search

ThexXTURBOXx / clion-embedded-esp32

OpenOCD + ESP32 support for CLion
https://plugins.jetbrains.com/plugin/18760-openocd--esp32-support-for-embedded-development
Other
14 stars 5 forks source link

Remote replied unexpectedly to 'vMustReplyEmpty' #5

Open xiaohuihere opened 1 year ago

xiaohuihere commented 1 year ago

board：esp32-wrover-kit-3.3v development environment：win10 + clion 2022.2.4 During the secondary development of the esp32 project, I downloaded this plugin and made the following settings 72a649e50259f061873a7ef54257d4d 26dd3157747fab50175de0887339b60

However, when I debug, I find that it cannot start successfully. Its openocd console output is as follows:

C:\Users\22380\.espressif\tools\openocd-esp32\v0.11.0-esp32-20221026\openocd-esp32\bin\openocd.exe -c "tcl_port disabled" -s C:\Users\22380\.espressif\tools\openocd-esp32\v0.11.0-esp32-20221026\openocd-esp32\share\openocd\scripts -f interface/ftdi/esp32_devkitj_v1.cfg -f C:/Users/22380/.espressif/tools/openocd-esp32/v0.11.0-esp32-20221026/openocd-esp32/share/openocd/scripts/board/esp32-wrover-kit-3.3v.cfg -c "program_esp32 C:/Users/22380/Documents/DebugCase/XMB-DebugCase/cmake-build-debug-mingw/wifi_station.bin 0x10000" -c "init; reset halt"
Open On-Chip Debugger v0.11.0-esp32-20221026 (2022-10-26-14:48)
Licensed under GNU GPL v2
For bug reports, read
        http://openocd.org/doc/doxygen/bugs.html
adapter speed: 20000 kHz

