3D print solder paste holder pieces for +60 demo

FlyingLotus1983 commented 9 years ago

I thought that we had these pieces on-hand but I was mistaken, we need to print them.

We will either need to:

(A) find a 10cc paste syringe adapter and tubing, or
(B) Adjust the 3D printed pieces to use a 5 cc syringe. Find a Luer male-to-male adapter, and buy some paste in a 10cc size, and transfer to a few 5cc tubes.

I'm going to the market tomorrow to see which of these two things that I can find.

Tagging myself on this issue until I have the parts in my hand tomorrow. After which, I will assign to @WillD77 to actually do the re-design and 3D printing.

I'm also starting on a 5cc syringe model in Cubify now, based off of the 10cc version. Will check both into the fpd-sandbox repo when complete.

FlyingLotus1983 commented 9 years ago

I drew the 5cc syringe and checked it in:

https://github.com/TinWhiskers/fpd-mechanical-sandbox/blob/master/Neil/VLS5CC%20-%20Luer%20lock%205cc%20syringe.AD_PRT

WillD77 commented 9 years ago

Used the 5cc syringe to redesign the 3d printed parts. They are currently printing.

FlyingLotus1983 commented 9 years ago

Pieces have been printed, and have been assembled, and handed over to Jason.

Closing #32.

TinWhiskers / fpd-design

3D print solder paste holder pieces for +60 demo #32