syutran
commented
5 years ago my build.conf ################################################
--- Thinstation Build Config ---
################################################ # #
This is Thinstation s basic setup file. In this file you decide which
hardware, programs and features to be included in the Thinstation
boot image generated by running "./build".
#
You can customize/limit the possibilities in the thinstation.conf
files later.
#
Anything after a "#" is a comment. You activate "things" by removing
the "#" and remove "things" by putting a "#" in front of them.
#
First we define which modules to include. Modules are hardware
drivers. NEVER include more than necessary - the more modules, the
longer boot time.
########################################################
--- Machine Modules to include in boot image ---
########################################################
A machine profile is a set of modules for a specific set of hardware
components like a thinclient with adapters. It does not include any
filesystem modules, those need to be selected individualy. Making a
a machine profile is a two step process. First you will need to make
an allmodules build like "./build --allmodules" with the extensions-x
package included. Once the client machine is booted with that image
you can open and xterm or telnet in and run "hwlister.sh". hwlister.sh
will compile some lists and attempt to post them to the pxe server assigned
to the client. If the pxe server is this workstation and you are hosting
files directly out of this build env, you can then run
"./mkmachine SOME-MODEL" and the files will be put into the machine folder
under that model name. Now all you have to do is add a line to this file
like "machine SOME-MODEL" and you will no longer have to make
allmodules builds. If this is not the pxe server, you will have to
move stuff around on your own, but the most important files are
modules.list and firmware.list.
################################################
--- Modules to include in boot image ---
################################################
Any modules may be added as "module" or "module_pkg".
If defined as a "module", the driver is included in the boot image.
If defined as a "module_pkg", the driver is added from outside the
image, such as from a tftp server. See note below for more details.
#
Normally you should use "module". Only use "module_pkg" if you want
to dynamically load modules.
Note: If you create a module_pkg network driver, and decide to load it
from a tftp server, it won t work. This is because the image
won t have a network driver to get the module_pkg in the first
place.
!Hardware
!!Machine module list
machine m704 # Gigabyte m704 Rover PC
machine WYSE9150se # WYSE 9150se Thin Client
machine NT-A3500 # Foxconn AMD E-350 Barebone
machine NT-535 # Foxconn Intel D525 Barebone
machine Dell-FX170 # Dell FX170 D525 Atom Machine
machine VMWare # A good set of modules for a VmWare Virtual Machine
machine Virtualbox-4.1 # A good set of modules for a Virtualbox Virtual Machine
machine qemu
machine VIA-Epia-CLE266 # VIA Epia/Eden based on the the CLE266 chip. Rather common in thin clients a few years old
machine classic_generic # Big list of modules that you can choose by unremarking them
machine IGEL-M300C # Igel CX700 Via
machine HP-t5135 # HP CX700 Via
machine foxconn-nT-330i # Foxconn nT 330i Barebone
machine foxconn-nT-435 # Foxconn nT 435 Barebone
machine foxconn-nT-535 # Foxconn nT 535 Barebone
machine foxconn-nT-A3800 # Foxconn nT A3800 Barebone
machine foxconn-nT-i2847 # Foxconn nT i2847 Barebone
machine foxconn-nT-iBT18 # Foxconn nT iBT18 Barebone
machine foxconn-nT-n270 # Foxconn nT n270 Barebone
machine Acer-Revo-M1-601 # Acer Revo M1-601
machine Lenovo-T420s # Lenovo T420s Laptop
machine Lenovo-T430s # Lenovo T430s Laptop
!!Wireless Stuff
package wpa_supplicant
package wireless
package wifi-connect
!!!Misc Modules
!!Filesystem Support
Every mounted device needs a filesystem, so choose which ones you need.
module usb-storage
module autofs4 # Automount and autofs support
module isofs # ISO9960 file system support for CDRoms module udf # CDRom UDF file system support module vfat # Fat and VFat file system support
module ntfs # NTFS file system support
module ext2 # Ext2 file system support
module ext4 # Ext4 file system support
module nfs # NFS file system support
module cifs # CIFS support (use either this or smbfs - not both)
#################################################
--- Packages to include in boot image ---
#################################################
A package is a program or utility.
