im using macro for mesuring only on print area. The only problem is that it mesure from nozzler distance not sensor so all mesurments are way off. What can i change to fix that?
it shoud mesure in the middle of the bed. The print itself is printing in the middle of the bed so thats not offset problem
File opened:ender3/corner_heatbed-cable-cover-clip-Standard_PIF-Standard_ABS_PIF.gcode Size:1769350
17:26:27
File selected
17:27:00
Hyperlapse: frames started (Cycle 30 sec)
17:27:00
print_min: 40.6353,23.9347
17:27:00
print_max: 79.6818,86.8414
17:27:00
last_bed_mesh: 90.4841,82.2341 129.531,145.141
17:27:00
mesh_min: 35.6353,30.0
17:27:00
mesh_max: 84.6818,91.8414
17:27:00
probe_count: 5,5
17:27:01
Generating new points...
17:27:01
bed_mesh: generated points
Index | Tool Adjusted | Probe
17:27:01
0 | (31.9, 20.8) | (35.6, 30.0)
17:27:01
1 | (44.2, 20.8) | (47.9, 30.0)
17:27:01
2 | (56.4, 20.8) | (60.2, 30.0)
17:27:01
3 | (68.7, 20.8) | (72.4, 30.0)
17:27:01
4 | (81.0, 20.8) | (84.7, 30.0)
17:27:01
5 | (81.0, 36.2) | (84.7, 45.5)
17:27:02
6 | (68.7, 36.2) | (72.4, 45.5)
17:27:02
7 | (56.4, 36.2) | (60.2, 45.5)
17:27:02
8 | (44.2, 36.2) | (47.9, 45.5)
17:27:02
9 | (31.9, 36.2) | (35.6, 45.5)
17:27:02
10 | (31.9, 51.7) | (35.6, 60.9)
17:27:02
11 | (44.2, 51.7) | (47.9, 60.9)
17:27:02
12 | (56.4, 51.7) | (60.2, 60.9)
17:27:02
13 | (68.7, 51.7) | (72.4, 60.9)
17:27:02
14 | (81.0, 51.7) | (84.7, 60.9)
17:27:03
15 | (81.0, 67.1) | (84.7, 76.4)
17:27:03
16 | (68.7, 67.1) | (72.4, 76.4)
17:27:03
17 | (56.4, 67.1) | (60.2, 76.4)
17:27:03
18 | (44.2, 67.1) | (47.9, 76.4)
17:27:03
19 | (31.9, 67.1) | (35.6, 76.4)
17:27:03
20 | (31.9, 82.6) | (35.6, 91.8)
17:27:03
21 | (44.2, 82.6) | (47.9, 91.8)
17:27:03
22 | (56.4, 82.6) | (60.2, 91.8)
17:27:03
23 | (68.7, 82.6) | (72.4, 91.8)
17:27:04
24 | (81.0, 82.6) | (84.7, 91.8)
17:27:05
probe at 31.919,20.750 is z=2.990500
17:27:05
probe at 31.919,20.750 is z=2.990500
17:27:09
probe at 44.190,20.750 is z=2.970500
17:27:10
probe at 44.190,20.750 is z=2.968000
17:27:13
probe at 56.448,20.750 is z=2.960500
17:27:15
probe at 56.448,20.750 is z=2.945500
17:27:18
probe at 68.706,20.750 is z=3.000500
17:27:19
probe at 68.706,20.750 is z=3.000500
17:27:22
probe at 80.965,20.750 is z=2.945500
17:27:24
probe at 80.965,20.750 is z=2.965500
17:27:27
probe at 80.965,36.207 is z=2.930500
17:27:28
probe at 80.965,36.207 is z=2.938000
17:27:32
probe at 68.706,36.207 is z=2.960500
17:27:33
probe at 68.706,36.207 is z=2.960500
17:27:36
probe at 56.448,36.207 is z=2.948000
17:27:37
probe at 56.448,36.207 is z=2.950500
17:27:41
probe at 44.190,36.207 is z=2.935500
17:27:42
probe at 44.190,36.207 is z=2.943000
17:27:45
probe at 31.919,36.207 is z=2.938000
17:27:47
probe at 31.919,36.207 is z=2.948000
17:27:50
