search

ThomasVon2021 / blikvm

Open and cost-effective "KVM-over-IP". BliKVM comes in 4 different models, v1 CM4, v2 PCIe, v3 HAT and v4 Allwinner, based on Raspberry Pi and Allwinner SoC.
https://thomasvon2021.github.io/blikvm/
GNU General Public License v3.0
407 stars 38 forks source link

No web interface on Blikvm v4 #177

Closed singspeal1 closed 3 months ago

singspeal1 commented 3 months ago

Hi Support,

I can ping the device but when I put ip address on google chrome. It doesn't show up anything.

Tks Kevin

ThomasVon2021 commented 3 months ago

use http not https

singspeal1 commented 3 months ago

I am not using https. Even I can't telnet ipaddress:80 but I can telnet ipaddress:8008

ThomasVon2021 commented 3 months ago

Can you use console port to debug https://wiki.blicube.com/blikvm/en/BliKVM-v4-guide/#serial-console-access-via-the-5v-port

ps -aux | grep link

kvm-link is the web soft.

singspeal1 commented 3 months ago

I can use putty to access the device.

singspeal1 commented 3 months ago

Capture

singspeal1 commented 3 months ago

Capture

singspeal1 commented 3 months ago

Can you use console port to debug https://wiki.blicube.com/blikvm/en/BliKVM-v4-guide/#serial-console-access-via-the-5v-port

ps -aux | grep link

kvm-link is the web soft.

sorry I quite dont' get your point. Please advice

ThomasVon2021 commented 3 months ago 
systemctl status kvmd-web
ThomasVon2021 commented 3 months ago

https://github.com/ThomasVon2021/blikvm/tree/master/package/kvmd-web

kvm-link is the web process，If this program doesn't start, it definitely won't be able to open the website. First, check the status to see if you can find the reason for the startup failure. I think flashing the system should be able to restore it.

singspeal1 commented 3 months ago

Capture

singspeal1 commented 3 months ago

Please instruct me how to restore it

ThomasVon2021 commented 3 months ago

https://wiki.blicube.com/blikvm/en/flashing_os/

singspeal1 commented 3 months ago

do u have video to guide to do it step by step. I dont' feel comfortable to do it without very clear guideline BTW, how can I do 1 to 1 replacement?

ThomasVon2021 commented 3 months ago

There is no video, the problem is very clear. The kvm-link is damaged. You can skip flashing the system and download the latest package of kvm link from GitHub release. Then replace the kvm link program under/usr/bin/blikvm, and restart it to restore normal operation. https://github.com/ThomasVon2021/blikvm/releases

ThomasVon2021 commented 3 months ago

There should be no problem with the hardware, just replace the software. Please don't worry too much. If it is not fixed in the end, you can return it for a replacement. Please feel free to try it out.

ThomasVon2021 commented 3 months ago

or you can join discord, uncertain steps can be communicated in a timely manner

singspeal1 commented 3 months ago

First of all, I am not familiar with linux. Secondly, I am not expect to buy something that I need to do so much to run a device. Thirdly, your instruction is not clear enough. You just send the link but I need to find out how can I install it.

singspeal1 commented 3 months ago

Capture which version that I need to download

ThomasVon2021 commented 3 months ago

Can you join Discord? I can send it directly to you in discord, but communication here is too slow. the release-h616-v4.tar.gz, After decompression, there is a kvm-link program inside, just replace it with kvm-ink in/usr/bin/blikvm.

singspeal1 commented 3 months ago

I joned Discord. My user name is singspeal1