Any packages may be added as "package" or "pkg".
If defined as a "package", the program is included in the boot image.
If defined as a "pkg", the program is added from outside the image.
Normally, you should use "package". Only use "pkg" if you want to
dynamically load programs.
--- Packages to include in boot image
--- Packages below may be "package" or "pkg"
!!Miscellaneous
package overlayfs # This is needed in order for squashfs compression mode to work.
package ts-classic # The classic ts logic for network/netfiles/hostname/mounting/telnetd/telnet/playcd
package automount
package netfiles # Adds only this package instead of the whole ts-classic. netfiles lets you get thinstation.conf.xxx files
# from the TFTP-serverpackage udisks package automount package networkmanager
package udisks-glue
package ntp # Utility to obtain date & time from network
package sound-esd # Enable sound-esd or sound-nasd if you want to be able to control
package sound-nasd # sound on your thin client from another computer or
# your remote session.package alsa
package gnome-media
package gnome-core
package gnome-control-center package volumeicon
package kismet
package gst-plugins-base
package gst-plugins-good
package crystalhd
package libva
package iptables # IP Tables support
package cpufreq
package cpuspeed
package wine # Windows Application Execution Platform
!!X related
--- XOrg 7.7
package xorg7-v4l
package xorg7-vesa #A fallback driver that works with almost everything. Does allow resolution changes package xorg7-vmware package xorg7-qxl package xorg7-ati #ATI video driver for most modern ATI chipsets. Usually requires several firmwares package xorg7-amdgpu package xorg7-nouveau #New opensource nvidia driver
package xorg7_nvidia #Proprietary nvidia driver
package xorg7-openchrome #Via Video Chipsets driver package xorg7-intel #Intel video driver for most modern chipsets except the GMA3500/3600
package xorg7-sis
!!Locale or localization files for keyboard and fonts. (Language/Country)
package locale-cs_CZ # Czech package locale-da_DK # Danish package locale-de_DE # German package locale-en_GB # English-Great Britain package locale-en_US # English-US package locale-es_ES # Spanish package locale-fi_FI # Finnish package locale-fr_BE # French Belgium package locale-fr_CA # French Canadian package locale-fr_CH # French Switzerland package locale-fr_FR # French package locale-hr_HR # Croation package locale-hu_HU # Hungarian package locale-it_IT # Italian package locale-ja_JP # Japanese package locale-nb_NO # Norwegian (bokmål) package locale-pl_PL # Polish package locale-pt_PT # Portuguese package locale-pt_BR # Portuguese-Brazil package locale-ru_RU # Russian package locale-sv_SE # Swedish package locale-tr_TR # Turkish
!Applications
!!Connection Package types. Choose at least one!
package freerdp # X RDP Client - fork of rdesktop package rdesktop # X RDP client for Windows Terminal Services (ver 1.7) package vncviewer # VNC client (vncviewer)
package xorg7vnc # Remote Control Client Workstation
package ica # Citrix ICA client support
package tarantella # Tarantella client support
package xnest # XDM in a window client
package urxvt # Light Xterm Client (vt102)
package xterm # Xterm Client (vt220)
package ssh # Secure Shell client
package tn5250 # 5250 terminal emulator
package dillo # Dillo light web browser
package thinlinc # Cendio ThinLinc client support
package nx # No Machine NX client
package 2x # 2X client
package spice # Redhat Spice Client
package java # Java runtime
package firefox # Firefox current Web Browser
package chrome # Google Chrome Web Browser
package chromium # Chromium Web Browser
package kiosk # Rkiosk Plugin for Firefox
package flash # Flash Current
package filezilla # FileZilla FTP Client for X
package git # GIT Version Control System
package gparted # Gnome Partition Manager
package open-vm-tools
package vboxguest
package medit # Notepad
package mplayer # DVD and video player
package vmview # VMware Open-View Client, PCOIP
package xbmc # XBMC Media Center for X
package evince # X PDF Viewer
package openkiosk # OpenKiosk is a cross platform kiosk web browser based on Mozilla Firefox
package xdmcp-connect # Simple connection to XDMCP server
!!Window Managers. Choose no more than 1 window manager.
