Open yboujraf opened 3 years ago
Hi,
Yes it is TSL v5.0 and packets are sent via UDP. You can use RH Tally and LH Tally (Text Tally aren't used). Only RH Tally are sent to the camera (if you choose it in "Paramètres" window) and if you send both to the software, RH Tally wins. So RH Tally is PGM Tally (Red) and LH Tally is PVW Tally (Green).
Best Regards,
Dear @ThomasPaillet
Thank you for the feedback. Actually I am sending the RH or LH Tally but not Tally from the Camera.
The software version in the camera is the V2.78 the latest.
This is the MENU :
Which version of software are you using and maybe there is another MENU to enable the TSL.
Thanks if you could help
Best regards
It's due to a misunderstanding, sorry it's my fault i don't wrote documentation yet :-).
It's the software who receive TSL v5.0 information and if needed, it put the tally light of the cameras on or off via Panasonic protocol. The software doesn't send TSL information to the cameras (the AW-HE130 cameras don't have this feature).
Best regards
Dear @ThomasPaillet
Thank you for your feedback.
From latest version, Panasonic supported the TSL 5.0 protocol in UDP for RED and GREEN tally but unfortunately it doesn't work.
Maybe if you have the time to test the Tally will be great.
Best regards
Dear, @ThomasPaillet
I have the Panasonic AW-UE150 with the latest version 2.78.
I try to enable and send the TSL5.0 tally information without success.
Are you using TSL5.0 👍🏽
Best Regards,