search

Thinstation / thinstation

A framework for making thin and light Linux based images for x86 based machines and thinclients.
https://www.thinstation.net/
788 stars 188 forks source link

Build TS for x86 512Mb RAM #738

Closed AlexanderZhirov closed 2 years ago

AlexanderZhirov commented 2 years ago

There is a thin client with the characteristics:

I'm trying to build a minimal image on base x86 (TS-5.6), according to the instructions, in order to analyze the hardware data.

The build with IceWM freezes when loading:

изображение

If I build without DE, then the distribution is loaded, but errors occur when calling the script. The network is working, all the data is in the screenshot:

изображение

Thinstation commented 2 years ago

Your tftp server has writes disabled. You need to have param allfirmware true in build.conf You may not be able to have a DE when doing this hardware check.

AlexanderZhirov commented 2 years ago

param allfirmware true

Apparently too large a size is formed during assembly. It also freezes when loading. Is there any way to reduce it all? It seems to me that it does not take out 512 megabytes. Where there is more RAM, it loads quite without problems. There is no way to expand the RAM, the memory bar is too old.

Kernel 4.14.70TS_SMP size is 4800K
Initrd size is 124826K
Thinstation commented 2 years ago

Try using just gz compression, the image will be larger, but the memory requirement will be lower.

AlexanderZhirov commented 2 years ago

Try using just gz compression, the image will be larger, but the memory requirement will be lower.

It seems that gzip is compressed by default

initrd: gzip compressed data, last modified: Sun Jun 26 19:42:21 2022, from Unix, original size modulo 2^32 300882432

build.conf.example:

param initrdcmd      "gzip"
AlexanderZhirov commented 2 years ago

Added compression as in 6.2 xz -9e --check=crc32 --threads=0, tomorrow I will check, I will write down what happened :wink:

Thinstation commented 2 years ago

Try without allfirmware. Hopefully, you will get a mesg in syslog.

AlexanderZhirov commented 2 years ago

Added compression as in 6.2 xz -9e --check=crc32 --threads=0, tomorrow I will check, I will write down what happened wink

It didn't help. Maybe some module is being pulled that freezes the system?

