Open astrokahuna opened 1 year ago
Thanks for the report. There are certain models that simply aren't suitable for 3D printing. This model isn't very large but contains 5.3million vertices and 1.8million triangles. That is a fairly ridiculous density/resolution. The guard rails that are on some of the platforms are especially troublesome to print.
The model is watertight but has a lot of other errors (duplicate faces, degenerate faces, etc.). I couldn't get MeshMixer to work with it. Cura never finished slicing with your UM S3 printer active. I was able to repair the file with MS 3D Builder.
I configured my Ender as a dual extruder printer and after moving the model away from the build plate midpoint and rotating the model (that is a known bug) I did get the repaired model to slice at a 0.2 Layer Height.
So there are multiple things going on here. The model itself is a PITA to work with as well as having errors, but I think there may be something going on with the Ultimaker S3 and your Normal profile as well. In addition there is the "won't slice when centered" bug which has come up numerous times with Cura 5.1.
Someone from the Cura Team (@MariMakes ?) will take a look at this.
The chances of this guys mustache printing are not good.
Thanks for the response Greg. Moving the model off-center solved the issue.
Cheers Dennis
Dr. Dennis R. Crabtree Director Emeritus, Dominion Astrophysical Observatory / Directeur émérite Observatoire federal d’astrophysique - W̱SÁNEĆ and Lkwungen traditional territory Herzberg Astronomy & Astrophysics / Herzberg astronomie & astrophysique National Research Council / Conseil national de recherches Canada
From: GregValiant @. Sent: September 2, 2022 12:04 PM To: Ultimaker/Cura @.> Cc: Crabtree, Dennis @.>; Author @.> Subject: Re: [Ultimaker/Cura] Unexpected error while slicing (Issue #13194)
Attention This email originated from outside of the NRC. Attention Ce courriel provient de l'extérieur du CNRC.
Thanks for the report. There are certain models that simply aren't suitable for 3D printing. This model isn't very large but contains 5.3million vertices and 1.8million triangles. That is a fairly ridiculous density/resolution. The guard rails that are on some of the platforms are especially troublesome to print.
The model is watertight but has a lot of other errors (duplicate faces, degenerate faces, etc.). I couldn't get MeshMixer to work with it. Cura never finished slicing with your UM S3 printer active. I was able to repair the file with MS 3D Builder.
I configured my Ender as a dual extruder printer and after moving the model away from the build plate midpoint and rotating the model (that is a known bug) I did get the repaired model to slice at a 0.2 Layer Height. [image]https://user-images.githubusercontent.com/64202104/188216969-fb0654b5-2827-4503-baec-c4d3396886fd.png
So there are multiple things going on here. The model itself is a PITA to work with as well as having errors, but I think there may be something going on with the Ultimaker S3 and your Normal profile as well. In addition there is the "won't slice when centered" bug which has come up numerous times with Cura 5.1.
Someone from the Cura Team @.***https://github.com/MariMakes ?) will take a look at this.
— Reply to this email directly, view it on GitHubhttps://github.com/Ultimaker/Cura/issues/13194#issuecomment-1235817696, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ALBPS4FAJRZTUOYC76ORNBDV4JFS5ANCNFSM6AAAAAAQDMRPL4. You are receiving this because you authored the thread.Message ID: @.**@.>>
Application Version
5.1.0
Platform
Windows 10
Printer
Ultimaker 3
Reproduction steps
Error while slicing model
Actual results
Slicing failed
Expected results
Slicing would have completed
Checklist of files to include
Additional information & file uploads
Link to project file: https://nrchaa-my.sharepoint.com/:u:/g/personal/denniscrabtree_nrchaa_onmicrosoft_com/EXSqwHmcF2VIs30hfbiONV4BeBTbCBIb4QqPPQ1-lx2yyQ?e=qB6rer
stderr.log