Warn : Interface already configured, ignoring
WARNING: Function (program_esp32) is deprecated, and may be removed in a future
release.
         Use (program_esp) instead.
Error: libusb_open() failed with LIBUSB_ERROR_NOT_SUPPORTED
Info : ftdi: if you experience problems at higher adapter clocks, try the comman
d "ftdi tdo_sample_edge falling"
Info : clock speed 20000 kHz
Info : JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica)
, part: 0x2003, ver: 0x1)
Info : JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica)
, part: 0x2003, ver: 0x1)
Info : starting gdb server for esp32.cpu0 on 3333
Info : Listening on port 3333 for gdb connections
Info : [esp32.cpu0] Debug controller was reset.
Info : [esp32.cpu0] Core was reset.
Info : [esp32.cpu1] Debug controller was reset.
Info : [esp32.cpu1] Core was reset.
Info : JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica)
, part: 0x2003, ver: 0x1)
Info : JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica)
, part: 0x2003, ver: 0x1)
Info : [esp32.cpu0] requesting target halt and executing a soft reset
Info : [esp32.cpu0] Target halted, PC=0x401629D0, debug_reason=00000000
Info : [esp32.cpu0] Reset cause (1) - (Power on reset)
Info : Set GDB target to 'esp32.cpu0'
Info : [esp32.cpu1] Target halted, PC=0x401629D0, debug_reason=00000000
Info : [esp32.cpu1] Reset cause (14) - (CPU1 reset by CPU0)
Info : [esp32.cpu0] Debug controller was reset.
Info : [esp32.cpu0] Core was reset.
Info : [esp32.cpu0] Target halted, PC=0x500000CF, debug_reason=00000000
Info : [esp32.cpu0] Reset cause (3) - (Software core reset)
Info : [esp32.cpu1] requesting target halt and executing a soft reset
Info : [esp32.cpu0] Core was reset.
Info : [esp32.cpu0] Target halted, PC=0x40000400, debug_reason=00000000
Info : [esp32.cpu1] Debug controller was reset.
Info : [esp32.cpu1] Core was reset.
Info : [esp32.cpu1] Target halted, PC=0x40000400, debug_reason=00000000
Info : [esp32.cpu1] Reset cause (14) - (CPU1 reset by CPU0)
Info : [esp32.cpu0] Reset cause (3) - (Software core reset)
Info : [esp32.cpu0] Target halted, PC=0x40092612, debug_reason=00000001
Info : Flash mapping 0: 0x10020 -> 0x3f400020, 90 KB
Info : Flash mapping 1: 0x30020 -> 0x400d0020, 615 KB
Info : [esp32.cpu0] Target halted, PC=0x40092612, debug_reason=00000001
Info : Auto-detected flash bank 'esp32.cpu0.flash' size 4096 KB
Info : Using flash bank 'esp32.cpu0.flash' size 4096 KB
Info : [esp32.cpu0] Target halted, PC=0x40092612, debug_reason=00000001
Info : Flash mapping 0: 0x10020 -> 0x3f400020, 90 KB
Info : Flash mapping 1: 0x30020 -> 0x400d0020, 615 KB
Info : [esp32.cpu0] Target halted, PC=0x40092612, debug_reason=00000001
Info : Auto-detected flash bank 'esp32.cpu1.flash' size 4096 KB
Info : Using flash bank 'esp32.cpu1.flash' size 4096 KB
** Programming Started **
Info : [esp32.cpu0] Target halted, PC=0x40092612, debug_reason=00000001
Info : [esp32.cpu0] Target halted, PC=0x40092612, debug_reason=00000001
Info : PROF: Erased 860160 bytes in 3788.96 ms
Info : PROF: Data transferred in 3093.83 ms @ 271.508 KB/s
Info : [esp32.cpu0] Target halted, PC=0x40092612, debug_reason=00000001
Info : PROF: Wrote 860160 bytes in 3394.89 ms (data transfer time included)
** Programming Finished in 7672 ms **
Info : JTAG tap: esp32.cpu0 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica)
, part: 0x2003, ver: 0x1)
Info : JTAG tap: esp32.cpu1 tap/device found: 0x120034e5 (mfg: 0x272 (Tensilica)
, part: 0x2003, ver: 0x1)
Info : [esp32.cpu0] requesting target halt and executing a soft reset
Info : [esp32.cpu0] Debug controller was reset.
Info : [esp32.cpu0] Core was reset.
Info : [esp32.cpu0] Target halted, PC=0x500000CF, debug_reason=00000000
Info : [esp32.cpu0] Reset cause (3) - (Software core reset)
Info : [esp32.cpu1] requesting target halt and executing a soft reset
Info : [esp32.cpu0] Core was reset.
Info : [esp32.cpu0] Target halted, PC=0x40000400, debug_reason=00000000
Info : [esp32.cpu1] Debug controller was reset.
Info : [esp32.cpu1] Core was reset.
Info : [esp32.cpu1] Target halted, PC=0x40000400, debug_reason=00000000
Info : [esp32.cpu1] Reset cause (14) - (CPU1 reset by CPU0)
Info : [esp32.cpu0] Reset cause (3) - (Software core reset)
Info : tcl server disabled
Info : Listening on port 4444 for telnet connections
Info : accepting 'gdb' connection on tcp/3333
Warn : No symbols for FreeRTOS!
Info : [esp32.cpu0] Target halted, PC=0x40092612, debug_reason=00000001
Info : Flash mapping 0: 0x10020 -> 0x3f400020, 90 KB
Info : Flash mapping 1: 0x30020 -> 0x400d0020, 615 KB
Info : Using flash bank 'esp32.cpu0.irom' size 616 KB
Info : [esp32.cpu0] Target halted, PC=0x40092612, debug_reason=00000001
Info : Flash mapping 0: 0x10020 -> 0x3f400020, 90 KB
Info : Flash mapping 1: 0x30020 -> 0x400d0020, 615 KB
Info : Using flash bank 'esp32.cpu0.drom' size 92 KB
Info : New GDB Connection: 1, Target esp32.cpu0, state: halted
Error: GDB missing ack(2) - assumed good
Info : dropped 'gdb' connection

Its debug console output is as follows:

com.jetbrains.cidr.execution.debugger.backend.gdb.GDBDriver$GDBCommandException: Remote replied unexpectedly to 'vMustReplyEmpty': PacketSize=4000;qXfer:memory-map:read+;qXfer:features:read+;qXfer:threads:read+;QStartNoAckMode+;vContSupported+
debugger disconnected
ThexXTURBOXx commented 1 year ago

Sadly, I currently don't have the required hardware to test this. As soon as I am able to test this, I will let you know