AlexanderZhirov commented 2 years ago

kernel log

Jan  2 09:00:06 (none) syslog.info syslogd started: BusyBox v1.23.1
Jan  2 09:00:06 (none) user.notice kernel: klogd started: BusyBox v1.23.1 (2018-04-07 16:49:01 UTC)
Jan  2 09:00:06 (none) user.notice kernel: Linux version 4.14.70TS_SMP (root@localhost.localdomain) (gcc version 5.3.0 (Thinstation)) #1 SMP PREEMPT Wed Sep 19 18:14:35 UTC 2018
Jan  2 09:00:06 (none) user.info kernel: KERNEL supported cpus:
Jan  2 09:00:06 (none) user.info kernel:   Intel GenuineIntel
Jan  2 09:00:06 (none) user.info kernel:   AMD AuthenticAMD
Jan  2 09:00:06 (none) user.info kernel:   NSC Geode by NSC
Jan  2 09:00:06 (none) user.info kernel:   Cyrix CyrixInstead
Jan  2 09:00:06 (none) user.info kernel:   Centaur CentaurHauls
Jan  2 09:00:06 (none) user.info kernel:   Transmeta GenuineTMx86
Jan  2 09:00:06 (none) user.info kernel:   Transmeta TransmetaCPU
Jan  2 09:00:06 (none) user.info kernel:   UMC UMC UMC UMC
Jan  2 09:00:06 (none) user.info kernel: x86/fpu: x87 FPU will use FSAVE
Jan  2 09:00:06 (none) user.info kernel: e820: BIOS-provided physical RAM map:
Jan  2 09:00:06 (none) user.info kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
Jan  2 09:00:06 (none) user.info kernel: BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
Jan  2 09:00:06 (none) user.info kernel: BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
Jan  2 09:00:06 (none) user.info kernel: BIOS-e820: [mem 0x0000000000100000-0x000000001efaffff] usable
Jan  2 09:00:06 (none) user.info kernel: BIOS-e820: [mem 0x000000001efb0000-0x000000001efb2fff] ACPI NVS
Jan  2 09:00:06 (none) user.info kernel: BIOS-e820: [mem 0x000000001efb3000-0x000000001efbffff] ACPI data
Jan  2 09:00:06 (none) user.info kernel: BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved
Jan  2 09:00:06 (none) user.notice kernel: Notice: NX (Execute Disable) protection missing in CPU!
Jan  2 09:00:06 (none) user.info kernel: SMBIOS 2.2 present.
Jan  2 09:00:06 (none) user.info kernel: DMI:  /AMD-GX3, BIOS 6.00 PG 04/22/2008
Jan  2 09:00:06 (none) user.info kernel: tsc: Fast TSC calibration using PIT
Jan  2 09:00:06 (none) user.debug kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
Jan  2 09:00:06 (none) user.debug kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
Jan  2 09:00:06 (none) user.info kernel: e820: last_pfn = 0x1efb0 max_arch_pfn = 0x100000
Jan  2 09:00:06 (none) user.info kernel: MTRR: Disabled
Jan  2 09:00:06 (none) user.info kernel: x86/PAT: MTRRs disabled, skipping PAT initialization too.
Jan  2 09:00:06 (none) user.info kernel: x86/PAT: Configuration [0-7]: WB  WT  UC- UC  WB  WT  UC- UC  
Jan  2 09:00:06 (none) user.debug kernel: initial memory mapped: [mem 0x00000000-0x177fffff]
Jan  2 09:00:06 (none) user.debug kernel: Base memory trampoline at [7809a000] 9a000 size 16384
Jan  2 09:00:06 (none) user.debug kernel: BRK [0x171de000, 0x171defff] PGTABLE
Jan  2 09:00:06 (none) user.debug kernel: BRK [0x171df000, 0x171e0fff] PGTABLE
Jan  2 09:00:06 (none) user.info kernel: RAMDISK: [mem 0x1863a000-0x1d071fff]
Jan  2 09:00:06 (none) user.info kernel: ACPI: Early table checksum verification disabled
Jan  2 09:00:06 (none) user.info kernel: ACPI: RSDP 0x00000000000F60D0 000014 (v00 AMDGX3)
Jan  2 09:00:06 (none) user.info kernel: ACPI: RSDT 0x000000001EFB3000 000028 (v01 AMDGX3 AWRDACPI 42302E31 AWRD 00000000)
Jan  2 09:00:06 (none) user.info kernel: ACPI: FACP 0x000000001EFB3080 000074 (v01 AMDGX3 AWRDACPI 42302E31 AWRD 00000000)
Jan  2 09:00:06 (none) user.warn kernel: ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 16, using default 8 (20170728/tbfadt-708)
Jan  2 09:00:06 (none) user.info kernel: ACPI: DSDT 0x000000001EFB3100 002CBD (v01 AMDGX3 AWRDACPI 00001000 MSFT 03000000)
Jan  2 09:00:06 (none) user.info kernel: ACPI: FACS 0x000000001EFB0000 000040
Jan  2 09:00:06 (none) user.notice kernel: 0MB HIGHMEM available.
Jan  2 09:00:06 (none) user.notice kernel: 495MB LOWMEM available.
Jan  2 09:00:06 (none) user.info kernel:   mapped low ram: 0 - 1efb0000
Jan  2 09:00:06 (none) user.info kernel:   low ram: 0 - 1efb0000
Jan  2 09:00:06 (none) user.debug kernel: BRK [0x171e1000, 0x171e1fff] PGTABLE
Jan  2 09:00:06 (none) user.info kernel: Zone ranges:
Jan  2 09:00:06 (none) user.info kernel:   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
Jan  2 09:00:06 (none) user.info kernel:   Normal   [mem 0x0000000001000000-0x000000001efaffff]
Jan  2 09:00:06 (none) user.info kernel:   HighMem  empty
Jan  2 09:00:06 (none) user.info kernel: Movable zone start for each node
Jan  2 09:00:06 (none) user.info kernel: Early memory node ranges
Jan  2 09:00:06 (none) user.info kernel:   node   0: [mem 0x0000000000001000-0x000000000009dfff]
Jan  2 09:00:06 (none) user.info kernel:   node   0: [mem 0x0000000000100000-0x000000001efaffff]
Jan  2 09:00:06 (none) user.info kernel: Initmem setup node 0 [mem 0x0000000000001000-0x000000001efaffff]
Jan  2 09:00:06 (none) user.debug kernel: On node 0 totalpages: 126797
Jan  2 09:00:06 (none) user.debug kernel:   DMA zone: 40 pages used for memmap
Jan  2 09:00:06 (none) user.debug kernel:   DMA zone: 0 pages reserved
Jan  2 09:00:06 (none) user.debug kernel:   DMA zone: 3997 pages, LIFO batch:0
Jan  2 09:00:06 (none) user.debug kernel:   Normal zone: 1200 pages used for memmap
Jan  2 09:00:06 (none) user.debug kernel:   Normal zone: 122800 pages, LIFO batch:31
Jan  2 09:00:06 (none) user.info kernel: Using APIC driver default
Jan  2 09:00:06 (none) user.info kernel: ACPI: PM-Timer IO Port: 0x9c10
Jan  2 09:00:06 (none) user.info kernel: No local APIC present or hardware disabled
Jan  2 09:00:06 (none) user.info kernel: APIC: disable apic facility
Jan  2 09:00:06 (none) user.info kernel: APIC: switched to apic NOOP
Jan  2 09:00:06 (none) user.info kernel: smpboot: Allowing 1 CPUs, 0 hotplug CPUs
Jan  2 09:00:06 (none) user.info kernel: e820: [mem 0x1efc0000-0xfffeffff] available for PCI devices
Jan  2 09:00:06 (none) user.info kernel: Booting paravirtualized kernel on bare hardware
Jan  2 09:00:06 (none) user.info kernel: clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
Jan  2 09:00:06 (none) user.notice kernel: random: get_random_bytes called from start_kernel+0x74/0x3cf with crng_init=0
Jan  2 09:00:06 (none) user.info kernel: setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:1 nr_node_ids:1
Jan  2 09:00:06 (none) user.info kernel: percpu: Embedded 27 pages/cpu @96a92000 s80076 r0 d30516 u110592
Jan  2 09:00:06 (none) user.debug kernel: pcpu-alloc: s80076 r0 d30516 u110592 alloc=27*4096
Jan  2 09:00:06 (none) user.debug kernel: pcpu-alloc: [0] 0 
Jan  2 09:00:06 (none) user.info kernel: Built 1 zonelists, mobility grouping on.  Total pages: 125557
Jan  2 09:00:06 (none) user.notice kernel: Kernel command line: usbhid.quirks=0x1bfd:0x3050:0x40 BOOT_IMAGE=/thinstation/x86/current/vmlinuz
Jan  2 09:00:06 (none) user.info kernel: PID hash table entries: 2048 (order: 1, 8192 bytes)
Jan  2 09:00:06 (none) user.info kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Jan  2 09:00:06 (none) user.info kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Jan  2 09:00:06 (none) user.debug kernel: BRK [0x171e2000, 0x171e2fff] PGTABLE
