UCSD-E4E ASM-docs issues

UCSD-E4E / ASM-docs

Aye-aye Sleep Monitoring Project Documentation

2 stars 0 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Need finger relief around the On-Box Sensor Unit's SD Card

#65 ntlhui closed 1 year ago
0
Remote Sensor Node not saving data

#64 ntlhui closed 3 years ago
2
Power Supplies Outside of Box for Remote Sensor unit

#63 ghost opened 3 years ago
0
lens hole too tight

#62 ntlhui closed 1 year ago
0
Pi Camera Focus Procedure

#61 ntlhui closed 1 year ago
0
On Box Assy Rev XA06

#60 ntlhui opened 3 years ago
0
On Box Rev XA05

#59 ntlhui closed 3 years ago
0
HW: Need to create post-processing drill table

#58 ntlhui closed 3 years ago
2
HW: Lens Enclosure thread size

#57 ntlhui closed 3 years ago
5
HW: Pi camera rear screw interference

#56 ntlhui closed 3 years ago
1
HW: Pi Camera M2 holes failing during installation

#55 ntlhui closed 3 years ago
2
HW: Nano microUSB doesn't fit

#54 ntlhui closed 1 year ago
4
HW: ASM On-Box Base Plate too thick

#53 ntlhui closed 3 years ago
1
Linux Box Setup for Data Server Prototyping

#52 ntlhui closed 3 years ago
0
Timestamp Format

#51 ntlhui closed 3 years ago
1
Bench Configuration 1.0.2

#50 ntlhui closed 3 years ago
1
Initial Hardware Build

#49 ntlhui closed 2 years ago
0
System Security

#48 ntlhui opened 4 years ago
0
Initial System Design

#47 ntlhui closed 2 years ago
0
SYS.17.A: This Raspberry Pi 4 shall forward data from the IP camera to the Data Server (1)

#46 ntlhui closed 2 years ago
0
SYS.16.D: This housing shall provide the necessary protection to the power supply for the IP Camera (2)

#45 ntlhui opened 4 years ago
0
SYS.16.C: This housing shall mount the IP Camera (2) such that the camera has a clear view of the enclosure areas

#44 ntlhui closed 2 years ago
0
SYS.16.B: This housing shall provide a port for the IP Camera (2)

#43 ntlhui opened 4 years ago
0
SYS.16.A: This housing shall provide protection against the aye-aye’s claws and teeth

#42 ntlhui opened 4 years ago
0
SYS.15.D: This housing shall provide the necessary protection to the power supply for the Raspberry Pi 4 (3)

#41 ntlhui opened 4 years ago
0
SYS.15.C: This housing shall mount the Pi IR Camera (4) and NIR illumination such that the camera has a clear view of the nest box and aye-aye

#40 ntlhui opened 4 years ago
0
SYS.15.B: This housing shall provide a port for the Pi IR Camera (4) and NIR illumination

#39 ntlhui opened 4 years ago
0
SYS.15.A: This housing shall provide protection against the aye-aye’s claws and teeth

#38 ntlhui closed 2 years ago
0
SYS.14.C: This housing shall provide the necessary protection to the power supply for the Arduino Nano BLE Sense (7).

#37 ntlhui opened 4 years ago
0
SYS.14.B: This housing shall provide strong mechanical coupling from the nest box to the Arduino Nano BLE Sense (7).

#36 ntlhui opened 4 years ago
0
SYS.14.A: This housing shall provide protection against the aye-aye’s claws and teeth

#35 ntlhui closed 2 years ago
0
SYS.8.D: The router shall be able to automatically reconfigure the network from an unplanned power down.

#34 ntlhui closed 2 years ago
0
SYS.8.C: The router shall be able to automatically reconfigure the network as more units are added to the network.

#33 ntlhui opened 4 years ago
0
SYS.8.B: The router shall be able to automatically configure the network and dynamically provision endpoints to multiple IP Cameras (2) and Raspberry Pi 4s (3).

#32 ntlhui opened 4 years ago
1
SYS.8.A: The router(s) shall provide route data from the IP Camera (2) and the Raspberry Pi 4 (3) to the Data Server (1)

#31 ntlhui closed 2 years ago
1
SYS.6.B: The Microphone shall have a characterized frequency response.

#26 ntlhui opened 4 years ago
0
SYS.6.A: The Microphone shall pick up sound from the aye-aye’s nest box and feed it to the USB Sound Card (5) via the Coax cable (13).

#25 ntlhui closed 4 years ago
0
SYS.5.B: The USB Sound Card shall provide a digital signal at a rate sufficient to detect aye-aye vocalizations.

#24 ntlhui closed 3 years ago
1
SYS.5.A: The USB Sound Card shall digitize the signal from the Microphone (6) and stream it to the Raspberry Pi 4 (3).

#23 ntlhui closed 4 years ago
0
SYS.4.B: The Pi IR Camera shall have a FOV wide enough to cover the bottom of the aye-aye enclosure.

#22 ntlhui closed 4 years ago
1
SYS.4.A: The Pi IR Camera shall transmit video to the Data Server (1) via the Router(8) and the Raspberry Pi 4 (3)

#21 ntlhui closed 4 years ago
0
System Usability

#19 ntlhui opened 4 years ago
0
System Reliability Requirements

#18 ntlhui opened 4 years ago
0
SYS.2.A: The IP Camera shall transmit video to the Data Server (1) via the Router (8)

#7 ntlhui closed 2 years ago
2