search

TomWhitwell / RadioMusic

Virtual Radio module for Eurorack
328 stars 91 forks source link

LED's are looping, then clicking and beeping sound (with or without SD card) #146

Open hallundrauch opened 6 years ago

hallundrauch commented 6 years ago

Hey all,

I finished Radio Music today and have a similar Issue as electrojoeuk in Issue#140, but a bit different:

Turning RM on, all Leds are blinking one after another (ca 3 sec / led), then theres a clicking&hi-freq beeping sound sound and it starts from the beginning. When I put the SD card in it is the same just much more faster (one "loop/beep" in a second).

Checked all parts, the voltages (+12,-12, +5), teensy is working fine standalone with blinking test hex files. Installed the Radio_Music_2017.2.hex firmware.

So unfortunately this module never worked so far and I have no clue. Is the IC damaged maybe?

Best, Benjamin

Thonk-Steve commented 6 years ago

Hi Benjamin, this sounds like what happens when the card isn't formatted correctly, did you follow these instructions for the folder structure etc? https://github.com/TomWhitwell/RadioMusic/wiki/SD-Card%3A-Format-%26-File-Structure

On Wed, Jul 11, 2018 at 4:24 PM, hallundrauch notifications@github.com wrote:

Hey all,

I finished Radio Music today and have a similar Issue as electrojoeuk in Issue#140, but a bit different:

Turning RM on, all Leds are blinking one after another (ca 3 sec / led), then theres a clicking&hi-freq beeping sound sound and it starts from the beginning. When I put the SD card in it is the same just much more faster (one "loop/beep" in a second).

Checked all parts, the voltages (+12,-12, +5), teensy is working fine standalone with blinking test hex files. Installed the Radio_Music_2017.2.hex firmware.

So unfortunately this module never worked so far and I have no clue. Is the IC damaged maybe?

Best, Benjamin

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/TomWhitwell/RadioMusic/issues/146, or mute the thread https://github.com/notifications/unsubscribe-auth/ABVz-NvzwMH66vAVfpXI8QquRaPnN9wbks5uFhiugaJpZM4VLWty .

hallundrauch commented 6 years ago

Thanks so much for the quick response. Was sure I formatted the right way, but seems I was wrong, re-formatted and the first sample is playing!

Thanks!!!

Am 11.07.2018 um 17:26 schrieb Thonk-Steve notifications@github.com<mailto:notifications@github.com>:

Hi Benjamin, this sounds like what happens when the card isn't formatted correctly, did you follow these instructions for the folder structure etc? https://github.com/TomWhitwell/RadioMusic/wiki/SD-Card%3A-Format-%26-File-Structure

On Wed, Jul 11, 2018 at 4:24 PM, hallundrauch notifications@github.com<mailto:notifications@github.com> wrote:

Hey all,

I finished Radio Music today and have a similar Issue as electrojoeuk in Issue#140, but a bit different:

Turning RM on, all Leds are blinking one after another (ca 3 sec / led), then theres a clicking&hi-freq beeping sound sound and it starts from the beginning. When I put the SD card in it is the same just much more faster (one "loop/beep" in a second).

Checked all parts, the voltages (+12,-12, +5), teensy is working fine standalone with blinking test hex files. Installed the Radio_Music_2017.2.hex firmware.

So unfortunately this module never worked so far and I have no clue. Is the IC damaged maybe?

Best, Benjamin

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/TomWhitwell/RadioMusic/issues/146, or mute the thread https://github.com/notifications/unsubscribe-auth/ABVz-NvzwMH66vAVfpXI8QquRaPnN9wbks5uFhiugaJpZM4VLWty .

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/TomWhitwell/RadioMusic/issues/146#issuecomment-404210896, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AnNwnPKPO2ZtQMzqZOFIxiBJ3Th2y45pks5uFhkngaJpZM4VLWty.

Thonk-Steve commented 6 years ago

perfect!

On Wed, Jul 11, 2018 at 4:34 PM, hallundrauch notifications@github.com wrote:

Thanks so much for the quick response. Was sure I formatted the right way, but seems I was wrong, re-formatted and the first sample is playing!

Thanks!!!

Am 11.07.2018 um 17:26 schrieb Thonk-Steve <notifications@github.com< mailto:notifications@github.com>>:

Hi Benjamin, this sounds like what happens when the card isn't formatted correctly, did you follow these instructions for the folder structure etc? https://github.com/TomWhitwell/RadioMusic/wiki/SD-Card%3A-Format-%26-File- Structure

On Wed, Jul 11, 2018 at 4:24 PM, hallundrauch <notifications@github.com< mailto:notifications@github.com>> wrote:

Hey all,

I finished Radio Music today and have a similar Issue as electrojoeuk in Issue#140, but a bit different:

Turning RM on, all Leds are blinking one after another (ca 3 sec / led), then theres a clicking&hi-freq beeping sound sound and it starts from the beginning. When I put the SD card in it is the same just much more faster (one "loop/beep" in a second).