Jan  2 09:00:06 (none) user.debug kernel: BRK [0x171e3000, 0x171e3fff] PGTABLE
Jan  2 09:00:06 (none) user.info kernel: Initializing CPU#0
Jan  2 09:00:06 (none) user.info kernel: Initializing HighMem for node 0 (00000000:00000000)
Jan  2 09:00:06 (none) user.info kernel: Memory: 415352K/507188K available (5855K kernel code, 393K rwdata, 2324K rodata, 596K init, 480K bss, 91836K reserved, 0K cma-reserved, 0K highmem)
Jan  2 09:00:06 (none) user.info kernel: virtual kernel memory layout:
Jan  2 09:00:06 (none) user.info kernel:     fixmap  : 0xffab4000 - 0xfffff000   (5420 kB)
Jan  2 09:00:06 (none) user.info kernel:   cpu_entry : 0xfec00000 - 0xff5c1000   (9988 kB)
Jan  2 09:00:06 (none) user.info kernel:     pkmap   : 0xfe800000 - 0xfec00000   (4096 kB)
Jan  2 09:00:06 (none) user.info kernel:     vmalloc : 0x977b0000 - 0xfe7fe000   (1648 MB)
Jan  2 09:00:06 (none) user.info kernel:     lowmem  : 0x78000000 - 0x96fb0000   ( 495 MB)
Jan  2 09:00:06 (none) user.info kernel:       .init : 0x8f06c000 - 0x8f101000   ( 596 kB)
Jan  2 09:00:06 (none) user.info kernel:       .data : 0x8edb7df4 - 0x8f063500   (2733 kB)
Jan  2 09:00:06 (none) user.info kernel:       .text : 0x8e800000 - 0x8edb7df4   (5855 kB)
Jan  2 09:00:06 (none) user.info kernel: Checking if this processor honours the WP bit even in supervisor mode...Ok.
Jan  2 09:00:06 (none) user.info kernel: SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Jan  2 09:00:06 (none) user.info kernel: Preemptible hierarchical RCU implementation.
Jan  2 09:00:06 (none) user.info kernel:    RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=1.
Jan  2 09:00:06 (none) user.info kernel:    Tasks RCU enabled.
Jan  2 09:00:06 (none) user.info kernel: RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
Jan  2 09:00:06 (none) user.info kernel: NR_IRQS: 4352, nr_irqs: 32, preallocated irqs: 16
Jan  2 09:00:06 (none) user.debug kernel: CPU 0 irqstacks, hard=96414000 soft=96416000
Jan  2 09:00:06 (none) user.info kernel: Console: colour VGA+ 80x25
Jan  2 09:00:06 (none) user.info kernel: console [tty0] enabled
Jan  2 09:00:06 (none) user.info kernel: tsc: Fast TSC calibration using PIT
Jan  2 09:00:06 (none) user.info kernel: tsc: Detected 498.620 MHz processor
Jan  2 09:00:06 (none) user.info kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 997.24 BogoMIPS (lpj=498620)
Jan  2 09:00:06 (none) user.info kernel: pid_max: default: 32768 minimum: 301
Jan  2 09:00:06 (none) user.info kernel: ACPI: Core revision 20170728
Jan  2 09:00:06 (none) user.info kernel: ACPI: 1 ACPI AML tables successfully acquired and loaded
Jan  2 09:00:06 (none) user.warn kernel: ACPI: setting ELCR to 0200 (from 0c20)
Jan  2 09:00:06 (none) user.info kernel: Security Framework initialized
Jan  2 09:00:06 (none) user.info kernel: Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Jan  2 09:00:06 (none) user.info kernel: Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Jan  2 09:00:06 (none) user.info kernel: Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Jan  2 09:00:06 (none) user.info kernel: Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
Jan  2 09:00:06 (none) user.err kernel: Spectre V2 : Spectre mitigation: LFENCE not serializing, switching to generic retpoline
Jan  2 09:00:06 (none) user.info kernel: Spectre V2 : Vulnerable: Minimal generic ASM retpoline
Jan  2 09:00:06 (none) user.info kernel: Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Jan  2 09:00:06 (none) user.info kernel: Speculative Store Bypass: Vulnerable
Jan  2 09:00:06 (none) user.info kernel: Freeing SMP alternatives memory: 24K
Jan  2 09:00:06 (none) user.info kernel: smpboot: Max logical packages: 1
Jan  2 09:00:06 (none) user.warn kernel: smpboot: weird, boot CPU (#0) not listed by the BIOS
Jan  2 09:00:06 (none) user.notice kernel: smpboot: SMP motherboard not detected
Jan  2 09:00:06 (none) user.info kernel: smpboot: SMP disabled
Jan  2 09:00:06 (none) user.notice kernel: smpboot: Local APIC not detected. Using dummy APIC emulation.
Jan  2 09:00:06 (none) user.info kernel: Performance Events: no PMU driver, software events only.
Jan  2 09:00:06 (none) user.info kernel: Hierarchical SRCU implementation.
Jan  2 09:00:06 (none) user.info kernel: smp: Bringing up secondary CPUs ...
Jan  2 09:00:06 (none) user.info kernel: smp: Brought up 1 node, 1 CPU
Jan  2 09:00:06 (none) user.info kernel: smpboot: Total of 1 processors activated (997.24 BogoMIPS)
Jan  2 09:00:06 (none) user.info kernel: devtmpfs: initialized
Jan  2 09:00:06 (none) user.info kernel: PM: Registering ACPI NVS region [mem 0x1efb0000-0x1efb2fff] (12288 bytes)
Jan  2 09:00:06 (none) user.info kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
Jan  2 09:00:06 (none) user.info kernel: futex hash table entries: 256 (order: 2, 16384 bytes)
Jan  2 09:00:06 (none) user.info kernel: pinctrl core: initialized pinctrl subsystem
Jan  2 09:00:06 (none) user.info kernel: NET: Registered protocol family 16
Jan  2 09:00:06 (none) user.info kernel: cpuidle: using governor ladder
Jan  2 09:00:06 (none) user.info kernel: cpuidle: using governor menu
Jan  2 09:00:06 (none) user.info kernel: clocksource: pit: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1601818034827 ns
Jan  2 09:00:06 (none) user.info kernel: ACPI: bus type PCI registered
Jan  2 09:00:06 (none) user.info kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Jan  2 09:00:06 (none) user.info kernel: PCI: PCI BIOS revision 2.10 entry at 0xfaad0, last bus=0
Jan  2 09:00:06 (none) user.info kernel: PCI: Using configuration type 1 for base access
Jan  2 09:00:06 (none) user.info kernel: ACPI: Added _OSI(Module Device)
Jan  2 09:00:06 (none) user.info kernel: ACPI: Added _OSI(Processor Device)
Jan  2 09:00:06 (none) user.info kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
Jan  2 09:00:06 (none) user.info kernel: ACPI: Added _OSI(Processor Aggregator Device)
Jan  2 09:00:06 (none) user.info kernel: ACPI: Interpreter enabled
Jan  2 09:00:06 (none) user.info kernel: ACPI: (supports S0 S1 S3 S5)
Jan  2 09:00:06 (none) user.info kernel: ACPI: Using PIC for interrupt routing
Jan  2 09:00:06 (none) user.info kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Jan  2 09:00:06 (none) user.info kernel: ACPI: Enabled 7 GPEs in block 00 to 1F
Jan  2 09:00:06 (none) user.info kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
Jan  2 09:00:06 (none) user.info kernel: acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
Jan  2 09:00:06 (none) user.info kernel: acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
Jan  2 09:00:06 (none) user.warn kernel: acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
Jan  2 09:00:06 (none) user.info kernel: PCI host bridge to bus 0000:00
Jan  2 09:00:06 (none) user.info kernel: pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
Jan  2 09:00:06 (none) user.info kernel: pci_bus 0000:00: root bus resource [io  0x0d00-0xac17 window]
Jan  2 09:00:06 (none) user.info kernel: pci_bus 0000:00: root bus resource [io  0xac20-0xffff window]
