search

Toylerrr / Flashforge-for-Cura

This will add the flashforge Creator Pro printer to your cura add printer under the custom tab you have to install the GPX plugin to make it work
13 stars 34 forks source link

Problem with octoprint and Cura with duel filament prints #2

Closed Toylerrr closed 4 years ago

Toylerrr commented 5 years ago

Causing the head to crash the wrong way and not hitting the end stop. maiking it sound like the printer is trying to explode.

valueerrorx commented 5 years ago

eerm... did you fix that already?

did you have a look at those 2 files for flashforge creator pro and dreamer3d ?

those have a little bit different gcode

valueerrorx commented 5 years ago

these files are from Simplify3D which supports flashforge printers

FlashForge Creator Pro.fff.txt FlashForge Dreamer.fff.txt

Toylerrr commented 5 years ago

I'll talk a look at those and see what I can do thanks for the references

On Sat, Aug 31, 2019, 4:40 AM ValueError notifications@github.com wrote:

these files are from Simplify3D which supports flashforge printers

FlashForge Creator Pro.fff.txt https://github.com/Toylerrr/Flashforge-for-Cura/files/3562399/FlashForge.Creator.Pro.fff.txt FlashForge Dreamer.fff.txt https://github.com/Toylerrr/Flashforge-for-Cura/files/3562400/FlashForge.Dreamer.fff.txt

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/Toylerrr/Flashforge-for-Cura/issues/2?email_source=notifications&email_token=ABBSOBVLT4KWZZDEKUD2ENDQHJKBLA5CNFSM4IHK6BVKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD5TLCCI#issuecomment-526823689, or mute the thread https://github.com/notifications/unsubscribe-auth/ABBSOBWAZQER5TUA5WUS6SLQHJKBLANCNFSM4IHK6BVA .

Meins321 commented 5 years ago

Would be nice if you update the readme page with date and maybe the cura version you are using?

Currently Cura 4.2.1 works with single extrusion with this Profile but not Dual..: https://www.thingiverse.com/thing:3569113/files

The Extruder runs to the sides and waits very long to heat up every time.. would be nice to print in one flow!

Toylerrr commented 4 years ago

Fixed in newest version