Decrease bore size by fraction of a mm on 608 bearing block bearing bore

TinWhiskers / fpd-design

Design document for FirePick Delta

1 stars 0 forks source link

Closed FlyingLotus1983 closed 9 years ago

FlyingLotus1983 commented 9 years ago

Bearings are a little bit loose in our new CNC'd bearing blocks. Decrease by just a teeny tiny bit, TBD amount.

WillD77 commented 9 years ago

And, just how precise is this "teeny tiny" bit?

FlyingLotus1983 commented 9 years ago

Can you make it 0.03 millimeters smaller? That works out to 1.5 thousandths of an inch, give or take.

WillD77 commented 9 years ago

Bore diameter changed from 21.99 to 21.96. Drawings updated as well. Tolerance left at -0.0, + 0.015.

FlyingLotus1983 commented 9 years ago

OK, closing the issue. Thanks @WillD77