sshanbhag
commented
7 years ago Hello,
Unfortunately, TytoLogy was built on the assumption of 1 or 2 speakers at the most. The calibration programs are therefore unable to be used to calibrate using a microphone array.
Some of the lower-level functions could be used for an array, but it would require some programming to tie everything together.
Cheers, Sharad
From: jingxuan9862 notifications@github.com Reply-To: TytoLogy/Calibrate reply@reply.github.com Date: Monday, May 8, 2017 at 3:54 AM To: TytoLogy/Calibrate Calibrate@noreply.github.com Cc: Subscribed subscribed@noreply.github.com Subject: [TytoLogy/Calibrate] calibration for micrphone arrays (#1)
Hi , I'm interested in the TytoLogy ,but I don't find some documents about the Calibrate. could you please tell me can I use the Calibrate or other projects in TytoLogy to calibrate micrphone arrays (It is a uniform circular array with six micropheons and the diameter is 77mm)?and what should I do?
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHubhttps://github.com/TytoLogy/Calibrate/issues/1, or mute the threadhttps://github.com/notifications/unsubscribe-auth/ACFXS9mMm-Qr6nWyAFJpMPS--9QOUMKuks5r3sozgaJpZM4NTmsg.
Hi , I'm interested in the TytoLogy ,but I don't find some documents about the Calibrate. could you please tell me can I use the Calibrate or other projects in TytoLogy to calibrate micrphone arrays (It is a uniform circular array with six micropheons and the diameter is 77mm)?and what should I do?