Jan  2 09:00:06 (none) user.info kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
Jan  2 09:00:06 (none) user.info kernel: pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000dffff window]
Jan  2 09:00:06 (none) user.info kernel: pci_bus 0000:00: root bus resource [mem 0x1efc0000-0xfebfffff window]
Jan  2 09:00:06 (none) user.info kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
Jan  2 09:00:06 (none) user.debug kernel: pci 0000:00:01.0: [1022:2080] type 00 class 0x060000
Jan  2 09:00:06 (none) user.debug kernel: pci 0000:00:01.0: reg 0x10: [io  0xac1c-0xac1f]
Jan  2 09:00:06 (none) user.debug kernel: pci 0000:00:01.0: reg 0x14: [io  0x9e00-0x9e07]
Jan  2 09:00:06 (none) user.debug kernel: pci 0000:00:01.1: [1022:2081] type 00 class 0x030000
Jan  2 09:00:06 (none) user.debug kernel: pci 0000:00:01.1: reg 0x10: [mem 0xec000000-0xedffffff]
Jan  2 09:00:06 (none) user.debug kernel: pci 0000:00:01.1: reg 0x14: [mem 0xefff0000-0xefff3fff]
Jan  2 09:00:06 (none) user.debug kernel: pci 0000:00:01.1: reg 0x18: [mem 0xeffec000-0xeffeffff]
Jan  2 09:00:06 (none) user.debug kernel: pci 0000:00:01.1: reg 0x1c: [mem 0xeffe8000-0xeffebfff]
Jan  2 09:00:06 (none) user.debug kernel: pci 0000:00:01.1: reg 0x20: [mem 0xefff8000-0xefffbfff]
Jan  2 09:00:06 (none) user.debug kernel: pci 0000:00:01.2: [1022:2082] type 00 class 0x101000
Jan  2 09:00:06 (none) user.debug kernel: pci 0000:00:01.2: reg 0x10: [mem 0xefff4000-0xefff7fff]
Jan  2 09:00:06 (none) user.debug kernel: pci 0000:00:0d.0: [10ec:8139] type 00 class 0x020000
Jan  2 09:00:06 (none) user.debug kernel: pci 0000:00:0d.0: reg 0x10: [io  0xfc00-0xfcff]
Jan  2 09:00:06 (none) user.debug kernel: pci 0000:00:0d.0: reg 0x14: [mem 0xeffff000-0xeffff0ff]
Jan  2 09:00:06 (none) user.debug kernel: pci 0000:00:0d.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
Jan  2 09:00:06 (none) user.debug kernel: pci 0000:00:0d.0: supports D1 D2
Jan  2 09:00:06 (none) user.debug kernel: pci 0000:00:0d.0: PME# supported from D1 D2 D3hot D3cold
Jan  2 09:00:06 (none) user.debug kernel: pci 0000:00:0f.0: [1022:2090] type 00 class 0x060100
Jan  2 09:00:06 (none) user.debug kernel: pci 0000:00:0f.0: reg 0x10: [io  0x6000-0x6007]
Jan  2 09:00:06 (none) user.debug kernel: pci 0000:00:0f.0: reg 0x14: [io  0x6100-0x61ff]
Jan  2 09:00:06 (none) user.debug kernel: pci 0000:00:0f.0: reg 0x18: [io  0x6200-0x623f]
Jan  2 09:00:06 (none) user.debug kernel: pci 0000:00:0f.0: reg 0x1c: [io  0x0000-0x001f]
Jan  2 09:00:06 (none) user.debug kernel: pci 0000:00:0f.0: reg 0x20: [io  0x9d00-0x9d7f]
Jan  2 09:00:06 (none) user.debug kernel: pci 0000:00:0f.0: reg 0x24: [io  0x9c00-0x9c3f]
Jan  2 09:00:06 (none) user.debug kernel: pci 0000:00:0f.2: [1022:209a] type 00 class 0x010180
Jan  2 09:00:06 (none) user.debug kernel: pci 0000:00:0f.2: reg 0x20: [io  0xff00-0xff0f]
Jan  2 09:00:06 (none) user.info kernel: pci 0000:00:0f.2: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
Jan  2 09:00:06 (none) user.info kernel: pci 0000:00:0f.2: legacy IDE quirk: reg 0x14: [io  0x03f6]
Jan  2 09:00:06 (none) user.info kernel: pci 0000:00:0f.2: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
Jan  2 09:00:06 (none) user.info kernel: pci 0000:00:0f.2: legacy IDE quirk: reg 0x1c: [io  0x0376]
Jan  2 09:00:06 (none) user.debug kernel: pci 0000:00:0f.3: [1022:2093] type 00 class 0x040100
Jan  2 09:00:06 (none) user.debug kernel: pci 0000:00:0f.3: reg 0x10: [io  0xfe00-0xfe7f]
Jan  2 09:00:06 (none) user.debug kernel: pci 0000:00:0f.4: [1022:2094] type 00 class 0x0c0310
Jan  2 09:00:06 (none) user.debug kernel: pci 0000:00:0f.4: reg 0x10: [mem 0xefffe000-0xefffefff]
Jan  2 09:00:06 (none) user.debug kernel: pci 0000:00:0f.4: PME# supported from D0 D3hot D3cold
Jan  2 09:00:06 (none) user.debug kernel: pci 0000:00:0f.5: [1022:2095] type 00 class 0x0c0320
Jan  2 09:00:06 (none) user.debug kernel: pci 0000:00:0f.5: reg 0x10: [mem 0xefffd000-0xefffdfff]
Jan  2 09:00:06 (none) user.debug kernel: pci 0000:00:0f.5: PME# supported from D0 D3hot D3cold
Jan  2 09:00:06 (none) user.debug kernel: pci_bus 0000:00: on NUMA node 0
Jan  2 09:00:06 (none) user.info kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
Jan  2 09:00:06 (none) user.info kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 5 10 *11)
Jan  2 09:00:06 (none) user.info kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 11) *0, disabled.
Jan  2 09:00:06 (none) user.info kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 11) *0
Jan  2 09:00:06 (none) user.info kernel: pci 0000:00:01.1: vgaarb: setting as boot VGA device
Jan  2 09:00:06 (none) user.info kernel: pci 0000:00:01.1: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
Jan  2 09:00:06 (none) user.info kernel: pci 0000:00:01.1: vgaarb: bridge control possible
Jan  2 09:00:06 (none) user.info kernel: vgaarb: loaded
Jan  2 09:00:06 (none) user.info kernel: ACPI: bus type USB registered
Jan  2 09:00:06 (none) user.info kernel: usbcore: registered new interface driver usbfs
Jan  2 09:00:06 (none) user.info kernel: usbcore: registered new interface driver hub
Jan  2 09:00:06 (none) user.info kernel: usbcore: registered new device driver usb
Jan  2 09:00:06 (none) user.info kernel: PCI: Using ACPI for IRQ routing
Jan  2 09:00:06 (none) user.debug kernel: PCI: pci_cache_line_size set to 32 bytes
Jan  2 09:00:06 (none) user.info kernel: pci 0000:00:01.0: can't claim BAR 0 [io  0xac1c-0xac1f]: no compatible bridge window
Jan  2 09:00:06 (none) user.debug kernel: e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
Jan  2 09:00:06 (none) user.debug kernel: e820: reserve RAM buffer [mem 0x1efb0000-0x1fffffff]
Jan  2 09:00:06 (none) user.info kernel: NetLabel: Initializing
Jan  2 09:00:06 (none) user.info kernel: NetLabel:  domain hash size = 128
Jan  2 09:00:06 (none) user.info kernel: NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
Jan  2 09:00:06 (none) user.info kernel: NetLabel:  unlabeled traffic allowed by default
Jan  2 09:00:06 (none) user.info kernel: clocksource: Switched to clocksource pit
Jan  2 09:00:06 (none) user.info kernel: pnp: PnP ACPI init
Jan  2 09:00:06 (none) user.info kernel: system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
Jan  2 09:00:06 (none) user.info kernel: system 00:00: [mem 0x1efb0000-0x1efbffff] could not be reserved
Jan  2 09:00:06 (none) user.info kernel: system 00:00: [mem 0xffff0000-0xffffffff] has been reserved
Jan  2 09:00:06 (none) user.info kernel: system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
Jan  2 09:00:06 (none) user.info kernel: system 00:00: [mem 0x00100000-0x1efaffff] could not be reserved
Jan  2 09:00:06 (none) user.info kernel: system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
Jan  2 09:00:06 (none) user.debug kernel: system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
Jan  2 09:00:06 (none) user.warn kernel: pnp 00:01: disabling [io  0x0010-0x001f] because it overlaps 0000:00:0f.0 BAR 3 [io  0x0000-0x001f]
Jan  2 09:00:06 (none) user.info kernel: system 00:01: [io  0x0b78-0x0b7b] has been reserved