Not needed if you don t want to manage windows.
package openbox # A spartin clean/fast window manager.
package xdesktop-kiosk # A locked down desktop kiosk using the openbox wm (See packages/xdesktop-kiosk/build/conf for
# more help.package icewm # "ICEWM" window manager. Makes TS a light workstation.
package icewm-theme-xp
package icewm-themes # Extra IceWM themes
package icewm-theme-bernstein
package icewm-theme-bluecrux
package icewm-theme-liquid
package xfwm4
package xfwm4-extra
package xfce4-power-manager package terminal # Terminal emulator for xfwm4 -- Pulls in xfwm4 package thunar # File Manager for xfwm4 -- Pulls in xfwm4
!!Window Manager Utils
package idle-shutdown # Package that lets you specify automatic shutdown settings and logic.
package wbar # Adds icons to desktop
package idesk
!!Other services
package www # Web access to client. From a browser: "http://
The standard page is for general user settings, administrative access
# is on port 6800.package lp_server # Remote printing daemon (JetDirect compatible)
package lpr # LPR Print Server, for use with samba-server package
package lprng # LPRng Print Server, supports network based printing
package cups
package sshd # Dropbear secure shell server
package tftpd # Built in tftpd server. Useful for making a tftpserver
# for thinstation on a WAN over a slow link.package samba-server # Samba server FS Support, allows you to share
# local floppy/cdrom/hd/printer to other Windows
# PCs. Needs supermount for removeable media.package samba-client # Samba smbclient, gives a shell like environment to access an samba server
package hdupdate # Package for updating TS images on a hardisk over a network connection
package scp # Add ability to download files over internet using scp. This package
# adds some networking based options for downloading configuration files or
# in using hdupdate package.package openvpn # OpenVPN Client Support
package vhusbip # The VirtualHere USB Server enables remote access to USB devices over a network.
# Install the Generic Build of the VirtualHere Server on an unlimited number of computers
# and share a single USB device per computer server, with no payment required.
# To share more than one USB device simultaneously from a single server you must purchase an "Unlimited Device License".!!PCSCD Card Readers
package gemplus410 # Card reader Gemplus 410 (Serial) and Gemplus 430 (USB)
package ccidreader # Generic USB card reader
package asedriveiiie-usb # Drivers for smart cards of readers of AseIIIeUSB and AseIIIeUSB KB
!!Miscellaneous
package gtk-2.0 # Full gtk-2.0 plus clearlooks theme package gtk-3.0 package gtk-theme-adwaita package icons-cursor # Anti Aliased Mouse Cursor Theme package icons-hicolor # Hi-Color icons for some applications and themes. Does not really contain any icons.
package icons-gnome # gnome Hi-Color icons theme. Needed by most other icon themes.
package icons-adwaita
package icons-tango # tango Hi-Color icons theme
package icons-neu # neu Hi-Color icons theme
package fonts-misc
package fonts-jis-misc # Japanese Industrial
package fonts-util
package fonts-cyrillic
package fonts-Speedo-Bitstream
package fonts-TTF-BH # This one works nicely most of the time and is small. package fonts-TTF-vera
package fonts-TTF-MS # Fonts for rendering documents developed on the MS Platform.
