Slicing error

[IJMFDavis]

Application Version

5.1.0

Platform

windows 11

Printer

Creality CR-6 SE

Reproduction steps

I tried to print CR6SE_Christmas_Ball_Lattice_with_Small_Twist(1) from thingyverse It then came up with a slicing error. Tried it in Creality slicer 4.2.8 and it took ages for it to slice but it seemed to work. Could be the model. I was just bored and wanted something to print. Christmas_Ball_Lattice_with_Small_Twist(1).zip e

Actual results

Couldn't print with Cura.

Expected results

For it to print

Checklist of files to include

• [X] Log file
• [X] Project file

Additional information & file uploads

cura.log

[GregValiant]

Thanks for the report. There are errors in the model. I was able to repair it using MS 3D Builder.
I'll leave this as a bug report but it does appear that the model has problems. Here is the repaired file. Let us know if you can slice this one. Repaired_Christmas_Ball.zip

[IJMFDavis]

Hi Greg,

Thanks for coming back so quickly. To be honest I wasn’t expecting a reply.

Thank you for fixing the model. I’ll give it a go and let you know.

Stay chilled!

Many Thanks

Ian Davis

On 10 Aug 2022, at 04:06, GregValiant @.***> wrote:

 Thanks for the report. There are errors in the model. I was able to repair it using MS 3D Builder. I'll leave this as a bug report but it does appear that the model has problems. Here is the repaired file. Let us know if you can slice this one. Repaired_Christmas_Ball.zip

— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you authored the thread.

[IJMFDavis]

Hi Greg,                  Bad news sadly. I tried to slice the model again and it still won’t work. Same error.  Any Ideas?  Many Thanks Ian Davis07960 877 220 From: Ian DavisSent: 10 August 2022 20:31To: Ultimaker/CuraCc: Ultimaker/Cura; AuthorSubject: Re: [Ultimaker/Cura] Slicing error (Issue #12991) Hi Greg,  Thanks for coming back so quickly. To be honest I wasn’t expecting a reply.  Thank you for fixing the model. I’ll give it a go and let you know.  Stay chilled! Many Thanks Ian DavisOn 10 Aug 2022, at 04:06, GregValiant ***@***.***> wrote:Thanks for the report.There are errors in the model. I was able to repair it using MS 3D Builder.I'll leave this as a bug report but it does appear that the model has problems.Here is the repaired file. Let us know if you can slice this one.Repaired_Christmas_Ball.zip—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: ***@***.***> 

[GregValiant]

I'm not having a problem with it. Here are two gcode files to give you something to do. One is with supports on the inside and the other is "touching build plate". I don't know what your preferred temperatures are. You should open the gcode files in a text editor and check the M104, M109, M140 and M190 lines at the beginning. They set the temperatures. 2-Christmas_Ball.zip

[IJMFDavis]

Hey Greg,

Wow, thank you so much. I really didn’t expect any of this. It’s like going back 40 years and dealing with someone with good customer service who actually cares.

That worked a treat. It’s printing now. Let’s see what happens.

Thanks again though, you’re a star.

Have a good week.

Many Thanks

Ian Davis

On 14 Aug 2022, at 22:40, GregValiant @.***> wrote:

 I'm not having a problem with it. Here are two gcode files to give you something to do. One is with supports on the inside and the other is "touching build plate". I don't know what your preferred temperatures are. You should open the gcode files in a text editor and check the M104, M109, M140 and M190 lines at the beginning. They set the temperatures. 2-Christmas_Ball.zip

— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you authored the thread.

[GregValiant]

As Red Green always said..."Men, we're all in this together." Of course he was talking about marriage and not 3D printing, but it seems appropriate.