Jan  2 09:00:06 (none) user.info kernel: system 00:01: [io  0x0f78-0x0f7b] has been reserved
Jan  2 09:00:06 (none) user.info kernel: system 00:01: [io  0x0a78-0x0a7b] has been reserved
Jan  2 09:00:06 (none) user.info kernel: system 00:01: [io  0x0e78-0x0e7b] has been reserved
Jan  2 09:00:06 (none) user.info kernel: system 00:01: [io  0x0bbc-0x0bbf] has been reserved
Jan  2 09:00:06 (none) user.info kernel: system 00:01: [io  0x0fbc-0x0fbf] has been reserved
Jan  2 09:00:06 (none) user.info kernel: system 00:01: [io  0x04d0-0x04d1] has been reserved
Jan  2 09:00:06 (none) user.debug kernel: system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
Jan  2 09:00:06 (none) user.debug kernel: pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
Jan  2 09:00:06 (none) user.debug kernel: pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
Jan  2 09:00:06 (none) user.debug kernel: pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
Jan  2 09:00:06 (none) user.info kernel: pnp: PnP ACPI: found 5 devices
Jan  2 09:00:06 (none) user.info kernel: clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
Jan  2 09:00:06 (none) user.info kernel: clocksource: Switched to clocksource acpi_pm
Jan  2 09:00:06 (none) user.info kernel: pci 0000:00:0d.0: BAR 6: assigned [mem 0x1efc0000-0x1efcffff pref]
Jan  2 09:00:06 (none) user.info kernel: pci 0000:00:0f.0: BAR 3: assigned [io  0x1000-0x101f]
Jan  2 09:00:06 (none) user.debug kernel: pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
Jan  2 09:00:06 (none) user.debug kernel: pci_bus 0000:00: resource 5 [io  0x0d00-0xac17 window]
Jan  2 09:00:06 (none) user.debug kernel: pci_bus 0000:00: resource 6 [io  0xac20-0xffff window]
Jan  2 09:00:06 (none) user.debug kernel: pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff window]
Jan  2 09:00:06 (none) user.debug kernel: pci_bus 0000:00: resource 8 [mem 0x000c8000-0x000dffff window]
Jan  2 09:00:06 (none) user.debug kernel: pci_bus 0000:00: resource 9 [mem 0x1efc0000-0xfebfffff window]
Jan  2 09:00:06 (none) user.info kernel: NET: Registered protocol family 2
Jan  2 09:00:06 (none) user.info kernel: TCP established hash table entries: 4096 (order: 2, 16384 bytes)
Jan  2 09:00:06 (none) user.info kernel: TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
Jan  2 09:00:06 (none) user.info kernel: TCP: Hash tables configured (established 4096 bind 4096)
Jan  2 09:00:06 (none) user.info kernel: UDP hash table entries: 256 (order: 1, 8192 bytes)
Jan  2 09:00:06 (none) user.info kernel: UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
Jan  2 09:00:06 (none) user.info kernel: NET: Registered protocol family 1
Jan  2 09:00:06 (none) user.info kernel: pci 0000:00:01.1: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
Jan  2 09:00:06 (none) user.warn kernel: ACPI: PCI Interrupt Link [LNKD] BIOS reported IRQ 0, using IRQ 11
Jan  2 09:00:06 (none) user.warn kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
Jan  2 09:00:06 (none) user.debug kernel: PCI: setting IRQ 11 as level-triggered
Jan  2 09:00:06 (none) user.debug kernel: PCI: CLS 32 bytes, default 32
Jan  2 09:00:06 (none) user.info kernel: Trying to unpack rootfs image as initramfs...
Jan  2 09:00:06 (none) user.notice kernel: random: fast init done
Jan  2 09:00:06 (none) user.notice kernel: random: crng init done
Jan  2 09:00:06 (none) user.info kernel: Freeing initrd memory: 76000K
Jan  2 09:00:06 (none) user.info kernel: audit: initializing netlink subsys (disabled)
Jan  2 09:00:06 (none) user.notice kernel: Initialise system trusted keyrings
Jan  2 09:00:06 (none) user.notice kernel: audit: type=2000 audit(1167757205.000:1): state=initialized audit_enabled=0 res=1
Jan  2 09:00:06 (none) user.info kernel: workingset: timestamp_bits=14 max_order=17 bucket_order=3
Jan  2 09:00:06 (none) user.info kernel: squashfs: version 4.0 (2009/01/31) Phillip Lougher
Jan  2 09:00:06 (none) user.info kernel: NET: Registered protocol family 38
Jan  2 09:00:06 (none) user.notice kernel: Key type asymmetric registered
Jan  2 09:00:06 (none) user.notice kernel: Asymmetric key parser 'x509' registered
Jan  2 09:00:06 (none) user.info kernel: bounce: pool size: 64 pages
Jan  2 09:00:06 (none) user.info kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
Jan  2 09:00:06 (none) user.info kernel: io scheduler noop registered
Jan  2 09:00:06 (none) user.info kernel: io scheduler cfq registered (default)
Jan  2 09:00:06 (none) user.info kernel: io scheduler mq-deadline registered
Jan  2 09:00:06 (none) user.info kernel: io scheduler kyber registered
Jan  2 09:00:06 (none) user.info kernel: ACPI: AC Adapter [AC] (on-line)
Jan  2 09:00:06 (none) user.info kernel: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
Jan  2 09:00:06 (none) user.info kernel: ACPI: Power Button [PWRB]
Jan  2 09:00:06 (none) user.info kernel: input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
Jan  2 09:00:06 (none) user.info kernel: ACPI: Sleep Button [SLPB]
Jan  2 09:00:06 (none) user.info kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
Jan  2 09:00:06 (none) user.info kernel: ACPI: Power Button [PWRF]
Jan  2 09:00:06 (none) user.info kernel: Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled
Jan  2 09:00:06 (none) user.info kernel: 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Jan  2 09:00:06 (none) user.info kernel: AMD Geode RNG detected
Jan  2 09:00:06 (none) user.info kernel: Linux agpgart interface v0.103
Jan  2 09:00:06 (none) user.info kernel: brd: module loaded
Jan  2 09:00:06 (none) user.info kernel: loop: module loaded
Jan  2 09:00:06 (none) user.info kernel: libphy: Fixed MDIO Bus: probed
Jan  2 09:00:06 (none) user.info kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan  2 09:00:06 (none) user.info kernel: ehci-pci: EHCI PCI platform driver
Jan  2 09:00:06 (none) user.info kernel: ehci-pci 0000:00:0f.5: EHCI Host Controller
Jan  2 09:00:06 (none) user.info kernel: ehci-pci 0000:00:0f.5: new USB bus registered, assigned bus number 1
Jan  2 09:00:06 (none) user.info kernel: ehci-pci 0000:00:0f.5: irq 11, io mem 0xefffd000
Jan  2 09:00:06 (none) user.info kernel: ehci-pci 0000:00:0f.5: USB 2.0 started, EHCI 1.00
Jan  2 09:00:06 (none) user.info kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Jan  2 09:00:06 (none) user.info kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan  2 09:00:06 (none) user.info kernel: usb usb1: Product: EHCI Host Controller
Jan  2 09:00:06 (none) user.info kernel: usb usb1: Manufacturer: Linux 4.14.70TS_SMP ehci_hcd
Jan  2 09:00:06 (none) user.info kernel: usb usb1: SerialNumber: 0000:00:0f.5
Jan  2 09:00:06 (none) user.info kernel: hub 1-0:1.0: USB hub found
Jan  2 09:00:06 (none) user.info kernel: hub 1-0:1.0: 4 ports detected
Jan  2 09:00:06 (none) user.info kernel: ehci-platform: EHCI generic platform driver
Jan  2 09:00:06 (none) user.info kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Jan  2 09:00:06 (none) user.info kernel: ohci-pci: OHCI PCI platform driver
Jan  2 09:00:06 (none) user.info kernel: ohci-pci 0000:00:0f.4: OHCI PCI host controller
Jan  2 09:00:06 (none) user.info kernel: ohci-pci 0000:00:0f.4: new USB bus registered, assigned bus number 2
