search

Turge08 / print_area_bed_mesh

Create bed mesh for print area only
212 stars 40 forks source link

slicer param print min & max cannot be passed to klipper #36

Open coolouba opened 2 years ago

coolouba commented 2 years ago

thanks for your awesome work! i follow every step in the readme doc but klipper did not get the param in prusaslicer start gcode msg in fluidd console is:

// Unknown command:"PRINT_MIN=56.0803,51.7303"

// Unknown command:"PRINT_MAX=198.92,128.27"

any help will be appreciate，thx

1.code in slicer（prusa slicer 2.5.0） start code zone: PRINT_MIN={first_layer_print_min[0]},{first_layer_print_min[1]} PRINT_MAX={first_layer_print_max[0]},{first_layer_print_max[1]} PRINT_START 2.code in printer.cfg [gcode_macro PRINT_START] gcode: G92 E0 SET_GCODE_OFFSET Z=0 G28 CLEAN_NOZZLE BED_MESH_CLEAR STATUS_HOMING G28 STATUS_CLEANING CLEAN_NOZZLE G28 Z0 STATUS_MESHING BED_MESH_CALIBRATE PRINT_MIN={params.PRINT_MIN} PRINT_MAX={params.PRINT_MAX} FORCE_NEW_MESH=True STATUS_CALIBRATING_Z CALIBRATE_Z G28 X0 G28 Y0 STATUS_BUSY M117 Printing