Checked all parts, the voltages (+12,-12, +5), teensy is working fine standalone with blinking test hex files. Installed the Radio_Music_2017.2.hex firmware.

So unfortunately this module never worked so far and I have no clue. Is the IC damaged maybe?

Best, Benjamin

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/TomWhitwell/RadioMusic/issues/146, or mute the thread https://github.com/notifications/unsubscribe-auth/ABVz- NvzwMH66vAVfpXI8QquRaPnN9wbks5uFhiugaJpZM4VLWty .

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/ TomWhitwell/RadioMusic/issues/146#issuecomment-404210896, or mute the threadhttps://github.com/notifications/unsubscribe-auth/ AnNwnPKPO2ZtQMzqZOFIxiBJ3Th2y45pks5uFhkngaJpZM4VLWty.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/TomWhitwell/RadioMusic/issues/146#issuecomment-404213785, or mute the thread https://github.com/notifications/unsubscribe-auth/ABVz-EIoKzyIzGbwRoxw0pBOAIE0gv31ks5uFhsCgaJpZM4VLWty .

bassinfected commented 6 years ago

Hey, i have the same issue now. The module was running for half an year at least and now i wanted to change some samples. Since i replaced the samples it doesn´t work anymore and also keeps flashing etc. I tried to format the SD card by SanDisc 5x now but still the same result. It´s Mac OSX i am using but i set it to FAT every time. Any idea what to do?

TomWhitwell commented 6 years ago

Hi, sorry to hear that. Perhaps check the folder format on the card - it has to be arranged exactly as described here: https://github.com/TomWhitwell/RadioMusic/wiki/SD-Card%3A-Format-and-File-Structure

bassinfected commented 6 years ago

I also tried the prepared SD folders you had but they also don´t work. Updated the software too but it´s still the same issue.

Thonk-Steve commented 6 years ago

Can you post a screenshot of the root of your file/folder structure with hidden files visible?

On Mon, 20 Aug 2018, 11:35 bassinfected, notifications@github.com wrote:

I also tried the prepared SD folders you had but they also don´t work. Updated the software too but it´s still the same issue.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/TomWhitwell/RadioMusic/issues/146#issuecomment-414256876, or mute the thread https://github.com/notifications/unsubscribe-auth/ABVz-IRVlX2CnkL0DT3wpXo7NbNN_rU6ks5uSoLpgaJpZM4VLWty .

bassinfected commented 6 years ago

I tried the prepared one by you and a guy who postet a prepared card in a forum but.  

Gesendet: Montag, 20. August 2018 um 17:20 Uhr Von: Thonk-Steve notifications@github.com An: TomWhitwell/RadioMusic RadioMusic@noreply.github.com Cc: bassinfected m.kraemer3@web.de, Comment comment@noreply.github.com Betreff: Re: [TomWhitwell/RadioMusic] LED's are looping, then clicking and beeping sound (with or without SD card) (#146)

Can you post a screenshot of the root of your file/folder structure with hidden files visible?

On Mon, 20 Aug 2018, 11:35 bassinfected, notifications@github.com wrote:

I also tried the prepared SD folders you had but they also don´t work. Updated the software too but it´s still the same issue.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/TomWhitwell/RadioMusic/issues/146#issuecomment-414256876, or mute the thread https://github.com/notifications/unsubscribe-auth/ABVz-IRVlX2CnkL0DT3wpXo7NbNN_rU6ks5uSoLpgaJpZM4VLWty .

— You are receiving this because you commented. Reply to this email directly, view it on GitHub, or mute the thread.

Thonk-Steve commented 6 years ago

That's good but it would still be helpful to see what they look like now with hidden files turned on...

On Sat, 25 Aug 2018, 17:55 bassinfected, notifications@github.com wrote:

I tried the prepared one by you and a guy who postet a prepared card in a forum but.

Gesendet: Montag, 20. August 2018 um 17:20 Uhr Von: Thonk-Steve notifications@github.com An: TomWhitwell/RadioMusic RadioMusic@noreply.github.com Cc: bassinfected m.kraemer3@web.de, Comment comment@noreply.github.com Betreff: Re: [TomWhitwell/RadioMusic] LED's are looping, then clicking and beeping sound (with or without SD card) (#146)

Can you post a screenshot of the root of your file/folder structure with hidden files visible?

On Mon, 20 Aug 2018, 11:35 bassinfected, notifications@github.com wrote:

I also tried the prepared SD folders you had but they also don´t work. Updated the software too but it´s still the same issue.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub < https://github.com/TomWhitwell/RadioMusic/issues/146#issuecomment-414256876 , or mute the thread < https://github.com/notifications/unsubscribe-auth/ABVz-IRVlX2CnkL0DT3wpXo7NbNN_rU6ks5uSoLpgaJpZM4VLWty

.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub, or mute the thread.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/TomWhitwell/RadioMusic/issues/146#issuecomment-415982510, or mute the thread https://github.com/notifications/unsubscribe-auth/ABVz-CMYADkQDsgFd6ZlWRS5CAXqHWdkks5uUYGRgaJpZM4VLWty .