Jan  2 09:00:06 (none) user.info kernel: ohci-pci 0000:00:0f.4: irq 11, io mem 0xefffe000
Jan  2 09:00:06 (none) user.info kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
Jan  2 09:00:06 (none) user.info kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jan  2 09:00:06 (none) user.info kernel: usb usb2: Product: OHCI PCI host controller
Jan  2 09:00:06 (none) user.info kernel: usb usb2: Manufacturer: Linux 4.14.70TS_SMP ohci_hcd
Jan  2 09:00:06 (none) user.info kernel: usb usb2: SerialNumber: 0000:00:0f.4
Jan  2 09:00:06 (none) user.info kernel: hub 2-0:1.0: USB hub found
Jan  2 09:00:06 (none) user.info kernel: hub 2-0:1.0: 4 ports detected
Jan  2 09:00:06 (none) user.info kernel: ohci-platform: OHCI generic platform driver
Jan  2 09:00:06 (none) user.info kernel: uhci_hcd: USB Universal Host Controller Interface driver
Jan  2 09:00:06 (none) user.info kernel: i8042: PNP: No PS/2 controller found.
Jan  2 09:00:06 (none) user.info kernel: i8042: Probing ports directly.
Jan  2 09:00:06 (none) user.info kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Jan  2 09:00:06 (none) user.info kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Jan  2 09:00:06 (none) user.info kernel: mousedev: PS/2 mouse device common for all mice
Jan  2 09:00:06 (none) user.info kernel: rtc_cmos 00:02: RTC can wake from S4
Jan  2 09:00:06 (none) user.info kernel: rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
Jan  2 09:00:06 (none) user.info kernel: rtc_cmos 00:02: alarms up to one day, 242 bytes nvram
Jan  2 09:00:06 (none) user.info kernel: IR NEC protocol handler initialized
Jan  2 09:00:06 (none) user.info kernel: IR RC5(x/sz) protocol handler initialized
Jan  2 09:00:06 (none) user.info kernel: IR RC6 protocol handler initialized
Jan  2 09:00:06 (none) user.info kernel: IR JVC protocol handler initialized
Jan  2 09:00:06 (none) user.info kernel: IR Sony protocol handler initialized
Jan  2 09:00:06 (none) user.info kernel: IR SANYO protocol handler initialized
Jan  2 09:00:06 (none) user.info kernel: IR Sharp protocol handler initialized
Jan  2 09:00:06 (none) user.info kernel: IR MCE Keyboard/mouse protocol handler initialized
Jan  2 09:00:06 (none) user.info kernel: IR XMP protocol handler initialized
Jan  2 09:00:06 (none) user.info kernel: cpufreq_nforce2: No nForce2 chipset
Jan  2 09:00:06 (none) user.info kernel: ledtrig-cpu: registered to indicate activity on CPUs
Jan  2 09:00:06 (none) user.info kernel: hidraw: raw HID events driver (C) Jiri Kosina
Jan  2 09:00:06 (none) user.info kernel: usbcore: registered new interface driver usbhid
Jan  2 09:00:06 (none) user.info kernel: usbhid: USB HID core driver
Jan  2 09:00:06 (none) user.info kernel: ashmem: initialized
Jan  2 09:00:06 (none) user.info kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Jan  2 09:00:06 (none) user.info kernel: Initializing XFRM netlink socket
Jan  2 09:00:06 (none) user.info kernel: NET: Registered protocol family 10
Jan  2 09:00:06 (none) user.info kernel: Segment Routing with IPv6
Jan  2 09:00:06 (none) user.info kernel: mip6: Mobile IPv6
Jan  2 09:00:06 (none) user.info kernel: NET: Registered protocol family 17
Jan  2 09:00:06 (none) user.err kernel: mce: Unable to init MCE device (rc: -5)
Jan  2 09:00:06 (none) user.info kernel: Using IPI No-Shortcut mode
Jan  2 09:00:06 (none) user.info kernel: sched_clock: Marking stable (15176022965, 0)->(15177401383, -1378418)
Jan  2 09:00:06 (none) user.info kernel: registered taskstats version 1
Jan  2 09:00:06 (none) user.notice kernel: Loading compiled-in X.509 certificates
Jan  2 09:00:06 (none) user.notice kernel: Loaded X.509 cert 'Magrathea: Glacier signing key: 9bbe8df2f6d7f52c9cb36cfbed7542b0a3979212'
Jan  2 09:00:06 (none) user.notice kernel: Loaded X.509 cert 'Magrathea: Glacier signing key: 9bbe8df2f6d7f52c9cb36cfbed7542b0a3979212'
Jan  2 09:00:06 (none) user.info kernel: rtc_cmos 00:02: setting system clock to 2007-01-02 17:00:06 UTC (1167757206)
Jan  2 09:00:06 (none) user.info kernel: Freeing unused kernel memory: 596K
Jan  2 09:00:06 (none) user.info kernel: Write protecting the kernel text: 5856k
Jan  2 09:00:06 (none) user.info kernel: Write protecting the kernel read-only data: 2340k
Jan  2 09:00:06 (none) user.info kernel: rodata_test: all tests were successful
Jan  2 09:00:06 (none) user.info kernel: usb 2-1: new low-speed USB device number 2 using ohci-pci
Jan  2 09:00:06 (none) user.warn kernel: bbswitch: loading out-of-tree module taints kernel.
Jan  2 09:00:06 (none) user.info kernel: bbswitch: version 0.8
Jan  2 09:00:06 (none) user.warn kernel: bbswitch: cannot find ACPI handle for VGA device 0000:00:01.1
Jan  2 09:00:06 (none) user.err kernel: bbswitch: No discrete VGA device found
Jan  2 09:00:07 (none) user.info kernel: usb 2-1: New USB device found, idVendor=15d9, idProduct=0a4f
Jan  2 09:00:07 (none) user.info kernel: usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
Jan  2 09:00:07 (none) user.info kernel: usb 2-1: Product:  USB OPTICAL MOUSE
Jan  2 09:00:07 (none) user.info kernel: input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:0f.4/usb2/2-1/2-1:1.0/0003:15D9:0A4F.0001/input/input5
Jan  2 09:00:07 (none) user.info kernel: hid-generic 0003:15D9:0A4F.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:0f.4-1/input0
Jan  2 09:00:07 (none) user.info kernel: tsc: Refined TSC clocksource calibration: 498.619 MHz
Jan  2 09:00:07 (none) user.info kernel: clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xe5fe5e9335, max_idle_ns: 881590418043 ns
Jan  2 09:00:07 (none) user.info kernel: clocksource: Switched to clocksource tsc
Jan  2 09:00:07 (none) user.info kernel: uvesafb: Elpin Systems VGA BIOS, GEODE LX, Version 6.12, OEM: Advanced Micro Devices, VBE v2.0
Jan  2 09:00:07 (none) user.info kernel: uvesafb: protected mode interface info at c000:6dde
Jan  2 09:00:07 (none) user.info kernel: uvesafb: pmi: set display start = 780c6e05, set palette = 780c6eb1
Jan  2 09:00:07 (none) user.info kernel: uvesafb: pmi: ports = b4c3 b503 ba03 c003 c103 c403 c503 c603 c703 c803 c903 cc03 ce03 cf03 d403 d503 da03 1c03 1dac 1eac 1fac ffac
Jan  2 09:00:07 (none) user.info kernel: uvesafb: no monitor limits have been set, default refresh rate will be used
Jan  2 09:00:07 (none) user.info kernel: uvesafb: scrolling: ypan using protected mode interface, yres_virtual=5242
Jan  2 09:00:07 (none) user.info kernel: usb 2-2: new low-speed USB device number 3 using ohci-pci
Jan  2 09:00:07 (none) user.info kernel: Console: switching to colour frame buffer device 100x37
Jan  2 09:00:07 (none) user.info kernel: usb 2-2: New USB device found, idVendor=046d, idProduct=c31c
Jan  2 09:00:07 (none) user.info kernel: usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Jan  2 09:00:07 (none) user.info kernel: usb 2-2: Product: USB Keyboard
Jan  2 09:00:07 (none) user.info kernel: usb 2-2: Manufacturer: Logitech
Jan  2 09:00:07 (none) user.info kernel: input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:0f.4/usb2/2-2/2-2:1.0/0003:046D:C31C.0002/input/input6
