you double checked you have the correct heatbreak and smaller inner diameter extruder PTFE? They are not optional.

I did a test a long time ago with a stock brand new e3d v6 heatbreak and not a single mmu2 load would work. I can't remember the tip diameter measurements but it was a substantial difference in tip size.

gizzburn commented 5 years ago

Is the Bondtech BMG on the list to do next Robert?.

TheZeroBeast commented 5 years ago

I'll compile and add the mosquito hex to my final release tonight.

rmilyard commented 5 years ago

I would be interested also in new Bondtech Mosquito with Slice thermistor firmware.

TheZeroBeast commented 5 years ago

Hi @rmilyard, releases page now has a build with SE HT Thermistor tables and bondtech changes. Let me know if it works

TheZeroBeast commented 5 years ago

Hi @rmilyard, any chance you've loaded the release for Mosquito to confirm it works?

rmilyard commented 5 years ago

No. I am in CA with family at Disneyland.

Sent from my iPhone

On Oct 9, 2019, at 5:00 AM, Robert McKenzie notifications@github.com wrote:



Hi @rmilyardhttps://github.com/rmilyard, any chance you've loaded the release for Mosquito to confirm it works?

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHubhttps://github.com/TheZeroBeast/TZB-MMU2S-Firmware/issues/150?email_source=notifications&email_token=ACUT57TUYD5HH3JOVMKMK33QNXBVZA5CNFSM4IZX7SNKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEAXUQNI#issuecomment-539969589, or mute the threadhttps://github.com/notifications/unsubscribe-auth/ACUT57U2GN5O6GFUAOLFI53QNXBVZANCNFSM4IZX7SNA.

TheZeroBeast commented 5 years ago

Ah sweet! Enjoy, let me know when you return.

TheZeroBeast commented 5 years ago

@rmilyard, how was Disneyland, any update on this thread?

TheZeroBeast commented 5 years ago

Stale issue thread. It you have any issues please advise so we can re-open and resolve.