Design Internal Electronics Mounting

[ModeratelyGreek]

The internal electronics of the fuselage need to be accessible in the field, but also stable in flight. Any mounting apparatus or technique should be lightweight.

Currently the discussion revolves around

• Velcro pads (battery)
• A hole in the roof of the fuselage (that needs to be positioned around the wing axis)
• Bolting down some sensors (Navio / Pi stack need to be rigidly mounted)

Critically, the battery's position has a significant impact on the CoM, and should be positioned such that small deviations do not risk pushing the center of mass behind the center of drag.

[zorarkdouble8]

I've done the Navio / Pi case:

The red part gets attached to the fusalage and then snaps into the blue part. The Rasberry Pi and Navio case is screwed together (green, yellow, and blue parts).

Any suggestions on improving the design are welcome!