Jan  2 09:00:07 (none) user.info kernel: uvesafb: framebuffer at 0xec000000, mapped to 0x97c00000, using 16384k, total 16384k
Jan  2 09:00:07 (none) user.info kernel: uvesafb: fb0: VESA VGA frame buffer device
Jan  2 09:00:07 (none) user.info kernel: hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:0f.4-2/input0
Jan  2 09:00:07 (none) user.info kernel: input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:0f.4/usb2/2-2/2-2:1.1/0003:046D:C31C.0003/input/input7
Jan  2 09:00:07 (none) user.info kernel: hid-generic 0003:046D:C31C.0003: input,hidraw2: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:0f.4-2/input1
Jan  2 09:00:08 (none) user.info kernel: usb 1-3: new high-speed USB device number 4 using ehci-pci
Jan  2 09:00:08 (none) user.info kernel: usb 1-3: New USB device found, idVendor=0951, idProduct=1665
Jan  2 09:00:08 (none) user.info kernel: usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jan  2 09:00:08 (none) user.info kernel: usb 1-3: Product: DataTraveler 2.0
Jan  2 09:00:08 (none) user.info kernel: usb 1-3: Manufacturer: Kingston
Jan  2 09:00:08 (none) user.info kernel: usb 1-3: SerialNumber: 6CF049E31FDEF290B9050CF6
Jan  2 09:00:09 (none) user.notice kernel: SCSI subsystem initialized
Jan  2 09:00:09 (none) user.warn kernel: ACPI Warning: SystemIO range 0x0000000000006100-0x00000000000061FF conflicts with OpRegion 0x0000000000006100-0x00000000000061FF (\_SB.GPIO) (20170728/utaddress-247)
Jan  2 09:00:09 (none) user.info kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Jan  2 09:00:09 (none) user.err kernel: cs5535-mfd 0000:00:0f.0: MFD add devices failed: -16
Jan  2 09:00:09 (none) user.warn kernel: cs5535-mfd: probe of 0000:00:0f.0 failed with error -16
Jan  2 09:00:10 (none) user.info kernel: parport_pc 00:04: reported by Plug and Play ACPI
Jan  2 09:00:10 (none) user.info kernel: input: PC Speaker as /devices/platform/pcspkr/input/input8
Jan  2 09:00:10 (none) user.info kernel: 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
Jan  2 09:00:10 (none) user.info kernel: 8139cp 0000:00:0d.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
Jan  2 09:00:10 (none) user.info kernel: usb-storage 1-3:1.0: USB Mass Storage device detected
Jan  2 09:00:10 (none) user.info kernel: scsi host0: usb-storage 1-3:1.0
Jan  2 09:00:10 (none) user.info kernel: usbcore: registered new interface driver usb-storage
Jan  2 09:00:10 (none) user.info kernel: 8139too: 8139too Fast Ethernet driver 0.9.28
Jan  2 09:00:10 (none) user.warn kernel: ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
Jan  2 09:00:10 (none) user.info kernel: 8139too 0000:00:0d.0 eth0: RealTek RTL8139 at 0x977d4000, 00:1a:a9:e6:41:b6, IRQ 11
Jan  2 09:00:10 (none) user.info kernel: usbcore: registered new interface driver uas
Jan  2 09:00:10 (none) user.debug kernel: libata version 3.00 loaded.
Jan  2 09:00:11 (none) user.debug kernel: pata_amd 0000:00:0f.2: version 0.4.1
Jan  2 09:00:11 (none) user.info kernel: scsi host1: pata_amd
Jan  2 09:00:11 (none) user.info kernel: scsi host2: pata_amd
Jan  2 09:00:11 (none) user.info kernel: ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
Jan  2 09:00:11 (none) user.info kernel: ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
Jan  2 09:00:11 (none) user.info kernel: ata1.00: ATA-0: DML344I3-512-S1-1, 30/06/03, max MWDMA2
Jan  2 09:00:11 (none) user.info kernel: ata1.00: 1024128 sectors, multi 0: LBA 
Jan  2 09:00:11 (none) user.info kernel: ata1.00: configured for MWDMA2
Jan  2 09:00:11 (none) user.notice kernel: scsi 1:0:0:0: Direct-Access     ATA      DML344I3-512-S1- 6/03 PQ: 0 ANSI: 5
Jan  2 09:00:11 (none) user.debug kernel: ata2: port disabled--ignoring
Jan  2 09:00:11 (none) user.notice kernel: scsi 0:0:0:0: Direct-Access     Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 4
Jan  2 09:00:11 (none) user.notice kernel: sd 1:0:0:0: [sda] 1024128 512-byte logical blocks: (524 MB/500 MiB)
Jan  2 09:00:11 (none) user.notice kernel: sd 1:0:0:0: [sda] Write Protect is off
Jan  2 09:00:11 (none) user.debug kernel: sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
Jan  2 09:00:11 (none) user.notice kernel: sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
Jan  2 09:00:11 (none) user.notice kernel: sd 0:0:0:0: [sdb] 30233588 512-byte logical blocks: (15.5 GB/14.4 GiB)
Jan  2 09:00:11 (none) user.info kernel:  sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sda4
Jan  2 09:00:11 (none) user.notice kernel: sd 0:0:0:0: [sdb] Write Protect is off
Jan  2 09:00:11 (none) user.debug kernel: sd 0:0:0:0: [sdb] Mode Sense: 45 00 00 00
Jan  2 09:00:11 (none) user.notice kernel: sd 0:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
Jan  2 09:00:11 (none) user.info kernel:  sdb: sdb1
Jan  2 09:00:11 (none) user.notice kernel: sd 1:0:0:0: [sda] Attached SCSI disk
Jan  2 09:00:11 (none) user.notice kernel: sd 0:0:0:0: [sdb] Attached SCSI removable disk
Jan  2 09:00:11 (none) user.warn kernel: NOHZ: local_softirq_pending 202
Jan  2 09:00:11 (none) user.warn kernel: NOHZ: local_softirq_pending 10
Jan  2 09:00:11 (none) user.warn kernel: NOHZ: local_softirq_pending 40
Jan  2 09:00:11 (none) user.warn kernel: NOHZ: local_softirq_pending 40
Jan  2 09:00:11 (none) user.warn kernel: NOHZ: local_softirq_pending 40
Jan  2 09:00:11 (none) user.warn kernel: NOHZ: local_softirq_pending 40
Jan  2 09:00:11 (none) user.warn kernel: NOHZ: local_softirq_pending 40
Jan  2 09:00:11 (none) user.warn kernel: NOHZ: local_softirq_pending 40
Jan  2 09:00:11 (none) user.warn kernel: NOHZ: local_softirq_pending 10
Jan  2 09:00:12 (none) user.info kernel: 8139too 0000:00:0d.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1
Jan  2 09:00:13 (none) user.warn kernel: NOHZ: local_softirq_pending 08
Jan  2 09:00:13 (none) daemon.info rngd[409]: rngd 2-unofficial-mt.14 starting up...
Jan  2 09:00:13 (none) daemon.info rngd[409]: entropy feed to the kernel ready
Jan  2 09:00:16 (none) daemon.info acpid: starting up with netlink and the input layer
Jan  2 09:00:16 (none) daemon.info acpid: 6 rules loaded
Jan  2 09:00:16 (none) daemon.info acpid: waiting for events: event logging is off
Jan  2 09:00:16 (none) cron.info crond[903]: crond (busybox 1.23.1) started, log level 8
Jan  2 09:00:16 (none) authpriv.info dropbear[960]: Running in background
Jan  2 09:00:17 (none) daemon.info init: starting pid 1283, tty '/dev/tty1': '-/sbin/agetty -c --noclear --nohints --noissue --nohostname -a root tty1 115200 linux'
Jan  2 09:00:17 (none) auth.info login[1290]: root login on 'tty1'
Jan  2 09:00:39 (none) authpriv.info dropbear[1352]: Child connection from 192.168.100.163:52160
Jan  2 09:00:41 (none) authpriv.warn dropbear[1352]: Pubkey auth attempt with unknown algo for 'root' from 192.168.100.163:52160
Jan  2 09:00:44 (none) authpriv.notice dropbear[1352]: Password auth succeeded for 'root' from 192.168.100.163:52160
Jan  2 09:00:44 (none) authpriv.warn dropbear[1353]: lastlog_perform_login: Couldn't stat /var/log/lastlog: No such file or directory
Jan  2 09:00:44 (none) authpriv.warn dropbear[1353]: lastlog_openseek: /var/log/lastlog is not a file or directory!
AlexanderZhirov commented 2 years ago

