Closed madd7277727 closed 1 year ago
If you have a UV-K6 with a v3 firmware and you want to use these firmwares, then try to unpack the firmware using qsfirm.py, change the .ver.bin file to say 3.01.26, then repack it using the same tool, and flash it.
https://github.com/amnemonic/Quansheng_UV-K5_Firmware/blob/main/firmware/k5_v3.00.10_flashable.bin https://github.com/amnemonic/Quansheng_UV-K5_Firmware/blob/main/firmware/raws/k5_v3.00.10_(uvk6_0x1FFFF).bin Is there a difference between the two?
https://github.com/amnemonic/Quansheng_UV-K5_Firmware/tree/main/uvmod_kitchen There is a k5_v2.01.26_publish.bin file in it, is it necessary to execute build.bat after renaming, and change the Ver.bin in the temp folder to k5_v3.00.10?
Is there a difference between the two?
Yes. If you flash the one that doesn't say "flashable", you'll brick your radio.
There is a k5_v2.01.26_publish.bin file in it, is it necessary to execute build.bat after renaming, and change the Ver.bin in the temp folder to k5_v3.00.10?
Just run qsfirm.py manually using the same syntax as the build.bat file contains, and between unpacking and repacking, modify the ver.bin file in temp/.
May I ask you, how can I back up my existing firmware? I ran according to your method, but the update program is still wrong, distressed.
What is the error message?
The firmware version does not match, the firmware length is incorrect, this is the wrong firmware.
There is a backup of the firmware on your radio already (it is the "flashable" bin file you mentioned before) but it has been modified to report its version as 2.01.26, so you'd need to modify it back to flash it onto your radio. I can try to do this for you if something breaks.
Please try k5_v3.00.10 to become flashable firmware, please try it.
You are really great, thank you very much, this version can be updated. If I need to expand the 18-1300 experiment, should I use this directly? After the update, I can’t get to 18 after c licking it? (feat: TX 18 to 1300 v 2.01.26)
Hard work, use https://github.com/Tunas1337/UV-K5-Modded-Firmwares/blob/main/k5_V3.00.10_encrypted_18to1300MHz.bin It still doesn't match.
Hard work, use https://github.com/Tunas1337/UV-K5-Modded-Firmwares/blob/main/k5_V3.00.10_encrypted_18to1300MHz.bin
It still doesn't match.
@madd7277727 Are you using UK-K6? This fw version number have not correct from 2 to 3 , so maybe it can used by k5 but not k6.
辛苦了,使用https://github.com/Tunas1337/UV-K5-Modded-Firmwares/blob/main/k5_V3.00.10_encrypted_18to1300MHz.bin 它仍然不匹配。
@madd7277727你用的是UK-K6嗎?這個固件版本號從2到3不正確,所以也許k5可以使用,但k6不能使用。
Hello,3.00.10 is the firmware of K6, before 26 is K5.
辛苦了,使用https://github.com/Tunas1337/UV-K5-Modded-Firmwares/blob/main/k5_V3.00.10_encrypted_18to1300MHz.bin 它仍然不匹配。
@madd7277727你用的是UK-K6嗎?這個固件版本號從2到3不正確,所以也許k5可以使用,但k6不能使用。
Hello,3.00.10 is the firmware of K6, before 26 is K5.
The K5v3 is packed with version 26, this one is packed with version 3.00.10, it should be able to work on UV-K6. I don't have a K6 so I can't help to test.
A correct version has been uploaded so I'll close this issue.
正確的版本已上傳,因此我將關閉此問題。
正確的版本已上傳,因此我將關閉此問題。
Goodjob
辛苦了,使用https://github.com/Tunas1337/UV-K5-Modded-Firmwares/blob/main/k5_V3.00.10_encrypted_18to1300MHz.bin 仍然不匹配。
@madd7277727你用的是UK-K6嗎?這個固件版本號從2到3不正確,所以也許k5可以使用,但k6不能使用。
您好,3.00.10是K6的固件,26之前是K5的固件。
K5v3 打包的是版本 26,這個打包的是版本 3.00.10,它應該能夠在 UV-K6 上工作。我沒有K6所以無法幫助測試。
can work , thank you very much.
Any chance of an update to use it?