search

ThisIsNotRocketScience / GerberTools

Tools to load/edit/create/panelizer sets of gerber files
MIT License
725 stars 144 forks source link

Additional Milling added (makes a triangle from an curved line) #103

Closed ranseyer closed 4 years ago

ranseyer commented 4 years ago

The gerbertools add an additional line from the beginning bi to the end of the line to a curved milling. The original line has a width of 50 mil, and the added line (width 0mil) creates an area similar to a triangle.

I woul be happy abou an help or an hint...

merged-defect.zip

G1_Combined_Top

Original-Gerber-HM-Relais4-flach-v01-034-eagle7.zip

StijnKuipers commented 4 years ago

Could you also post the original file? Can't say much about the error on the combined file alone.

On Fri, Feb 7, 2020 at 7:26 PM ranseyer notifications@github.com wrote:

The gerbertools add an additional line from the beginning bi to the end of the line to a curved milling. The original line has a width of 50 mil, and the added line (width 0mil) creates an area similar to a triangle.

I woul be happy abou an help or an hint...

merged-defect.zip https://github.com/ThisIsNotRocketScience/GerberTools/files/4172315/merged-defect.zip

[image: G1_Combined_Top] https://user-images.githubusercontent.com/3889328/74055033-7b191f00-49df-11ea-87e9-70bae8d7235c.png

Original-Gerber-HM-Relais4-flach-v01-034-eagle7.zip https://github.com/ThisIsNotRocketScience/GerberTools/files/4172324/Original-Gerber-HM-Relais4-flach-v01-034-eagle7.zip

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/ThisIsNotRocketScience/GerberTools/issues/103?email_source=notifications&email_token=AABSI6IMAUOW4BXVVCBI2GLRBWRW7A5CNFSM4KRS4U5KYY3PNVWWK3TUL52HS4DFUVEXG43VMWVGG33NNVSW45C7NFSM4IL4MHNQ, or unsubscribe https://github.com/notifications/unsubscribe-auth/AABSI6P2WCJUH6K6ILYMDPTRBWRW7ANCNFSM4KRS4U5A .

ranseyer commented 4 years ago

Yes, it is attached above as: Original-Gerber-HM-Relais4-flach-v01-034-eagle7.zip

ranseyer commented 4 years ago

I can attach it again if needed.

StijnKuipers commented 4 years ago

Oh right - github mail only showed 1 of 2 links

StijnKuipers commented 4 years ago

Your GML file has a random unclosed line in the middle - fix that in your eagle file and reexport.

StijnKuipers commented 4 years ago

image

ranseyer commented 4 years ago

Hmm, this is on the milling layer.

In the past i ordered exactly in this way PCBs and the producers milled it exactly as wide as in eagle designed.

But i learned the i can redraw this with an line wideness of 0mil ... Thanks for the feedback !

StijnKuipers commented 4 years ago

a lot of boardhouses have teams of people manually fixing boards without telling you about this... "magic happens"

These gerber tools dont have the luxury of interpretation :-(

On Tue, Feb 18, 2020 at 10:24 PM ranseyer notifications@github.com wrote:

Hmm, this is on the milling layer.

In the past i ordered exactly in this way PCBs and the producers milled it exactly as wide as in eagle designed.

But i learned the i can redraw this with an line wideness of 0mil ... Thanks for the feedback !

— You are receiving this because you modified the open/close state. Reply to this email directly, view it on GitHub https://github.com/ThisIsNotRocketScience/GerberTools/issues/103?email_source=notifications&email_token=AABSI6MQQDAALEHI2ICMJ6DRDRGXDA5CNFSM4KRS4U5KYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEMFD37A#issuecomment-587873788, or unsubscribe https://github.com/notifications/unsubscribe-auth/AABSI6N6BBNAW5BSX6J2MATRDRGXDANCNFSM4KRS4U5A .