probe at 31.919,51.664 is z=2.953000
17:27:51
probe at 31.919,51.664 is z=2.953000
17:27:55
probe at 44.190,51.664 is z=2.978000
17:27:56
probe at 44.190,51.664 is z=2.948000
17:27:59
probe at 56.448,51.664 is z=2.930500
17:28:00
probe at 56.448,51.664 is z=2.938000
17:28:04
probe at 68.706,51.664 is z=2.940500
17:28:05
probe at 68.706,51.664 is z=2.930500
17:28:08
probe at 80.965,51.664 is z=2.930500
17:28:09
probe at 80.965,51.664 is z=2.938000
17:28:13
probe at 80.965,67.134 is z=2.903000
17:28:14
probe at 80.965,67.134 is z=2.888000
17:28:17
probe at 68.706,67.134 is z=2.905500
17:28:19
probe at 68.706,67.134 is z=2.908000
17:28:22
probe at 56.448,67.134 is z=2.903000
17:28:23
probe at 56.448,67.134 is z=2.920500
17:28:27
probe at 44.190,67.134 is z=2.905500
17:28:28
probe at 44.190,67.134 is z=2.898000
17:28:31
probe at 31.919,67.134 is z=2.925500
17:28:32
probe at 31.919,67.134 is z=2.920500
17:28:36
probe at 31.919,82.591 is z=2.923000
17:28:37
probe at 31.919,82.591 is z=2.948000
17:28:40
probe at 44.190,82.591 is z=2.888000
17:28:42
probe at 44.190,82.591 is z=2.893000
17:28:45
probe at 56.448,82.591 is z=2.895500
17:28:46
probe at 56.448,82.591 is z=2.900500
17:28:50
probe at 68.706,82.591 is z=2.918000
17:28:51
probe at 68.706,82.591 is z=2.905500
17:28:54
probe at 80.965,82.591 is z=2.910500
17:28:55
probe at 80.965,82.591 is z=2.915500
17:28:56
Mesh Bed Leveling Complete
im using macro for mesuring only on print area. The only problem is that it mesure from nozzler distance not sensor so all mesurments are way off. What can i change to fix that? it shoud mesure in the middle of the bed. The print itself is printing in the middle of the bed so thats not offset problem
File opened:ender3/corner_heatbed-cable-cover-clip-Standard_PIF-Standard_ABS_PIF.gcode Size:1769350 17:26:27 File selected 17:27:00 Hyperlapse: frames started (Cycle 30 sec) 17:27:00 print_min: 40.6353,23.9347 17:27:00 print_max: 79.6818,86.8414 17:27:00 last_bed_mesh: 90.4841,82.2341 129.531,145.141 17:27:00 mesh_min: 35.6353,30.0 17:27:00 mesh_max: 84.6818,91.8414 17:27:00 probe_count: 5,5 17:27:01 Generating new points... 17:27:01 bed_mesh: generated points Index | Tool Adjusted | Probe 17:27:01 0 | (31.9, 20.8) | (35.6, 30.0) 17:27:01 1 | (44.2, 20.8) | (47.9, 30.0) 17:27:01 2 | (56.4, 20.8) | (60.2, 30.0) 17:27:01 3 | (68.7, 20.8) | (72.4, 30.0) 17:27:01 4 | (81.0, 20.8) | (84.7, 30.0) 17:27:01 5 | (81.0, 36.2) | (84.7, 45.5) 17:27:02 6 | (68.7, 36.2) | (72.4, 45.5) 17:27:02 7 | (56.4, 36.2) | (60.2, 45.5) 17:27:02 8 | (44.2, 36.2) | (47.9, 45.5) 17:27:02 9 | (31.9, 36.2) | (35.6, 45.5) 17:27:02 10 | (31.9, 51.7) | (35.6, 60.9) 17:27:02 11 | (44.2, 51.7) | (47.9, 60.9) 17:27:02 12 | (56.4, 51.7) | (60.2, 60.9) 17:27:02 13 | (68.7, 51.7) | (72.4, 60.9) 17:27:02 14 | (81.0, 51.7) | (84.7, 60.9) 17:27:03 15 | (81.0, 67.1) | (84.7, 76.4) 17:27:03 16 | (68.7, 67.1) | (72.4, 76.4) 17:27:03 17 | (56.4, 67.1) | (60.2, 76.4) 17:27:03 18 | (44.2, 67.1) | (47.9, 76.4) 17:27:03 19 | (31.9, 67.1) | (35.6, 76.4) 17:27:03 20 | (31.9, 82.6) | (35.6, 91.8) 17:27:03 21 | (44.2, 82.6) | (47.9, 91.8) 17:27:03 22 | (56.4, 82.6) | (60.2, 91.8) 17:27:03 23 | (68.7, 82.6) | (72.4, 91.8) 17:27:04 24 | (81.0, 82.6) | (84.7, 91.8) 17:27:05 probe at 31.919,20.750 is z=2.990500 17:27:05 probe at 31.919,20.750 is z=2.990500 17:27:09 probe at 44.190,20.750 is z=2.970500 17:27:10 probe at 44.190,20.750 is z=2.968000 17:27:13 probe at 56.448,20.750 is z=2.960500 17:27:15 probe at 56.448,20.750 is z=2.945500 17:27:18 probe at 68.706,20.750 is z=3.000500 17:27:19 probe at 68.706,20.750 is z=3.000500 17:27:22 probe at 80.965,20.750 is z=2.945500 17:27:24 probe at 80.965,20.750 is z=2.965500 17:27:27 probe at 80.965,36.207 is z=2.930500 17:27:28 probe at 80.965,36.207 is z=2.938000 17:27:32 probe at 68.706,36.207 is z=2.960500 17:27:33 probe at 68.706,36.207 is z=2.960500 17:27:36 probe at 56.448,36.207 is z=2.948000 17:27:37 probe at 56.448,36.207 is z=2.950500 17:27:41 probe at 44.190,36.207 is z=2.935500 17:27:42 probe at 44.190,36.207 is z=2.943000 17:27:45 probe at 31.919,36.207 is z=2.938000 17:27:47 probe at 31.919,36.207 is z=2.948000 17:27:50 probe at 31.919,51.664 is z=2.953000 17:27:51 probe at 31.919,51.664 is z=2.953000 17:27:55 probe at 44.190,51.664 is z=2.978000 17:27:56 probe at 44.190,51.664 is z=2.948000 17:27:59 probe at 56.448,51.664 is z=2.930500 17:28:00 probe at 56.448,51.664 is z=2.938000 17:28:04 probe at 68.706,51.664 is z=2.940500 17:28:05 probe at 68.706,51.664 is z=2.930500 17:28:08 probe at 80.965,51.664 is z=2.930500 17:28:09 probe at 80.965,51.664 is z=2.938000 17:28:13 probe at 80.965,67.134 is z=2.903000 17:28:14 probe at 80.965,67.134 is z=2.888000 17:28:17 probe at 68.706,67.134 is z=2.905500 17:28:19 probe at 68.706,67.134 is z=2.908000 17:28:22 probe at 56.448,67.134 is z=2.903000 17:28:23 probe at 56.448,67.134 is z=2.920500 17:28:27 probe at 44.190,67.134 is z=2.905500 17:28:28 probe at 44.190,67.134 is z=2.898000 17:28:31 probe at 31.919,67.134 is z=2.925500 17:28:32 probe at 31.919,67.134 is z=2.920500 17:28:36 probe at 31.919,82.591 is z=2.923000 17:28:37 probe at 31.919,82.591 is z=2.948000 17:28:40 probe at 44.190,82.591 is z=2.888000 17:28:42 probe at 44.190,82.591 is z=2.893000 17:28:45 probe at 56.448,82.591 is z=2.895500 17:28:46 probe at 56.448,82.591 is z=2.900500 17:28:50 probe at 68.706,82.591 is z=2.918000 17:28:51 probe at 68.706,82.591 is z=2.905500 17:28:54 probe at 80.965,82.591 is z=2.910500 17:28:55 probe at 80.965,82.591 is z=2.915500 17:28:56 Mesh Bed Leveling Complete
