search

Thinkerfans / copter-gcs

Automatically exported from code.google.com/p/copter-gcs
0 stars 0 forks source link

No Data on Asus TF700T (Android 4.0.3): BlueSmirfGold, 3DR, APM2, Arducopter 2.6 (Mav 1.0) #26

Open GoogleCodeExporter opened 8 years ago

GoogleCodeExporter commented 8 years ago 
I'm still in mailcontact, but perhaps someone has the same problem:

I'm bought on Android Store the app. After mailing with the developer i 
uninstall the app and install it directly via link (version 9 with mavlink 1.0).

I'm using the new Asus TF700T with Android 4.0.03 and connect via BlueSmirfGold 
to 3DR air-module. On APM2 is the arducopter 2.6 installed with the same 3DR 
ait-module. Both 3DR and BT-module are set to 567k baud. The 3DR is like this 
picture configured and connected to APM2: 
http://code.google.com/p/arducopter/wiki/3DRadio#Configuring_using_the_Mission_P
lanner

Now, if I connect my 3DR-air-module for ground via FTDI-USB cable to my desktop 
pc, I can select the USB-Cable-Com-Port with 57k in mission planner and can see 
and set all data. It works fine.

Then I connect the 3DR-air-module for ground like the circuit diagram (from 
gcs-copter) with BlueSmirfGold and an IC to create the exactly 3,3 power 
supply. I've paired the FireFly.

Then I powered the 3DR and BT up. On 3DR the green led lights solid and the red 
led blinks. The BT module lights red. When I start the app, I selected MAVLink. 
The text "Protocol selected" shown, the green led by BT lights and the "Quad+ 
GCS Link" goes to task. If I press "Status", I don't get any data. In between 
times (SOMETIMES) the green and red led on 3DR blinks. I think, I've lost the 
connection. By click on "Readout" and then on "back" the program was closed by 
himself or android. 

Otherwise when the green led lights solid and the red led blinks for data, the 
app don't show me any data...

The connection doesn't lost, when I use the 3DR at FTDI-USB cable this is not 
happend. If I repower the 3DR module the green led is rapidly green solid and 
the red is flashing.

I no longer know...

Original issue reported on code.google.com by schoppl...@gmail.com on 12 Jul 2012 at 11:31

GoogleCodeExporter commented 8 years ago 
I've got the same problem with a Samsung s3 android 4.0.4.

Original comment by schoppl...@gmail.com on 9 Aug 2012 at 11:56

GoogleCodeExporter commented 8 years ago 
Now I connected the BT module directly to APM (without 3DR). I can connect to 
BT but the program doesn't show any data. This one I tested APM/Arducopter 
2.7.1 with Android 4.0.4 (Samsung S3) and 4.0.3 (Asus Tf700). :(

Original comment by schoppl...@gmail.com on 15 Aug 2012 at 10:59

GoogleCodeExporter commented 8 years ago 
Hi,

After finishing this reply, I will be ordering some new hardware to let me test 
things out on. Hopefully I can get things sorted out fairly quickly. Odds are 
high that there is simply a bug in the software, which I can track down when I 
get the new APM in.

I'll post when I have something.
Bart

Original comment by Orio...@gmail.com on 15 Aug 2012 at 11:24

GoogleCodeExporter commented 8 years ago 
That are good news. ;) I hope, I could help you with my error reports. Best 
regards.

Original comment by schoppl...@gmail.com on 15 Aug 2012 at 11:37

GoogleCodeExporter commented 8 years ago 
I've got a similar problem running on Android 4.1.1 on a Xoom tablet. I'm 
running 115 k baud with the Bluetooth device directly connected to the APM2 
running v2.72 firmware. I can connect to my computer running the mission 
planner via Bluetooth and everything is perfect. When I first start up the 
Android app though, it force closes and I have to restart. Usually, but not 
always, it let's me select the APM's Bluetooth device, at which time I can 
select the protocol, it sees a heartbeat and connects. At this point most 
things work - but I've never been able to get the HUD to work. I'm not sure why 
but for some unknown reason and at random times it will then crash. If I try to 
restart it, it immediately fails. At that point I have to force close the app 
and clear all data and cache before I can restart it again. It  did all of this 
same stuff running on Android ICS before I upgraded to Ver 4.1.1

Original comment by kahlj...@gmail.com on 16 Sep 2012 at 12:52

GoogleCodeExporter commented 8 years ago 
Hardware has arrived, and I bought a tf700t tablet myself.
I'm setting up things, hopefully I can push an update soon.

Original comment by Orio...@gmail.com on 16 Sep 2012 at 1:31

GoogleCodeExporter commented 8 years ago 
wow! you took a very good investment. it's a genious tab. ;)

Original comment by schoppl...@gmail.com on 16 Sep 2012 at 2:03

GoogleCodeExporter commented 8 years ago 
Some Updates, but not usable:

At time i will use Asus TF700 with Android 4.1.1. The copter-fw ist 2.8.1. The 
connection seems to be stable now, but i can't get any data. If I start "read 
outs" and click on "back", the program was closed by error...

Original comment by schoppl...@gmail.com on 26 Oct 2012 at 1:13

GoogleCodeExporter commented 8 years ago 
Also tested on prime tf201 with android 4.1.1.
Bt connects ok but also no data to retrieve.

Original comment by vincent....@gmail.com on 20 Nov 2012 at 6:18

GoogleCodeExporter commented 8 years ago 
I might have to fix this problem, see my clone: 
https://code.google.com/r/xcl0100-copter-gcs/

you can try this apk , it's Working ok on my i9300 4.1
sorry for my bad english

Original comment by xcl0...@gmail.com on 21 Nov 2012 at 6:08

Attachments:

GoogleCodeExporter commented 8 years ago 
thx very much. this apk is also running on Samsung s3 and asus tf700 :-) but i 
Dosen't check it completely. ..

Original comment by schoppl...@gmail.com on 8 Dec 2012 at 12:44

GoogleCodeExporter commented 8 years ago 
Got an ASUS TF700 for Christmas. Any news on this project.
Thanks,
Neal

Original comment by nealob...@gmail.com on 4 Jan 2013 at 5:47

GoogleCodeExporter commented 8 years ago 
Look at comment #10 ;-)

Original comment by schoppl...@gmail.com on 4 Jan 2013 at 10:21