Open thesingingarc opened 2 years ago
Hey Chris,
One thought, did you get switch orientation correct with the flat line matched up on the silkscreen and the button?
Photos of both sides of both PCBs would help also 👍
Steve
On Sat, 23 Oct 2021, 22:21 thesingingarc, @.***> wrote:
Hello
Had a look through the issues and couldn't see anything specifically related.
Main PCB works (tested with my other radio music) so I'm 100% it's not that.
Control PCB. Built to spec and resistors tested on way in. LEDs work: reset triggers randomly and there's associated clicking noises.
Checked for bridges, nothing, good flow front and back, no cold joints and everything reflowed, diodes in the right way , button in the right way ...
Could the button be faulty ?
TIA! CHRIS
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/TomWhitwell/RadioMusic/issues/181, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAKXH6H5VAJNGKFIKF7R6CDUIMRNPANCNFSM5GSVPLRQ . Triage notifications on the go with GitHub Mobile for iOS https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675 or Android https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub.
Hi Steve
Please see attached. The only thing I can across during testing was that the 100k Rs in circuit were reading less than they should 70k, but put that down to being in circuit. Ive attached some images here of the control board as requested.
Hope that helps.
Hello
Had a look through the issues and couldn't see anything specifically related.
Main PCB works (tested with my other radio music) so I'm 100% it's not that.
Control PCB. Built to spec and resistors tested on way in. LEDs work: reset triggers randomly and there's associated clicking noises.
Checked for bridges, nothing, good flow front and back, no cold joints and everything reflowed, diodes in the right way , button in the right way ...
Could the button be faulty ?
TIA! CHRIS