# Might want to talk to a lawyer before using these.package fonts-TTF-liberation package fonts-TTF-noto
package fonts-75dpi-Adobe
package fonts-75dpi-Adobe-Utopia
package fonts-75dpi-BH
package fonts-75dpi-BH-Typewriter
package fonts-75dpi-Bitstream
package fonts-100dpi-Adobe
package fonts-100dpi-Adobe-Utopia
package fonts-100dpi-BH
package fonts-100dpi-BH-Typewriter
package fonts-100dpi-Bitstream
package fonts-Type1-Adobe-Utopia
package fonts-Type1-BH
package fonts-Type1-Bitstream
package fonts-Type1-IBM
package fonts-Type1-xfree86
package lshw # list hardware
package e3 # Basic vi like Editor
package rox # Basic File Manager
package debug # metapackage to include other debugging packages and stop during bootup to check things.
package extensions # Adds various shell commands, will increase image size.
package extensions-x # Adds various utility s for the X Environment !!!! INCLUDES hwlister.sh !!!!
package eGalax # eGalax TouchKit Drivers/Utility for serial and usb touchscreens by EETI.
package installer # Wipes a drive, makes partitions and downloads thinstation from a pxe server
package devstation # Starts a tftp server that hosts files from the boot-images/pxe folder
package ca-bundle # Adds many standard SSL and PKI root certificats. Include this package if you have issues with certificate trusts.
package set-resolution # Allows the user to change the resolution via the start-menu.
package local-install # Makes it possible to install Thinstation locally on the machine but still have a central image
# management via automatic updates and version control when the client boots. For more information
# see /ts/build/Documentation/README.local-install and /ts/build/thinstation.conf.sample
# (generated during first build)package custom-idle # Shuts down the client based after X minutes if some applications/sessions are not running.
package custom-background # Allows you to dynamically set a diffrent background in the conf-files when the client boots.
# For example have a background-image in the build with an error-message and then in
# thinstation.conf.network set the "regular" background. This way the user will receive an
# error message on the screen if the client was unable to get the config files from the
# Web- or TFTP-server when it booted.package hdd-spindown # Sets hard drives into sleep mode (spin down) when they are idle. See thinstation.conf.sample for info.
package openssl # Probably needed by the Citrix Receiver 13.2 version.
Parameters
########################################
--- Miscellaneous Parameters ---
########################################
!!Basic
param fastboot true # Mangles the filesystem a special way as to improve boot spead and reduce
memory utilization. Cool/Dangerous . Harder to dubug other packages. (Finishing Touch)
# Set to 'true' to enable or 'lotsofmem' for slightly slower booting but no squash lag on app launch.param tsuser tsuser # Name of the user that thinstation will run as. Needs userauto package. param tsuserpasswd pleasechangeme # Do Change! Console/telnet password for non-root
param rootpasswd dtkjk35292 # Do Change! Console/telnet password for root
If this is enabled, Telnetd will be enabled.
param tsadminpasswd pleasechangeme # Admin password of web interface param xorgvncpasswd pleasechangeme # VNC Access Password param storagepasswd pleasechangeme # Password for storage server param dialuppasswd pleasechangeme # Password for dialin account param sambapasswd pleasechangeme # Password for samba shares when using user mode security
param kernelcmdline "radeon.modeset=0" # Add additional kernel command lines. e.g. disable radeon framebuffer
param stripelf yes # Strip extraneous information from elf binaries (Maybe not Safe)
param acpisupport disable # Tells the kernel not to load acpi modules. (Breaks some Intel Chipsets if disabled)
param uvesafb disable # Disable uvesafb (legacy option like modesetfb)
param extra_vid LVDS-1:d # Add an extra video= parameter to kernel cmd line (good for disabling outputs on video cards)
param bootlogo true # Enable or Disable the use of the Boot splash. param boottheme default # Backgound picture during boot
param splash verbose # kernel splash setting (0=off, silent or verbose (default=silent)
param splash silent param fbmtrr 0 # MTRR value for uvesafb (default = 0, 4 is the best) grep your log to make sure you have not set it to high
param fbnocrtc true # This is usually a good thing.
