search

ThomasToka / MarlinFirmware

This is [MARLIN-E3S1PROFORK-BYTT]. A Fork of Marlin 2.1.x-bugfix with the Creality Ender 3 S1 Pro source code included. Personal tweaks, fixes and enhancements included. This firmware is for the Ender 3 S1 Pro (touchscreen) and Ender 3 S1 Plus (touchscreen).
231 stars 8 forks source link

changing filament #36

Closed Romarioo7 closed 11 months ago

Romarioo7 commented 11 months ago

Hello my friend! thanks for the firmware. I can't seem to print with changing colors in the slicer. Tell me how to properly configure the slicer to pause and replace the filament. Thank you in advance!

ThomasToka commented 11 months ago

Hello, this is a "issue" reporting system for reporting problems with the firmware.

This a not a support channel for basic printing/feature questions.

Please use the channels on the discord for such questions.

To you question:

a) you can use M600 filament change:

grafik

b) you can use M0 "pause at height"

https://github.com/ThomasToka/MarlinFirmware/wiki/Pause-at-height-(M0)

ar360yandexru commented 11 months ago

Good afternoon, can you add the option to change the filament next to the pause button. For example, I paused -> pressed the "change filament" button-> drove off to the XY parking place -> replaced the filament -> squeezed out 100mm of filament so that the replacement took place -> removed it carefully with my hand -> pressed the button -> continued printing.

Also, this algorithm can be applied as soon as the filament motion sensor is triggered

Thank you very much from Russia, Samara.