search

ThomasVon2021 / blikvm

Open and cost-effective "KVM-over-IP". BliKVM comes in 4 different models, v1 CM4, v2 PCIe, v3 HAT and v4 Allwinner, based on Raspberry Pi and Allwinner SoC.
https://thomasvon2021.github.io/blikvm/
GNU General Public License v3.0
386 stars 35 forks source link

Blikvm not boot to OS : #154

Closed irish1986 closed 6 months ago

irish1986 commented 6 months ago

I am unable to get my blikvm v3 HAT to work. I have tried both version of the OS and it always fails (get stuck here). I tried this RPi4 ith Ubuntu server and it booted well. Any suggestion ?

image

m50S79sM6SRNp8Jn commented 6 months ago

Can you elaborate on the two versions, which versions specifically?

m50S79sM6SRNp8Jn commented 6 months ago

How you tried reflashing the SD card?

irish1986 commented 6 months ago

I am using a USB key instead of SD card (not sure if this could be the issue). I got this RPi4 and HAT working a few months ago but decided to do a clean install to document better the steps for my lab. I am fairly certain I used a USB device since that how I boot all my RPi4.

I use both version : blikvm-v1-v2-v3-20230924 and blikvm-v1-v2-v3-20231203

m50S79sM6SRNp8Jn commented 6 months ago

Can you try with SD card, use the latest image.

ThomasVon2021 commented 6 months ago

I am using a USB key instead of SD card (not sure if this could be the issue). I got this RPi4 and HAT working a few months ago but decided to do a clean install to document better the steps for my lab. I am fairly certain I used a USB device since that how I boot all my RPi4.

I use both version : blikvm-v1-v2-v3-20230924 and blikvm-v1-v2-v3-20231203

The SD card startup is not related to the hat itself, but only depends on the pi4b and SD card

ThomasVon2021 commented 6 months ago

If it has not been resolved yet, please open this issue again. And provide more information.