search

Ultimaker / Cura

3D printer / slicing GUI built on top of the Uranium framework
GNU Lesser General Public License v3.0
6.18k stars 2.08k forks source link

Unexpected Slicing Bug #12910

Open I522I opened 2 years ago

I522I commented 2 years ago

Application Version

5.1.0

Platform

Win 10, R5 5600X, RX590, 16GB

Printer

Artillery Genius

Reproduction steps

  1. Load model
  2. start slicing

Actual results

Unexpected Error; no slicing; I should report the bug, the error said.

Expected results

succesfully slicing.

Checklist of files to include

Additional information & file uploads

cura.log AG_toothless.zip

GregValiant commented 2 years ago

Thanks for the report. The 3mf file you included is not a project file so it's hard to tell what is going on without having your settings. Use the "File | Save Project" command and that type of 3mf file will include your printer, the model, and your settings.

I522I commented 2 years ago

Oh, sorry, dont know, why its not a project, but now it is. I checked. Slicing still not working, so a system restart is not the solution. ;) AG_toothless.zip

GregValiant commented 2 years ago

Thanks for that. That model consists of 21 separate meshes and although it is water-tight there are errors. I opened the file in MS 3D Builder and it noted errors in the model and repaired them. It still would not slice. I then merged the 21 separate pieces in 3D Builder and the model finally sliced. So this is a problem with the model. The way it was put together without being merged was odd. I'll leave this open for a bit so you can respond but I don't see a bug here.

I522I commented 2 years ago

Ok, well, thank you. I didn't see that as a reason, cause I have the mesh analysing plugin (don't know the exactly name, I'm not at home) installed and the Plugin didn't show any problems. But I don't know if the plugin is from Ultimaker or third party. So thanks for Ur fast analyse of my files!

GregValiant commented 2 years ago

In the Mesh Tools section of the Cura settings, if you turn off "Union overlapping Volumes" and turn on "Remove all Holes" it will slice, but the slice is weird. The toes don't get connected and there is something strange about the eyes as well. This model was not assembled correctly. The best bet is to merge all the separate pieces using another piece of software as I described above. This is the best I could do just with Cura. This would fall apart as the separate pieces don't go together well. Untitled