param fbsm ywrap # Window scrolling method (redraw, ypan, ywrap) ywrap is best, but may not work correctly for all people
param fbvtotal 16 # Override Video Bios Reported Memory in MB
param fbmaxhf 67 # Override Video Negotiated Max Horizontal Frequency
param fbmaxvf 61 # Override Video Negotiated Max Vertical Frequency
param fbmaxclk 155 # Override Video Negotiated Max Clock Frequency
param fbnoedid true # Don t do video edid
param bootresolution 1024x600-32 # Resolution used during Thinstation boot.
param bootresolution 1024x768-32 # You can wright your own resolution mode here, if you know it.
param bootresolution 1152x864-32
param bootresolution 1280x768-32
param bootresolution 1366x768-32 # Otherwise, you may want to refer to the vbe_modes.list you created with hwlister.sh
param bootresolution 1280x1024-32 # for modes that your card supports.
param bootresolution 1400x900-32 # It is also used by xrandr if no xrandr options are specified.
param bootresolution 1680x1050-32
param bootresolution 1920x1080-32
param bootresolution 1400x1050-32
param bootresolution 1920x1200-32
param desktop file:./backgrounds/Hive_Lite.jpg # Custom image to load as desktop background param defaultconfig thinstation.conf.buildtime # The file with default setup. No other config file is found
during boot.
param basename thinstation # Used for all config/tftp/scp file names param basepath ts6.1 # Used to determine path to tftp/scp files param baseurl http://www.doncuppjr.net # Used to determine url to wget files
param baseurl http://192.168.78.17 # Used to determine url to wget/http files - your local web server
param baseurl 'http://${SERVER_IP}' # Used to determine url to wget/http files - if you wan't to use a web server on the same server as the TFTP server
param keyfile ./id_rsa # Path for private key file used for ssh/scp
param knownhosts ./known_hosts # Path for ssh known_hosts file for ssh/scp
param localpkgs false # to determine is PKG files are to be loaded locally
param fulllocales true # Use full locale support for packages
param icaencryption false # Use ica encryption support, add 290k to image
param haltonerror false # Will halt on error, default is true param hardlinkfs true param sametimestmp true # When enabled, the timestamps for all files and folders will be set to 00:00 of todays date in your timezone param initrdcmd "gzip" # Compression mode and level of initrd file. none, gzip -9, lzma -9 ,bzip2 -9 param bootverbosity 3 # Increased vebosity when booting TS
0 no verbose messages
# 1 boot
# 2 network
# 4 init
# 8 kernel
# 16 modules
# 32 packages
# 64 email bootlog file to SMTP server & user set in
# thinstation.conf file. This will only work
# if networking is working.
#
# Combinations can be used (e.g. 24 does Kernel and Module Messages)!!Advanced
Leave this alone unless you can t download (wget required on your Linux box):
param downloads /downloads param bootimages "iso syslinux pxe refind"
param bootserver "192.168.1.1" # Used for the pxe image config files to specify where to download
# the syslinux image from. Result is generated in
# /ts/build/boot-images/pxe/boot/lpxelinux/pxelinux.cfg/default
# so that you can specify APPEND initrd=http://<bootserver>/boot/initrdparam syslinuxtheme "default"
param httpproxy http://192.168.1.2:8080
param bootfssize 50% # Modify the size of the tmpfs filesystem
package alltimezone param allres true # Includes a lot of resolution splash images for live-cd s param allfirmware true # Includes a lot of firmwares for live-cd s param earlymicrocode false # Builds microcode initramfs for early loading
by kernel. Needs kernel with MICROCODE_EARLY=y.
param blacklist snd-pcsp.ko
smittycsi
Thinstation
windows + vmware horizon view is fine
thinstation 6.1 + vmware view 4.10 was black screen ,
alway black