And how can I manually, after downloading the MINIMAL image, download the allfirmware package from the mounted device separately?

Doncuppjr commented 2 years ago

You can’t. It’s needed during udev, but if it is missing, you should get reports in /car/log/messages

AlexanderZhirov commented 2 years ago

When I build a minimal build on IceWM, without extra packages, then everything loads and works. But there is a problem with graphics, it slows down a little. And to understand if all the necessary firmware is installed - there is no way, since I do not know which ones should be installed. And it is impossible to analyze the system, because it just freezes. Apparently, too much firmware can't load. I have even installed the distribution on the hard disk from the Live image and connected it to the computer, but it also hangs on the download. I don't understand what he's missing.

изображение

изображение

AlexanderZhirov commented 2 years ago

How ELSE can I analyze the system to understand what firmware and drivers are needed for this PC?

Thinstation commented 2 years ago

Firmware messages will show up in /var/log/firmware. I don't see any, so the machine does not need any firmware.

Thinstation commented 2 years ago

sorry, /var/log/messages not firmware.

AlexanderZhirov commented 2 years ago

The video slows down very much, both in RDP and in the distribution itself. It feels like there is a problem with the drivers.

Thinstation commented 2 years ago

The geode does not have an accelerated driver. It's framebuffer only. You will never get good performance out of that machine. But hey, you made it work. Congrats.

Thinstation commented 2 years ago

Maybe you can compile this driver. https://www.x.org/wiki/GeodeDriver/

AlexanderZhirov commented 2 years ago

Maybe you can compile this driver. https://www.x.org/wiki/GeodeDriver/

I'll try to assemble it now. I'll write a little later what happens :wink:

Thinstation commented 2 years ago

I pushed to 5.6-Stable.

Thinstation commented 2 years ago

Might need to add iomem=relaxed to the kernelcmdline

AlexanderZhirov commented 2 years ago

It's just amazing! It really works better with this driver! Considering that the frequency is ~500 Megahertz, this is just a great result! Thank you very much! :smiley: