Open MickGlossop opened 4 years ago
I've replaced both the 4015 chips and that seems to have solved the problem.
Hi Mick,
Glad you solved it and sorry no one responded yet! Summer holidays aplenty at Thonk and Music Thing.
Regards
Steve
On Fri, Aug 7, 2020 at 7:13 PM MickGlossop notifications@github.com wrote:
I've replaced both the 4015 chips and that seems to have solved the problem.
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/TomWhitwell/TuringMachine/issues/138#issuecomment-670644805, or unsubscribe https://github.com/notifications/unsubscribe-auth/AAKXH6B5EMEVNIDGC5PTEL3R7Q757ANCNFSM4PUQKUCQ .
No problem - we’re all entitled to some down time!
Cheers, Mick
Hi Tom - with the main knob in the centre position I'm not getting any randomisation. The TM behaves as if the knob is fully CCW (16 steps, or 32 with the switch UP), i.e. a constantly repeating series of CV voltages.
It's behaving as if the shift register is stuck. If I use the WRITE switch to clear the register, the CV output becomes constant as you would expect, but as soon as I release the WRITE switch, the CV output returns to the same sequence that was 'stuck' previously.
This behaviour is unaffected by un-plugging the backpack and Pluses/Voltages boards.
Where would you suggest I look - should I change a chip?
Cheers, Mick G.