search

UP3D-gcode / UP3D

UP 3D Printer Tools
GNU General Public License v2.0
26 stars 6 forks source link

slic3r configuration #13

Open excogitation opened 7 years ago

excogitation commented 7 years ago

how about adding a working slic3r configuration file to ease getting started?

Jonchua commented 7 years ago

I have difficulty with slic3r also. The print head is at a large distance from the print platform surface even after adjusting the nozzle height parameter.

mvadu commented 6 years ago

I did create one for my Cetus. Not sure if its same for other TierTime printers. https://www.thingiverse.com/thing:3045287

maslovw commented 6 years ago

@mvadu, your configuration is for UPStudio. This project is a bit different, here people tried to reverse-engineer tiertime printers and make GCode -> upcode interpreter. It was started before UPStudio had GCode support

Ljun-1994 commented 1 year ago

I did create one for my Cetus. Not sure if its same for other TierTime printers. https://www.thingiverse.com/thing:3045287

Hello, may I ask if you need to modify the firmware for Prusa slicing?

mvadu commented 1 year ago

I did create one for my Cetus. Not sure if its same for other TierTime printers. https://www.thingiverse.com/thing:3045287

Hello, may I ask if you need to modify the firmware for Prusa slicing?

No, this was with default tier time firmware.. It's just config you import into sli3r (there was no Prusa Slicer when I did this) and generate gcode. Which you then import into up studio and print..

Ljun-1994 commented 1 year ago

I did create one for my Cetus. Not sure if its same for other TierTime printers. https://www.thingiverse.com/thing:3045287

Hello, may I ask if you need to modify the firmware for Prusa slicing?

No, this was with default tier time firmware.. It's just config you import into sli3r (there was no Prusa Slicer when I did this) and generate gcode. Which you then import into up studio and print..

image image My UP BOX+and UP Plus 2

Is it okay to set the image like this?