Possibility to read load per phase?

[Fewk1]

Thank you for a great app, easy to install and running smoothly. I wonder if it would be possible to get more data from the smart meter. Specifically I would be interested in read load per phase in order to balance the load to a charging box. The loads are displayed on the smart meter itself, but I cannot get the readings to the other units in the system.

Best /Fredrik

[ThomasHoussin]

Hi. Yes I think I can add that ; would current per phase be enough ?

[Fewk1]

Yes, current per phase would be perfect.

Thank you

/Fredrik

[ThomasHoussin]

Hi. Can you try the test version : https://homey.app/a/com.thomashoussin.fronius/test/

I added a setting (in advanced settings) to activate 3-phase visibility, I think it should work.

[Fewk1]

Thank you Thomas,

It seems to work fine, I get readouts that correspond to the numbers on the smart meter display. I see that you have also added flow triggers for each👍🏻 My only suggestion would be to assign different names to the phases, since they now all have the same name, see screen image below. Ström is current in Swedish. I would suggest Ström L1, etc.

Again thanks for fixing this so rapidly. Kudos!

/Fredrik

26 jan. 2022 kl. 17:30 skrev Thomas Houssin @.***>:

 Hi. Can you try the test version : https://homey.app/a/com.thomashoussin.fronius/test/

I added a setting (in advanced settings) to activate 3-phase visibility, I think it should work.

— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you authored the thread.

[ThomasHoussin]

I forgot that, it fixed it in new test version.

[Fewk1]

Thanks again works like a charm!

Best regards /Fredrik

26 jan. 2022 kl. 19:36 skrev Thomas Houssin @.***>:

 I forgot that, it fixed it in new test version.

— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you authored the thread.