Open Barkingmad15 opened 1 year ago
Thanks for the report and the file. I can duplicate the problem. At .28 Initial Layer Height it slices again. Someone from the Cura team will take a look.
Those threads are going to need support. I thought this model looked better with normal supports. A side benefit is that the print time goes down by 30 minutes.
Application Version
5.3.0
Platform
Windows 11
Printer
Creality Ender 3 V2 Neo
Reproduction steps
Opened an STL file into Cura, sliced the file & then changed the layer height from 0.2 to 0.28 & re-sliced so I could see the time difference. It was at the re-slicing stage it failed & asked me to send a bug report. 0_00Base-Edited_028_Eryone_Eryone_PLA+.zip cura.log
Actual results
Cura screen shows slicing & stalls about half way & after a few seconds displays an error message.![Screenshot (2)](https://user-images.githubusercontent.com/116904142/233042663-fb3b2b38-9d6f-41b5-8a4c-d3dc7a80a014.png)
Expected results
Sliced model ready to upload to Moonraker
Checklist of files to include
Additional information & file uploads
Cura appears to be acting normally on other files. I don't think it's an issue with the file as it slices at lower layer heights.