Open GoogleCodeExporter opened 9 years ago
Did you try pushing the Reset button on your board just before uploading? It
resets th e microcontroller so it can respond to the programmer without all
those interrupts and everything that kept it in a "trap".
I had to do this all the time when I used the arduino bluetooth board.
Original comment by mw.mzp...@gmail.com
on 27 Apr 2011 at 12:23
Yes, but it didn't take any effect.
Original comment by Atalantt...@gmail.com
on 27 Apr 2011 at 6:04
After 1 year, I am having the same problem. If someone managed to solve this
problem it would be great that they put the solution online!
Ubuntu 12.04, Arduino 1.0.1 IDE AND Arduino 1.0 IDE, the board is Arduino pro
mini 5V ATmega 328
Original comment by ningun...@gmail.com
on 31 Oct 2012 at 1:17
same problem here.
MacOS X, Arduino 1.0.3 IDE, board Arduino pro mini 328 3.3V 8MHz.
The problem was supposed to be fixed in the Arduino 1.0.1 IDE version, but
unfortunately it is not.
http://arduino.cc/en/Main/ReleaseNotes
Original comment by christia...@gmail.com
on 8 Jan 2013 at 9:30
Same issue.
Board MEGA2560 and cabling work and can be programmed on my Win7 but not on OSX
10.8.5.
Release: Arduino Alpha 0019 on OSX.
Problem: unable to program any sketch (any any any)
Debug:
Binary sketch size: 3408 bytes (of a 126976 byte maximum)
/Applications/Arduino.app/Contents/Resources/Java/hardware/tools/avr/bin/avrdude
-C/Applications/Arduino.app/Contents/Resources/Java/hardware/tools/avr/etc/avrdu
de.conf -v -v -v -v -patmega1280 -cstk500v1 -P/dev/tty.usbmodem1a21 -b57600 -D
-Uflash:w:/var/folders/10/6xkj8b_d18lccb0rqbsf65q40000gn/T/build1605839061460943
672.tmp/AnalogReadSerial.cpp.hex:i
avrdude: Version 5.4-arduino, compiled on Oct 9 2007 at 11:20:31
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
System wide configuration file is "/Applications/Arduino.app/Contents/Resources/Java/hardware/tools/avr/etc/avrdude.conf"
User configuration file is "/Users/Miguel/.avrduderc"
User configuration file does not exist or is not a regular file, skipping
Using Port : /dev/tty.usbmodem1a21
Using Programmer : stk500v1
Overriding Baud Rate : 57600
avrdude: Send: 0 [30] [20]
avrdude: Send: 0 [30] [20]
avrdude: Send: 0 [30] [20]
avrdude: ser_recv(): programmer is not responding
avrdude: stk500_recv(): programmer is not responding
avrdude: Send: Q [51] [20]
avrdude: ser_recv(): programmer is not responding
avrdude: stk500_recv(): programmer is not responding
Original comment by miguel.m...@gmail.com
on 7 Jan 2014 at 11:22
You have to press reset just before the: avrdude: Send: 0 [30] [20]
Apparently the handshaking is messed up and this is a workaround, see:
hxxps://stackoverflow.com/questions/19765037/arduino-sketch-upload-issue-avrdude
-stk500-recv-programmer-is-not-respondi
Haven't found the actual problem so living with the reset workaround atm
Original comment by simonmin...@gmail.com
on 16 May 2014 at 12:54
If someone is still having this problem, I solved it adding a switch between
Aduino GND and Programer GND. Just before avrdude sends the first three
packets, push the switch to turn on the Arduino. Try to get the shorter time
between this events. It is a little tricky but it works for me.
Original comment by sopo...@actimediaonline.com
on 8 Jul 2014 at 10:56
Original issue reported on code.google.com by
Atalantt...@gmail.com
on 25 Apr 2011 at 2:40